The patch titled serial: suppress RTS assertion with disabled CRTSCTS has been removed from the -mm tree. Its filename was serial-suppress-rts-assertion-with-disabled-crtscts.patch This patch was dropped because it was nacked by the maintainer ------------------------------------------------------ Subject: serial: suppress RTS assertion with disabled CRTSCTS From: "Oleksiy Kebkal" <kebkal@xxxxxxxxx> This patch leaves RTS alone when CRTSCTS is not set. Current behaviour doesn't give any possibility to 1. preconfigure port setting, because open operation implies RTS assertion and initial serial port setting may be wrong. 2. realize peculiar serial flow control required by some hardware especially in embedded devices. Signed-off-by: Oleksiy Kebkal <lesha@xxxxxxxxxxxx> Cc: Russell King <rmk@xxxxxxxxxxxxxxxx> Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/serial/serial_core.c | 42 ++++++++++++++++++++++----------- 1 files changed, 28 insertions(+), 14 deletions(-) diff -puN drivers/serial/serial_core.c~serial-suppress-rts-assertion-with-disabled-crtscts drivers/serial/serial_core.c --- a/drivers/serial/serial_core.c~serial-suppress-rts-assertion-with-disabled-crtscts +++ a/drivers/serial/serial_core.c @@ -185,11 +185,15 @@ static int uart_startup(struct uart_stat uart_change_speed(state, NULL); /* - * Setup the RTS and DTR signals once the - * port is open and ready to respond. + * Setup the RTS (in the case of hardware flow control) + * and DTR signals once the port is open and ready to + * respond. */ - if (info->tty->termios->c_cflag & CBAUD) - uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); + if (info->tty->termios->c_cflag & CBAUD) { + uart_set_mctrl(port, TIOCM_DTR); + if (info->flags & UIF_CTS_FLOW) + uart_set_mctrl(port, TIOCM_RTS); + } } if (info->flags & UIF_CTS_FLOW) { @@ -230,10 +234,14 @@ static void uart_shutdown(struct uart_st info->flags &= ~UIF_INITIALIZED; /* - * Turn off DTR and RTS early. + * Turn off DTR and RTS (in the case of hardware flow control) + * early. */ - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) - uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { + uart_clear_mctrl(port, TIOCM_DTR); + if (info->flags & UIF_CTS_FLOW) + uart_clear_mctrl(port, TIOCM_RTS); + } /* * clear delta_msr_wait queue to avoid mem leaks: we may free @@ -1164,14 +1172,16 @@ static void uart_set_termios(struct tty_ uart_change_speed(state, old_termios); /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) - uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR); + if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) { + uart_clear_mctrl(state->port, TIOCM_DTR); + if (state->info->flags & UIF_CTS_FLOW) + uart_clear_mctrl(state->port, TIOCM_RTS); + } /* Handle transition away from B0 status */ if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { unsigned int mask = TIOCM_DTR; - if (!(cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) + if (!test_bit(TTY_THROTTLED, &tty->flags)) mask |= TIOCM_RTS; uart_set_mctrl(state->port, mask); } @@ -1415,10 +1425,14 @@ static void uart_update_termios(struct u uart_change_speed(state, NULL); /* - * And finally enable the RTS and DTR signals. + * And finally enable the RTS (in the of case hardware flow + * control) and DTR signals. */ - if (tty->termios->c_cflag & CBAUD) - uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + if (tty->termios->c_cflag & CBAUD) { + uart_set_mctrl(port, TIOCM_DTR); + if (state->info->flags & UIF_CTS_FLOW) + uart_set_mctrl(port, TIOCM_RTS); + } } } _ Patches currently in -mm which might be from kebkal@xxxxxxxxx are - To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html