The patch titled
revert "[SCSI] fusion - move SPI API over to mptspi.c"
has been added to the -mm tree. Its filename is
revert-fusion-move-spi-api-over-to-mptspic.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: revert "[SCSI] fusion - move SPI API over to mptspi.c"
From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/message/fusion/mptscsih.c | 284 ++++++++++++++++++++++++++++
drivers/message/fusion/mptspi.c | 268 --------------------------
2 files changed, 285 insertions(+), 267 deletions(-)
diff -puN drivers/message/fusion/mptscsih.c~revert-fusion-move-spi-api-over-to-mptspic drivers/message/fusion/mptscsih.c
--- a/drivers/message/fusion/mptscsih.c~revert-fusion-move-spi-api-over-to-mptspic
+++ a/drivers/message/fusion/mptscsih.c
@@ -98,6 +98,9 @@ static int mptscsih_IssueTaskMgmt(MPT_SC
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
+static void mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, struct scsi_device *sdev);
+static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *vtarget, struct scsi_device *sdev);
+static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int channel, int id);
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
@@ -2410,6 +2413,7 @@ mptscsih_slave_configure(struct scsi_dev
}
vdevice->configured_lun = 1;
+ mptscsih_initTarget(hd, vtarget, sdev);
mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
dsprintk((MYIOC_s_INFO_FMT
@@ -2673,6 +2677,286 @@ mptscsih_event_process(MPT_ADAPTER *ioc,
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
+ * mptscsih_initTarget - Target, LUN alloc/free functionality.
+ * @hd: Pointer to MPT_SCSI_HOST structure
+ * @vtarget: per target private data
+ * @sdev: SCSI device
+ *
+ * NOTE: It's only SAFE to call this routine if data points to
+ * sane & valid STANDARD INQUIRY data!
+ *
+ * Allocate and initialize memory for this target.
+ * Save inquiry data.
+ *
+ */
+static void
+mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget,
+ struct scsi_device *sdev)
+{
+ dinitprintk((MYIOC_s_INFO_FMT "initTarget channel=%d id=%d lun=%d hd=%p\n",
+ hd->ioc->name, vtarget->channel, vtarget->id,
+ sdev->lun, hd));
+
+ /* Is LUN supported? If so, upper 2 bits will be 0
+ * in first byte of inquiry data.
+ */
+ if (sdev->inq_periph_qual != 0)
+ return;
+
+ if (vtarget == NULL)
+ return;
+
+ vtarget->type = sdev->type;
+
+ if (hd->ioc->bus_type != SPI)
+ return;
+
+ if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
+ /* Treat all Processors as SAF-TE if
+ * command line option is set */
+ vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
+ mptscsih_writeIOCPage4(hd, vtarget->channel, vtarget->id);
+ }else if ((sdev->type == TYPE_PROCESSOR) &&
+ !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
+ if (sdev->inquiry_len > 49 ) {
+ if (sdev->inquiry[44] == 'S' &&
+ sdev->inquiry[45] == 'A' &&
+ sdev->inquiry[46] == 'F' &&
+ sdev->inquiry[47] == '-' &&
+ sdev->inquiry[48] == 'T' &&
+ sdev->inquiry[49] == 'E' ) {
+ vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
+ mptscsih_writeIOCPage4(hd, vtarget->channel, vtarget->id);
+ }
+ }
+ }
+ mptscsih_setTargetNegoParms(hd, vtarget, sdev);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Update the target negotiation parameters based on the
+ * the Inquiry data, adapter capabilities, and NVRAM settings.
