The patch titled
spi: fix use of set_cs in spi_s3c24xx driver
has been removed from the -mm tree. Its filename was
spi-fix-use-of-set_cs-in-spi_s3c24xx-driver.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: spi: fix use of set_cs in spi_s3c24xx driver
From: Ben Dooks <ben-linux-arm@xxxxxxxxx>
It turns out that the last patch to change set_cs to be kept in the
controller's structure instead of the platform data was an incomplete
change, and did not change the references to platfrom data in the setup
xfer code. (This can prevent an oops.)
Reported-by: <Ling.Alex@xxxxxxxxxx>
Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx>
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/spi/spi_s3c24xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff -puN drivers/spi/spi_s3c24xx.c~spi-fix-use-of-set_cs-in-spi_s3c24xx-driver drivers/spi/spi_s3c24xx.c
--- a/drivers/spi/spi_s3c24xx.c~spi-fix-use-of-set_cs-in-spi_s3c24xx-driver
+++ a/drivers/spi/spi_s3c24xx.c
@@ -77,7 +77,7 @@ static void s3c24xx_spi_chipsel(struct s
switch (value) {
case BITBANG_CS_INACTIVE:
- hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol^1);
+ hw->set_cs(hw->pdata, spi->chip_select, cspol^1);
break;
case BITBANG_CS_ACTIVE:
@@ -98,7 +98,7 @@ static void s3c24xx_spi_chipsel(struct s
/* write new configration */
writeb(spcon, hw->regs + S3C2410_SPCON);
- hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol);
+ hw->set_cs(hw->pdata, spi->chip_select, cspol);
break;
}
_
Patches currently in -mm which might be from ben-linux-arm@xxxxxxxxx are
origin.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
