The patch titled
ne: MIPS: Use platform_driver for ne on RBTX49XX
has been removed from the -mm tree. Its filename was
ne-mips-use-platform_driver-for-ne-on-rbtx49xx.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: ne: MIPS: Use platform_driver for ne on RBTX49XX
From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
This patch lets RBTX49XX boards use generic platform_driver interface
for the ne driver.
* Use platform_device to pass ioaddr and irq to the ne driver.
* Remove unnecessary ifdefs for RBTX49XX from the ne driver.
* Make the ne driver selectable on these boards regardless of CONFIG_ISA
Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 19 +++++++++
arch/mips/tx4938/toshiba_rbtx4938/setup.c | 20 ++++++++++
drivers/net/Kconfig | 2 -
drivers/net/ne.c | 8 ----
4 files changed, 40 insertions(+), 9 deletions(-)
diff -puN arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c~ne-mips-use-platform_driver-for-ne-on-rbtx49xx arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c~ne-mips-use-platform_driver-for-ne-on-rbtx49xx
+++ a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -1049,3 +1049,22 @@ static int __init toshiba_rbtx4927_rtc_i
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
device_initcall(toshiba_rbtx4927_rtc_init);
+
+static int __init rbtx4927_ne_init(void)
+{
+ static struct resource __initdata res[] = {
+ {
+ .start = RBTX4927_RTL_8019_BASE,
+ .end = RBTX4927_RTL_8019_BASE + 0x20 - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .start = RBTX4927_RTL_8019_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+ struct platform_device *dev =
+ platform_device_register_simple("ne", -1,
+ res, ARRAY_SIZE(res));
+ return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+device_initcall(rbtx4927_ne_init);
diff -puN arch/mips/tx4938/toshiba_rbtx4938/setup.c~ne-mips-use-platform_driver-for-ne-on-rbtx49xx arch/mips/tx4938/toshiba_rbtx4938/setup.c
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c~ne-mips-use-platform_driver-for-ne-on-rbtx49xx
+++ a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -20,6 +20,7 @@
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/pm.h>
+#include <linux/platform_device.h>
#include <asm/wbflush.h>
#include <asm/reboot.h>
@@ -1037,3 +1038,22 @@ static int __init tx4938_spi_proc_setup(
__initcall(tx4938_spi_proc_setup);
#endif
+
+static int __init rbtx4938_ne_init(void)
+{
+ struct resource res[] = {
+ {
+ .start = RBTX4938_RTL_8019_BASE,
+ .end = RBTX4938_RTL_8019_BASE + 0x20 - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .start = RBTX4938_RTL_8019_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+ struct platform_device *dev =
+ platform_device_register_simple("ne", -1,
+ res, ARRAY_SIZE(res));
+ return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+device_initcall(rbtx4938_ne_init);
diff -puN drivers/net/Kconfig~ne-mips-use-platform_driver-for-ne-on-rbtx49xx drivers/net/Kconfig
--- a/drivers/net/Kconfig~ne-mips-use-platform_driver-for-ne-on-rbtx49xx
+++ a/drivers/net/Kconfig
@@ -1148,7 +1148,7 @@ config ETH16I
config NE2000
tristate "NE2000/NE1000 support"
- depends on NET_ISA || (Q40 && m) || M32R
+ depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
diff -puN drivers/net/ne.c~ne-mips-use-platform_driver-for-ne-on-rbtx49xx drivers/net/ne.c
--- a/drivers/net/ne.c~ne-mips-use-platform_driver-for-ne-on-rbtx49xx
+++ a/drivers/net/ne.c
@@ -56,10 +56,6 @@ static const char version2[] =
#include <asm/system.h>
#include <asm/io.h>
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
-#include <asm/tx4938/rbtx4938.h>
-#endif
-
#include "8390.h"
#define DRV_NAME "ne"
@@ -232,10 +228,6 @@ struct net_device * __init ne_probe(int
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
-#ifdef CONFIG_TOSHIBA_RBTX4938
- dev->base_addr = RBTX4938_RTL_8019_BASE;
- dev->irq = RBTX4938_RTL_8019_IRQ;
-#endif
err = do_ne_probe(dev);
if (err)
goto out;
_
Patches currently in -mm which might be from anemo@xxxxxxxxxxxxx are
origin.patch
git-mips.patch
mips-make-resources-for-ds1742-static-__initdata.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