+ *
+ */
+static void
+mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
+ struct scsi_device *sdev)
+{
+ SpiCfgData *pspi_data = &hd->ioc->spi_data;
+ int id = (int) target->id;
+ int nvram;
+ u8 width = MPT_NARROW;
+ u8 factor = MPT_ASYNC;
+ u8 offset = 0;
+ u8 nfactor;
+ u8 noQas = 1;
+
+ target->negoFlags = pspi_data->noQas;
+
+ /* noQas == 0 => device supports QAS. */
+
+ if (sdev->scsi_level < SCSI_2) {
+ width = 0;
+ factor = MPT_ULTRA2;
+ offset = pspi_data->maxSyncOffset;
+ target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
+ } else {
+ if (scsi_device_wide(sdev)) {
+ width = 1;
+ }
+
+ if (scsi_device_sync(sdev)) {
+ factor = pspi_data->minSyncFactor;
+ if (!scsi_device_dt(sdev))
+ factor = MPT_ULTRA2;
+ else {
+ if (!scsi_device_ius(sdev) &&
+ !scsi_device_qas(sdev))
+ factor = MPT_ULTRA160;
+ else {
+ factor = MPT_ULTRA320;
+ if (scsi_device_qas(sdev)) {
+ ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id));
+ noQas = 0;
+ }
+ if (sdev->type == TYPE_TAPE &&
+ scsi_device_ius(sdev))
+ target->negoFlags |= MPT_TAPE_NEGO_IDP;
+ }
+ }
+ offset = pspi_data->maxSyncOffset;
+
+ /* If RAID, never disable QAS
+ * else if non RAID, do not disable
+ * QAS if bit 1 is set
+ * bit 1 QAS support, non-raid only
+ * bit 0 IU support
+ */
+ if (target->raidVolume == 1) {
+ noQas = 0;
+ }
+ } else {
+ factor = MPT_ASYNC;
+ offset = 0;
+ }
+ }
+
+ if (!sdev->tagged_supported) {
+ target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
+ }
+
+ /* Update tflags based on NVRAM settings. (SCSI only)
+ */
+ if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
+ nvram = pspi_data->nvram[id];
+ nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
+
+ if (width)
+ width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
+
+ if (offset > 0) {
+ /* Ensure factor is set to the
+ * maximum of: adapter, nvram, inquiry
+ */
+ if (nfactor) {
+ if (nfactor < pspi_data->minSyncFactor )
+ nfactor = pspi_data->minSyncFactor;
+
+ factor = max(factor, nfactor);
+ if (factor == MPT_ASYNC)
+ offset = 0;
+ } else {
+ offset = 0;
+ factor = MPT_ASYNC;
+ }
+ } else {
+ factor = MPT_ASYNC;
+ }
+ }
+
+ /* Make sure data is consistent
+ */
+ if ((!width) && (factor < MPT_ULTRA2)) {
+ factor = MPT_ULTRA2;
+ }
+
+ /* Save the data to the target structure.
+ */
+ target->minSyncFactor = factor;
+ target->maxOffset = offset;
+ target->maxWidth = width;
+
+ target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO;
+
+ /* Disable unused features.
+ */
+ if (!width)
+ target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
+
+ if (!offset)
+ target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
+
+ if ( factor > MPT_ULTRA320 )
+ noQas = 0;
+
+ if (noQas && (pspi_data->noQas == 0)) {
+ pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
+ target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
+
+ /* Disable QAS in a mixed configuration case
+ */
+
+ ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id));
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * SCSI Config Page functionality ...
+ */
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* mptscsih_writeIOCPage4 - write IOC Page 4
+ * @hd: Pointer to a SCSI Host Structure
+ * @channel: write IOC Page4 for this Bus
+ * @id: write IOC Page4 for this ID
+ *
+ * Return: -EAGAIN if unable to obtain a Message Frame
+ * or 0 if success.
+ *
+ * Remark: We do not wait for a return, write pages sequentially.
+ */
+static int
+mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int channel, int id)
+{
+ MPT_ADAPTER *ioc = hd->ioc;
+ Config_t *pReq;
+ IOCPage4_t *IOCPage4Ptr;
+ MPT_FRAME_HDR *mf;
+ dma_addr_t dataDma;
+ u16 req_idx;
+ u32 frameOffset;
+ u32 flagsLength;
+ int ii;
+
+ /* Get a MF for this command.
+ */
+ if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
+ dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
+ ioc->name));
+ return -EAGAIN;
+ }
+
+ /* Set the request and the data pointers.
+ * Place data at end of MF.
+ */
+ pReq = (Config_t *)mf;
+
+ req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
+ frameOffset = ioc->req_sz - sizeof(IOCPage4_t);
+
+ /* Complete the request frame (same for all requests).
