The patch titled
forcedeth: add vitesse phy
has been added to the -mm tree. Its filename is
forcedeth-add-vitesse-phy.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: forcedeth: add vitesse phy
From: Ayaz Abdulla <aabdulla@xxxxxxxxxx>
This patch adds errata support for the vitesse phy.
Signed-off-by: Ayaz Abdulla <aabdulla@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/net/forcedeth.c | 108 ++++++++++++++++++++++++++++++++++----
1 file changed, 98 insertions(+), 10 deletions(-)
diff -puN drivers/net/forcedeth.c~forcedeth-add-vitesse-phy drivers/net/forcedeth.c
--- a/drivers/net/forcedeth.c~forcedeth-add-vitesse-phy
+++ a/drivers/net/forcedeth.c
@@ -550,6 +550,7 @@ union ring_type {
/* PHY defines */
#define PHY_OUI_MARVELL 0x5043
#define PHY_OUI_CICADA 0x03f1
+#define PHY_OUI_VITESSE 0x01c1
#define PHYID1_OUI_MASK 0x03ff
#define PHYID1_OUI_SHFT 6
#define PHYID2_OUI_MASK 0xfc00
@@ -557,12 +558,29 @@ union ring_type {
#define PHYID2_MODEL_MASK 0x03f0
#define PHY_MODEL_MARVELL_E3016 0x220
#define PHY_MARVELL_E3016_INITMASK 0x0300
-#define PHY_INIT1 0x0f000
-#define PHY_INIT2 0x0e00
-#define PHY_INIT3 0x01000
-#define PHY_INIT4 0x0200
-#define PHY_INIT5 0x0004
-#define PHY_INIT6 0x02000
+#define PHY_CICADA_INIT1 0x0f000
+#define PHY_CICADA_INIT2 0x0e00
+#define PHY_CICADA_INIT3 0x01000
+#define PHY_CICADA_INIT4 0x0200
+#define PHY_CICADA_INIT5 0x0004
+#define PHY_CICADA_INIT6 0x02000
+#define PHY_VITESSE_INIT_REG1 0x1f
+#define PHY_VITESSE_INIT_REG2 0x10
+#define PHY_VITESSE_INIT_REG3 0x11
+#define PHY_VITESSE_INIT_REG4 0x12
+#define PHY_VITESSE_INIT_MSK1 0xc
+#define PHY_VITESSE_INIT_MSK2 0x0180
+#define PHY_VITESSE_INIT1 0x52b5
+#define PHY_VITESSE_INIT2 0xaf8a
+#define PHY_VITESSE_INIT3 0x8
+#define PHY_VITESSE_INIT4 0x8f8a
+#define PHY_VITESSE_INIT5 0xaf86
+#define PHY_VITESSE_INIT6 0x8f86
+#define PHY_VITESSE_INIT7 0xaf82
+#define PHY_VITESSE_INIT8 0x0100
+#define PHY_VITESSE_INIT9 0x8f82
+#define PHY_VITESSE_INIT10 0x0
+
#define PHY_GIGABIT 0x0100
#define PHY_TIMEOUT 0x1
@@ -1141,14 +1159,14 @@ static int phy_init(struct net_device *d
/* phy vendor specific configuration */
if ((np->phy_oui == PHY_OUI_CICADA) && (phyinterface & PHY_RGMII) ) {
phy_reserved = mii_rw(dev, np->phyaddr, MII_RESV1, MII_READ);
- phy_reserved &= ~(PHY_INIT1 | PHY_INIT2);
- phy_reserved |= (PHY_INIT3 | PHY_INIT4);
+ phy_reserved &= ~(PHY_CICADA_INIT1 | PHY_CICADA_INIT2);
+ phy_reserved |= (PHY_CICADA_INIT3 | PHY_CICADA_INIT4);
if (mii_rw(dev, np->phyaddr, MII_RESV1, phy_reserved)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, MII_NCONFIG, MII_READ);
- phy_reserved |= PHY_INIT5;
+ phy_reserved |= PHY_CICADA_INIT5;
if (mii_rw(dev, np->phyaddr, MII_NCONFIG, phy_reserved)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
@@ -1156,12 +1174,82 @@ static int phy_init(struct net_device *d
}
if (np->phy_oui == PHY_OUI_CICADA) {
phy_reserved = mii_rw(dev, np->phyaddr, MII_SREVISION, MII_READ);
- phy_reserved |= PHY_INIT6;
+ phy_reserved |= PHY_CICADA_INIT6;
if (mii_rw(dev, np->phyaddr, MII_SREVISION, phy_reserved)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
+ if (np->phy_oui == PHY_OUI_VITESSE) {
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT2)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
+ phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
+ phy_reserved |= PHY_VITESSE_INIT3;
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT4)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT5)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
+ phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
+ phy_reserved |= PHY_VITESSE_INIT3;
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT6)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT7)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
+ phy_reserved &= ~PHY_VITESSE_INIT_MSK2;
+ phy_reserved |= PHY_VITESSE_INIT8;
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT9)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT10)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
/* some phys clear out pause advertisment on reset, set it back */
mii_rw(dev, np->phyaddr, MII_ADVERTISE, reg);
_
Patches currently in -mm which might be from aabdulla@xxxxxxxxxx are
forcedeth-add-vitesse-phy.patch
forcedeth-fix-power-management-support.patch
forcedeth-fix-cpu-irq-mask.patch
forcedeth-version-bump.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
