The patch titled
use mutex instead of semaphore in CAPI 2.0 interface
has been removed from the -mm tree. Its filename was
use-mutex-instead-of-semaphore-in-capi-20-interface.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: use mutex instead of semaphore in CAPI 2.0 interface
From: Matthias Kaehlcke <matthias.kaehlcke@xxxxxxxxx>
The CAPI 2.0 interface uses a semaphore as mutex. Use the mutex API instead
of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@xxxxxxxxx>
Cc: Karsten Keil <kkeil@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/isdn/capi/capi.c | 33 +++++++++++++++++----------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff -puN drivers/isdn/capi/capi.c~use-mutex-instead-of-semaphore-in-capi-20-interface drivers/isdn/capi/capi.c
--- a/drivers/isdn/capi/capi.c~use-mutex-instead-of-semaphore-in-capi-20-interface
+++ a/drivers/isdn/capi/capi.c
@@ -18,6 +18,7 @@
#include <linux/fcntl.h>
#include <linux/fs.h>
#include <linux/signal.h>
+#include <linux/mutex.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/wait.h>
@@ -146,7 +147,7 @@ struct capidev {
struct capincci *nccis;
- struct semaphore ncci_list_sem;
+ struct mutex ncci_list_mtx;
};
/* -------- global variables ---------------------------------------- */
@@ -394,7 +395,7 @@ static struct capidev *capidev_alloc(voi
if (!cdev)
return NULL;
- init_MUTEX(&cdev->ncci_list_sem);
+ mutex_init(&cdev->ncci_list_mtx);
skb_queue_head_init(&cdev->recvqueue);
init_waitqueue_head(&cdev->recvwait);
write_lock_irqsave(&capidev_list_lock, flags);
@@ -413,9 +414,9 @@ static void capidev_free(struct capidev
}
skb_queue_purge(&cdev->recvqueue);
- down(&cdev->ncci_list_sem);
+ mutex_lock(&cdev->ncci_list_mtx);
capincci_free(cdev, 0xffffffff);
- up(&cdev->ncci_list_sem);
+ mutex_unlock(&cdev->ncci_list_mtx);
write_lock_irqsave(&capidev_list_lock, flags);
list_del(&cdev->list);
@@ -602,15 +603,15 @@ static void capi_recv_message(struct cap
if (CAPIMSG_CMD(skb->data) == CAPI_CONNECT_B3_CONF) {
u16 info = CAPIMSG_U16(skb->data, 12); // Info field
if (info == 0) {
- down(&cdev->ncci_list_sem);
+ mutex_lock(&cdev->ncci_list_mtx);
capincci_alloc(cdev, CAPIMSG_NCCI(skb->data));
- up(&cdev->ncci_list_sem);
+ mutex_unlock(&cdev->ncci_list_mtx);
}
}
if (CAPIMSG_CMD(skb->data) == CAPI_CONNECT_B3_IND) {
- down(&cdev->ncci_list_sem);
+ mutex_lock(&cdev->ncci_list_mtx);
capincci_alloc(cdev, CAPIMSG_NCCI(skb->data));
- up(&cdev->ncci_list_sem);
+ mutex_unlock(&cdev->ncci_list_mtx);
}
spin_lock_irqsave(&workaround_lock, flags);
if (CAPIMSG_COMMAND(skb->data) != CAPI_DATA_B3) {
@@ -751,9 +752,9 @@ capi_write(struct file *file, const char
CAPIMSG_SETAPPID(skb->data, cdev->ap.applid);
if (CAPIMSG_CMD(skb->data) == CAPI_DISCONNECT_B3_RESP) {
- down(&cdev->ncci_list_sem);
+ mutex_lock(&cdev->ncci_list_mtx);
capincci_free(cdev, CAPIMSG_NCCI(skb->data));
- up(&cdev->ncci_list_sem);
+ mutex_unlock(&cdev->ncci_list_mtx);
}
cdev->errcode = capi20_put_message(&cdev->ap, skb);
@@ -938,9 +939,9 @@ capi_ioctl(struct inode *inode, struct f
if (copy_from_user(&ncci, argp, sizeof(ncci)))
return -EFAULT;
- down(&cdev->ncci_list_sem);
+ mutex_lock(&cdev->ncci_list_mtx);
if ((nccip = capincci_find(cdev, (u32) ncci)) == 0) {
- up(&cdev->ncci_list_sem);
+ mutex_unlock(&cdev->ncci_list_mtx);
return 0;
}
#ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
@@ -948,7 +949,7 @@ capi_ioctl(struct inode *inode, struct f
count += atomic_read(&mp->ttyopencount);
}
#endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- up(&cdev->ncci_list_sem);
+ mutex_unlock(&cdev->ncci_list_mtx);
return count;
}
return 0;
@@ -963,14 +964,14 @@ capi_ioctl(struct inode *inode, struct f
if (copy_from_user(&ncci, argp,
sizeof(ncci)))
return -EFAULT;
- down(&cdev->ncci_list_sem);
+ mutex_lock(&cdev->ncci_list_mtx);
nccip = capincci_find(cdev, (u32) ncci);
if (!nccip || (mp = nccip->minorp) == 0) {
- up(&cdev->ncci_list_sem);
+ mutex_unlock(&cdev->ncci_list_mtx);
return -ESRCH;
}
unit = mp->minor;
- up(&cdev->ncci_list_sem);
+ mutex_unlock(&cdev->ncci_list_mtx);
return unit;
}
return 0;
_
Patches currently in -mm which might be from matthias.kaehlcke@xxxxxxxxx are
origin.patch
kcopyd-use-mutex-instead-of-semaphore.patch
power-management-use-mutexes-instead-of-semaphores.patch
sysdev-use-mutex-instead-of-semaphore.patch
git-dvb.patch
scx200-use-mutex-instead-of-semaphore.patch
use-mutex-instead-of-binary-semaphore-in-idt77252-driver.patch
git-scsi-misc.patch
use-mutex-instead-of-binary-semaphore-in-cdu-31a-driver.patch
use-mutex-instead-of-semaphore-in-sbpcd-driver.patch
use-mutex-instead-of-semaphore-in-berkshire-usb-pc-watchdog-driver.patch
git-watchdog.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