+ */
+ pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ pReq->Reserved = 0;
+ pReq->ChainOffset = 0;
+ pReq->Function = MPI_FUNCTION_CONFIG;
+ pReq->ExtPageLength = 0;
+ pReq->ExtPageType = 0;
+ pReq->MsgFlags = 0;
+ for (ii=0; ii < 8; ii++) {
+ pReq->Reserved2[ii] = 0;
+ }
+
+ IOCPage4Ptr = ioc->spi_data.pIocPg4;
+ dataDma = ioc->spi_data.IocPg4_dma;
+ ii = IOCPage4Ptr->ActiveSEP++;
+ IOCPage4Ptr->SEP[ii].SEPTargetID = id;
+ IOCPage4Ptr->SEP[ii].SEPBus = channel;
+ pReq->Header = IOCPage4Ptr->Header;
+ pReq->PageAddress = cpu_to_le32(id | (channel << 8 ));
+
+ /* Add a SGE to the config request.
+ */
+ flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
+ (IOCPage4Ptr->Header.PageLength + ii) * 4;
+
+ mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
+
+ dinitprintk((MYIOC_s_INFO_FMT
+ "writeIOCPage4: MaxSEP=%d ActiveSEP=%d channel=%d id=%d \n",
+ ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, channel, id));
+
+ mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
+
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
* Bus Scan and Domain Validation functionality ...
*/
diff -puN drivers/message/fusion/mptspi.c~revert-fusion-move-spi-api-over-to-mptspic drivers/message/fusion/mptspi.c
--- a/drivers/message/fusion/mptspi.c~revert-fusion-move-spi-api-over-to-mptspic
+++ a/drivers/message/fusion/mptspi.c
@@ -95,269 +95,6 @@ static int mptspiDoneCtx = -1;
static int mptspiTaskCtx = -1;
static int mptspiInternalCtx = -1; /* Used only for internal commands */
-/**
- * mptspi_setTargetNegoParms - Update the target negotiation
- * parameters based on the the Inquiry data, adapter capabilities,
- * and NVRAM settings
- *
- * @hd: Pointer to a SCSI Host Structure
- * @vtarget: per target private data
- * @sdev: SCSI device
- *
- **/
-static void
-mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
- struct scsi_device *sdev)
-{
- SpiCfgData *pspi_data = &hd->ioc->spi_data;
- int id = (int) target->id;
- int nvram;
- u8 width = MPT_NARROW;
- u8 factor = MPT_ASYNC;
- u8 offset = 0;
- u8 nfactor;
- u8 noQas = 1;
-
- target->negoFlags = pspi_data->noQas;
-
- if (sdev->scsi_level < SCSI_2) {
- width = 0;
- factor = MPT_ULTRA2;
- offset = pspi_data->maxSyncOffset;
- target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
- } else {
- if (scsi_device_wide(sdev))
- width = 1;
-
- if (scsi_device_sync(sdev)) {
- factor = pspi_data->minSyncFactor;
- if (!scsi_device_dt(sdev))
- factor = MPT_ULTRA2;
- else {
- if (!scsi_device_ius(sdev) &&
- !scsi_device_qas(sdev))
- factor = MPT_ULTRA160;
- else {
- factor = MPT_ULTRA320;
- if (scsi_device_qas(sdev)) {
- ddvprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id));
- noQas = 0;
- }
- if (sdev->type == TYPE_TAPE &&
- scsi_device_ius(sdev))
- target->negoFlags |= MPT_TAPE_NEGO_IDP;
- }
- }
- offset = pspi_data->maxSyncOffset;
-
- /* If RAID, never disable QAS
- * else if non RAID, do not disable
- * QAS if bit 1 is set
- * bit 1 QAS support, non-raid only
- * bit 0 IU support
- */
- if (target->raidVolume == 1)
- noQas = 0;
- } else {
- factor = MPT_ASYNC;
- offset = 0;
- }
- }
-
- if (!sdev->tagged_supported)
- target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
-
- /* Update tflags based on NVRAM settings. (SCSI only)
- */
- if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- nvram = pspi_data->nvram[id];
- nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
-
- if (width)
- width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
-
- if (offset > 0) {
- /* Ensure factor is set to the
- * maximum of: adapter, nvram, inquiry
- */
- if (nfactor) {
- if (nfactor < pspi_data->minSyncFactor )
- nfactor = pspi_data->minSyncFactor;
-
- factor = max(factor, nfactor);
- if (factor == MPT_ASYNC)
- offset = 0;
- } else {
- offset = 0;
- factor = MPT_ASYNC;
- }
- } else {
- factor = MPT_ASYNC;
- }
- }
-
- /* Make sure data is consistent
- */
- if ((!width) && (factor < MPT_ULTRA2))
- factor = MPT_ULTRA2;
-
- /* Save the data to the target structure.
