The patch titled
pata_hpt37x: Further small fixes
has been removed from the -mm tree. Its filename was
pata_hpt37x-further-small-fixes.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: pata_hpt37x: Further small fixes
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Further HPT37x changes
- No 66MHz 370/370A
- Remove dead special case check now we use the DPLL (as per the IDE driver)
Pointed out by Sergei
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_hpt37x.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff -puN drivers/ata/pata_hpt37x.c~pata_hpt37x-further-small-fixes drivers/ata/pata_hpt37x.c
--- a/drivers/ata/pata_hpt37x.c~pata_hpt37x-further-small-fixes
+++ a/drivers/ata/pata_hpt37x.c
@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.4"
+#define DRV_VERSION "0.6.5"
struct hpt_clock {
u8 xfer_speed;
@@ -130,7 +130,7 @@ static const struct hpt_chip hpt370 = {
hpt37x_timings_33,
NULL,
NULL,
- hpt37x_timings_66
+ NULL
}
};
@@ -141,7 +141,7 @@ static const struct hpt_chip hpt370a = {
hpt37x_timings_33,
NULL,
hpt37x_timings_50,
- hpt37x_timings_66
+ NULL
}
};
@@ -1019,8 +1019,8 @@ static int hpt37x_init_one(struct pci_de
return -ENODEV;
port = &info_hpt372;
chip_table = &hpt371;
- /* Single channel device, paster is not present
- but the NIOS (or us for non x86) must mark it
+ /* Single channel device, master is not present
+ but the BIOS (or us for non x86) must mark it
absent */
pci_read_config_byte(dev, 0x50, &mcr1);
mcr1 &= ~0x04;
@@ -1132,16 +1132,11 @@ static int hpt37x_init_one(struct pci_de
} else {
port->private_data = (void *)chip_table->clocks[clock_slot];
/*
- * Perform a final fixup. The 371 and 372 clock determines
- * if UDMA133 is available. (FIXME: should we use DPLL then ?)
- */
+ * Perform a final fixup. Note that we will have used the
+ * DPLL on the HPT372 which means we don't have to worry
+ * about lack of UDMA133 support on lower clocks
+ */
- if (clock_slot == 2 && chip_table == &hpt372) { /* 50Mhz */
- printk(KERN_WARNING "pata_hpt37x: No UDMA133 support available with 50MHz bus clock.\n");
- if (port == &info_hpt372)
- port = &info_hpt372_50;
- else BUG();
- }
if (clock_slot < 2 && port == &info_hpt370)
port = &info_hpt370_33;
if (clock_slot < 2 && port == &info_hpt370a)
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
origin.patch
git-agpgart.patch
git-dvb.patch
ata_timing-ensure-t-cycle-is-always-correct.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
testing-patch-for-ali-pata-fixes-hopefully-for-the-problems-with-atapi-dma.patch
pata_ali-more-work.patch
sl82c105-switch-to-ref-counting-api.patch
git-r8169.patch
serial-suppress-rts-assertion-with-disabled-crtscts.patch
pci-syscallc-switch-to-refcounting-api.patch
drivers-scsi-ncr5380c-replacing-yield-with-a.patch
drivers-scsi-mca_53c9xc-save_flags-cli-removal.patch
driver_bfin_serial_core.patch
documentation-ask-driver-writers-to-provide-pm-support.patch
tty-clarify-documentation-of-write.patch
tty-i386-x86_64-arbitary-speed-support.patch
fixes-and-cleanups-for-earlyprintk-aka-boot-console.patch
tty-remove-unnecessary-export-of-proc_clear_tty.patch
tty-simplify-calling-of-put_pid.patch
tty-introduce-no_tty-and-use-it-in-selinux.patch
protect-tty-drivers-list-with-tty_mutex.patch
fix-82875-pci-setup.patch
doc-kernel-parameters-use-x86-32-tag-instead-of-ia-32.patch
remove-redundant-check-from-proc_sys_setattr.patch
apm-fix-incorrect-comment.patch
upper-32-bits.patch
console-utf-8-fixes.patch
add-pci_try_set_mwi.patch
edd-switch-to-refcounting-pci-apis.patch
revoke-core-code-revoke-no-revoke-for-nommu.patch
add-irqf_irqpoll-flag-common-code.patch
add-irqf_irqpoll-flag-on-x86_64.patch
add-irqf_irqpoll-flag-on-i386.patch
add-irqf_irqpoll-flag-on-ia64.patch
add-irqf_irqpoll-flag-on-sh.patch
add-irqf_irqpoll-flag-on-arm.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
