The patch titled
Documentation/dvb/bt8xx.txt update
has been removed from the -mm tree. Its filename was
documentation-dvb-bt8xxtxt-update.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: Documentation/dvb/bt8xx.txt update
From: "Uwe Bugla" <uwe.bugla@xxxxxx>
This patch synchronizes the Documentation for bt8xx-based cards to the
actual state of kernel 2.6.22-rc1.
Signed-off-by: Uwe Bugla <uwe.bugla@xxxxxx>
Signed-off-by: Manu Abraham <manu@xxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/dvb/bt8xx.txt | 32 ++++++++++++++++++++------------
1 files changed, 20 insertions(+), 12 deletions(-)
diff -puN Documentation/dvb/bt8xx.txt~documentation-dvb-bt8xxtxt-update Documentation/dvb/bt8xx.txt
--- a/Documentation/dvb/bt8xx.txt~documentation-dvb-bt8xxtxt-update
+++ a/Documentation/dvb/bt8xx.txt
@@ -9,19 +9,29 @@ for accessing the i2c bus and the gpio p
Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge:
Compiling kernel please enable:
-a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux"
-b.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
- => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
+a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Enable Video for Linux API 1 (DEPRECATED)"
+b.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Video Capture Adapters" => "BT848 Video For Linux"
+c.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
+
+Please use the following options with care as deselection of drivers which are in fact necessary
+may result in DVB devices that cannot be tuned due to lack of driver support:
+You can save RAM by deselecting every frontend module that your DVB card does not need.
+
+First please remove the static dependency of DVB card drivers on all frontend modules for all possible card variants by enabling:
+d.) "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Load and attach frontend modules as needed"
+
+If you know the frontend driver that your card needs please enable:
+e.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Customise DVB Frontends" => "Customise the frontend modules to build"
+ Then please select your card-specific frontend module.
2) Loading Modules
==================
-In default cases bttv is loaded automatically.
-To load the backend either place dvb-bt8xx in etc/modules, or apply manually:
-
- $ modprobe dvb-bt8xx
-
-All frontends will be loaded automatically.
+Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically.
+Exceptions are:
+- Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom.
People running udev please see Documentation/dvb/udev.txt.
In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary:
@@ -30,7 +40,6 @@ In the following cases overriding the PC
------------------------------
$ modprobe bttv card=113
- $ modprobe dvb-bt8xx
$ modprobe dst
Useful parameters for verbosity level and debugging the dst module:
@@ -65,10 +74,9 @@ DViCO FusionHDTV 5 Lite: 135
Notice: The order of the card ID should be uprising:
Example:
$ modprobe bttv card=113 card=135
- $ modprobe dvb-bt8xx
For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
-In case of further problems send questions to the mailing list: www.linuxdvb.org.
+In case of further problems please subscribe and send questions to the mailing list: linux-dvb@xxxxxxxxxxxx
Authors: Richard Walker,
Jamie Honan,
_
Patches currently in -mm which might be from uwe.bugla@xxxxxx are
git-dvb.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