- */
- target->minSyncFactor = factor;
- target->maxOffset = offset;
- target->maxWidth = width;
-
- target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO;
-
- /* Disable unused features.
- */
- if (!width)
- target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
-
- if (!offset)
- target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
-
- if ( factor > MPT_ULTRA320 )
- noQas = 0;
-
- if (noQas && (pspi_data->noQas == 0)) {
- pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
- target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
-
- /* Disable QAS in a mixed configuration case
- */
-
- ddvprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id));
- }
-}
-
-/**
- * mptspi_writeIOCPage4 - write IOC Page 4
- * @hd: Pointer to a SCSI Host Structure
- * @channel:
- * @id: write IOC Page4 for this ID & Bus
- *
- * Return: -EAGAIN if unable to obtain a Message Frame
- * or 0 if success.
- *
- * Remark: We do not wait for a return, write pages sequentially.
- **/
-static int
-mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- Config_t *pReq;
- IOCPage4_t *IOCPage4Ptr;
- MPT_FRAME_HDR *mf;
- dma_addr_t dataDma;
- u16 req_idx;
- u32 frameOffset;
- u32 flagsLength;
- int ii;
-
- /* Get a MF for this command.
- */
- if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
- dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
- ioc->name));
- return -EAGAIN;
- }
-
- /* Set the request and the data pointers.
- * Place data at end of MF.
- */
- pReq = (Config_t *)mf;
-
- req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- frameOffset = ioc->req_sz - sizeof(IOCPage4_t);
-
- /* Complete the request frame (same for all requests).
- */
- pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- pReq->Reserved = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_CONFIG;
- pReq->ExtPageLength = 0;
- pReq->ExtPageType = 0;
- pReq->MsgFlags = 0;
- for (ii=0; ii < 8; ii++) {
- pReq->Reserved2[ii] = 0;
- }
-
- IOCPage4Ptr = ioc->spi_data.pIocPg4;
- dataDma = ioc->spi_data.IocPg4_dma;
- ii = IOCPage4Ptr->ActiveSEP++;
- IOCPage4Ptr->SEP[ii].SEPTargetID = id;
- IOCPage4Ptr->SEP[ii].SEPBus = channel;
- pReq->Header = IOCPage4Ptr->Header;
- pReq->PageAddress = cpu_to_le32(id | (channel << 8 ));
-
- /* Add a SGE to the config request.
- */
- flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
- (IOCPage4Ptr->Header.PageLength + ii) * 4;
-
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
-
- ddvprintk((MYIOC_s_INFO_FMT
- "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
- ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel));
-
- mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
-
- return 0;
-}
-
-/**
- * mptspi_initTarget - Target, LUN alloc/free functionality.
- * @hd: Pointer to MPT_SCSI_HOST structure
- * @vtarget: per target private data
- * @sdev: SCSI device
- *
- * NOTE: It's only SAFE to call this routine if data points to
- * sane & valid STANDARD INQUIRY data!
- *
- * Allocate and initialize memory for this target.
- * Save inquiry data.
- *
- **/
-static void
-mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget,
- struct scsi_device *sdev)
-{
-
- /* Is LUN supported? If so, upper 2 bits will be 0
- * in first byte of inquiry data.
- */
- if (sdev->inq_periph_qual != 0)
- return;
-
- if (vtarget == NULL)
- return;
-
- vtarget->type = sdev->type;
-
- if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
- /* Treat all Processors as SAF-TE if
- * command line option is set */
- vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
- mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
- }else if ((sdev->type == TYPE_PROCESSOR) &&
- !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
- if (sdev->inquiry_len > 49 ) {
- if (sdev->inquiry[44] == 'S' &&
- sdev->inquiry[45] == 'A' &&
- sdev->inquiry[46] == 'F' &&
- sdev->inquiry[47] == '-' &&
- sdev->inquiry[48] == 'T' &&
- sdev->inquiry[49] == 'E' ) {
- vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
- mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
- }
- }
- }
- mptspi_setTargetNegoParms(hd, vtarget, sdev);
-}
/**
* mptspi_is_raid - Determines whether target is belonging to volume
@@ -723,16 +460,13 @@ static int mptspi_slave_alloc(struct scs
static int mptspi_slave_configure(struct scsi_device *sdev)
{
+ int ret = mptscsih_slave_configure(sdev);
struct _MPT_SCSI_HOST *hd =
(struct _MPT_SCSI_HOST *)sdev->host->hostdata;
- VirtTarget *vtarget = scsi_target(sdev)->hostdata;
- int ret = mptscsih_slave_configure(sdev);
if (ret)
return ret;
- mptspi_initTarget(hd, vtarget, sdev);
-
ddvprintk((MYIOC_s_INFO_FMT "id=%d min_period=0x%02x"
" max_offset=0x%02x max_width=%d\n", hd->ioc->name,
sdev->id, spi_min_period(scsi_target(sdev)),
_
Patches currently in -mm which might be from akpm@xxxxxxxxxxxxxxxxxxxx are
origin.patch
slab-introduce-krealloc.patch
rm9000-serial-driver.patch
add-apply_to_page_range-which-applies-a-function-to-a-pte-range.patch
smaps-add-clear_refs-file-to-clear-reference.patch
slab-mark-set_up_list3s-__init.patch
slub-core.patch
mm-optimize-kill_bdev.patch
get_unmapped_area-handles-map_fixed-in-hugetlbfs-fix.patch
srmcons-fix-kmallocgfp_kernel-inside-spinlock.patch
uml-driver-formatting-fixes-fix.patch
cx88-video-build-fix.patch
git-acpi.patch
git-alsa.patch
git-agpgart.patch
working-3d-dri-intel-agpko-resume-for-i815-chip-tidy.patch
git-arm.patch
git-avr32.patch
fix-gregkh-driver-sysfs-fix-error-handling-in-binattr-write.patch
revert-gregkh-driver-remove-struct-subsystem-as-it-is-no-longer-needed.patch
git-drm.patch
cinergyt2-fix-file-release-handler.patch
git-gfs2-nmw.patch
git-hid-fixup.patch
git-ieee1394.patch
sbp2-include-fixes.patch
ieee1394-iso-needs-schedh.patch
git-input.patch
git-jfs.patch
git-kbuild.patch
git-kvm.patch
git-mmc.patch
git-mtd.patch
natsemi-allow-users-to-disable-workaround-for-dspcfg-reset-fix.patch
git-e1000.patch
git-e1000-fixup-2.patch
input-rfkill-add-support-for-input-key-to-control-wireless-radio.patch
git-nfs.patch
git-ocfs2.patch
git-parisc.patch
fix-gregkh-pci-pci-remove-the-broken-pci_multithread_probe-option.patch
git-pciseg.patch
git-sh-fixup.patch
git-scsi-misc.patch
scsi-fix-config_scsi_wait_scan=m.patch
git-block-fixup.patch
git-unionfs.patch
auerswald-fix-file-release-handler.patch
git-wireless.patch
fix-x86_64-mm-mtrr-save-the-mtrrs-of-the-bsp-before-booting-an-ap.patch
i386-map-enough-initial-memory-to-create-lowmem-mappings-fix.patch
i386-add-support-for-picopower-irq-router-fix.patch
xfs-clean-up-shrinker-games.patch
lazy-freeing-of-memory-through-madv_free.patch
add-__gfp_movable-for-callers-to-flag-allocations-from-high-memory-that-may-be-migrated.patch
bias-the-location-of-pages-freed-for-min_free_kbytes-in-the-same-max_order_nr_pages-blocks.patch
mm-merge-populate-and-nopage-into-fault-fixes-nonlinear.patch
mm-merge-nopfn-into-fault.patch
maps2-move-the-page-walker-code-to-lib.patch
maps2-add-proc-pid-pagemap-interface.patch
mm-move-common-segment-checks-to-separate-helper-function-v7.patch
cache-pipe-buf-page-address-for-non-highmem-arch.patch
reduce-size-of-task_struct-on-64-bit-machines.patch
mm-shrink-parent-dentries-when-shrinking-slab.patch
merge-sys_clone-sys_unshare-nsproxy-and-namespace.patch
virtual_eisa_root_init-should-be-__init.patch
proc-maps-protection.patch
fix-cycladesh-for-x86_64-and-probably-others.patch
rtc-add-rtc-rs5c313-driver.patch
enlarge-console-name.patch
move-die-notifier-handling-to-common-code.patch
fix-sscanf-%n-match-at-end-of-input-string.patch
parport-dev-driver-model-support.patch
add-support-for-deferrable-timers-respun.patch
linux-sysdevh-needs-to-include-linux-moduleh.patch
time-smp-friendly-alignment-of-struct-clocksource.patch
move-timekeeping-code-to-timekeepingc.patch
fix-kevents-childs-priority-greediness.patch
display-all-possible-partitions-when-the-root-filesystem-failed-to-mount.patch
enhance-initcall_debug-measure-latency.patch
dtlk-fix-error-checks-in-module_init.patch
document-spin_lock_unlocked-rw_lock_unlocked-deprecation.patch
upper-32-bits.patch
driver-for-the-maxim-ds1wm-a-1-wire-bus-master-asic-core.patch
do_tty_write-can-block-even-with-o_nonblock-tidy.patch
define-and-use-new-eventscpu_lock_acquire-and-cpu_lock_release.patch
call-cpu_chain-with-cpu_down_failed-if-cpu_down_prepare-failed-vs-reduce-size-of-task_struct-on-64-bit-machines.patch
kthread-dont-depend-on-work-queues-take-2.patch
fix-kthread_create-vs-freezer-theoretical-race.patch
speedup-divides-by-cpu_power-in-scheduler.patch
utimensat-implementation.patch
revert-rtc-add-rtc_merge_alarm.patch
declare-struct-ktime.patch
make-futex_wait-use-an-hrtimer-for-timeout.patch
kprobes-the-on-off-knob-thru-debugfs-updated.patch
atomich-add-atomic64-cmpxchg-xchg-and-add_unless-to-powerpc.patch
local_t-powerpc-extension.patch
linux-kernel-markers-i386-optimization.patch
signal-timer-event-fds-v9-signalfd-core.patch
signal-timer-event-fds-v9-timerfd-core.patch
signal-timer-event-fds-v9-eventfd-core.patch
revoke-core-code-fix-shared-mapping-revoke.patch
revoke-wire-up-i386-system-calls.patch
x86-serial-convert-legacy-com-ports-to-platform-devices.patch
lguest-vs-x86_64-mm-use-per-cpu-variables-for-gdt-pda.patch
lguest-the-host-code-vs-x86_64-mm-i386-separate-hardware-defined-tss-from-linux-additions.patch
lguest-the-host-code-vs-futex-new-private-futexes.patch
fs-convert-core-functions-to-zero_user_page-pass-kmap-type.patch
fs-convert-core-functions-to-zero_user_page-fix-2.patch
ntfs-use-zero_user_page-fix.patch
make-vm-statistics-update-interval-configurable-fix.patch
acpi-keep-tsc-stable-when-lapic_timer_c2_ok-is-set-vs-x86_64-mm-log-reason-why-tsc-was-marked-unstable.patch
rename-thread_info-to-stack-fix.patch
reiser4-slab-allocators-remove-slab_debug_initial-flag.patch
fbdev-hecuba-framebuffer-driver.patch
vt-add-color-support-to-the-underline-and-italic-attributes-fix.patch
sm501fb-printk-warning-fixes.patch
integrity-new-hooks-fix.patch
integrity-evm-as-an-integrity-service-provider-tidy.patch
integrity-evm-as-an-integrity-service-provider-tidy-fix.patch
integrity-evm-as-an-integrity-service-provider-tidy-fix-2.patch
integrity-ima-integrity_measure-support-tidy.patch
integrity-ima-integrity_measure-support-fix.patch
integrity-ima-integrity_measure-support-fix-2.patch
integrity-tpm-internal-kernel-interface-tidy.patch
w1-build-fix.patch
revert-fusion-move-spi-api-over-to-mptspic.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
