The patch titled
pata_pdc2027x: Bring into line with changes, add the mode filters as per Jeff's report
has been removed from the -mm tree. Its filename was
pata_pdc2027x-bring-into-line-with-changes-add-the-mode.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: pata_pdc2027x: Bring into line with changes, add the mode filters as per Jeff's report
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Fix theoretical pdc2027x crash if the BIOS didn't assign BAR4 for DMA.
(Needs a default modefilter)
- Use cable methods
- Replace post_set_mode() use with wrapped set_mode() [Removes last use of
post_set_mode]
- Mode filter Maxtor UDMA133 rule
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_pdc2027x.c | 60 ++++++++++++++++++++++++++--------
1 file changed, 47 insertions(+), 13 deletions(-)
diff -puN drivers/ata/pata_pdc2027x.c~pata_pdc2027x-bring-into-line-with-changes-add-the-mode drivers/ata/pata_pdc2027x.c
--- a/drivers/ata/pata_pdc2027x.c~pata_pdc2027x-bring-into-line-with-changes-add-the-mode
+++ a/drivers/ata/pata_pdc2027x.c
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_pdc2027x"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "0.9"
#undef PDC_DEBUG
#ifdef PDC_DEBUG
@@ -66,8 +66,10 @@ static int pdc2027x_init_one(struct pci_
static void pdc2027x_error_handler(struct ata_port *ap);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
-static void pdc2027x_post_set_mode(struct ata_port *ap);
static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
+static int pdc2027x_cable_detect(struct ata_port *ap);
+static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed);
/*
* ATA Timing Tables based on 133MHz controller clock.
@@ -146,6 +148,7 @@ static struct scsi_host_template pdc2027
static struct ata_port_operations pdc2027x_pata100_ops = {
.port_disable = ata_port_disable,
+ .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -166,6 +169,7 @@ static struct ata_port_operations pdc202
.thaw = ata_bmdma_thaw,
.error_handler = pdc2027x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = pdc2027x_cable_detect,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -179,7 +183,8 @@ static struct ata_port_operations pdc202
.port_disable = ata_port_disable,
.set_piomode = pdc2027x_set_piomode,
.set_dmamode = pdc2027x_set_dmamode,
- .post_set_mode = pdc2027x_post_set_mode,
+ .set_mode = pdc2027x_set_mode,
+ .mode_filter = pdc2027x_mode_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -200,6 +205,7 @@ static struct ata_port_operations pdc202
.thaw = ata_bmdma_thaw,
.error_handler = pdc2027x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = pdc2027x_cable_detect,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -261,7 +267,7 @@ static inline void __iomem *dev_mmio(str
}
/**
- * pdc2027x_pata_cbl_detect - Probe host controller cable detect info
+ * pdc2027x_pata_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
*
* Read 80c cable indicator from Promise extended register.
@@ -270,7 +276,7 @@ static inline void __iomem *dev_mmio(str
* LOCKING:
* None (inherited from caller).
*/
-static void pdc2027x_cbl_detect(struct ata_port *ap)
+static int pdc2027x_cable_detect(struct ata_port *ap)
{
u32 cgcr;
@@ -281,13 +287,10 @@ static void pdc2027x_cbl_detect(struct a
PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no);
- ap->cbl = ATA_CBL_PATA80;
- return;
-
+ return ATA_CBL_PATA80;
cbl40:
printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no);
- ap->cbl = ATA_CBL_PATA40;
- ap->udma_mask &= ATA_UDMA_MASK_40C;
+ return ATA_CBL_PATA40;
}
/**
@@ -315,7 +318,6 @@ static int pdc2027x_prereset(struct ata_
/* Check whether port enabled */
if (!pdc2027x_port_enabled(ap))
return -ENOENT;
- pdc2027x_cbl_detect(ap);
return ata_std_prereset(ap, deadline);
}
@@ -335,6 +337,32 @@ static void pdc2027x_error_handler(struc
}
/**
+ * pdc2720x_mode_filter - mode selection filter
+ * @adev: ATA device
+ * @mask: list of modes proposed
+ *
+ * Block UDMA on devices that cause trouble with this controller.
+ */
+
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+ unsigned char model_num[ATA_ID_PROD_LEN + 1];
+ struct ata_device *pair = ata_dev_pair(adev);
+
+ if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
+ return ata_pci_default_filter(adev, mask);
+
+ /* Check for slave of a Maxtor at UDMA6 */
+ ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
+ ATA_ID_PROD_LEN + 1);
+ /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
+ if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+ mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
+
+ return ata_pci_default_filter(adev, mask);
+}
+
+/**
* pdc2027x_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port to configure
* @adev: um
@@ -445,17 +473,22 @@ static void pdc2027x_set_dmamode(struct
}
/**
- * pdc2027x_post_set_mode - Set the timing registers back to correct values.
+ * pdc2027x_set_mode - Set the timing registers back to correct values.
* @ap: Port to configure
+ * @r_failed: Returned device for failure
*
* The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
* automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
* This function overwrites the possibly incorrect values set by the hardware to be correct.
*/
-static void pdc2027x_post_set_mode(struct ata_port *ap)
+static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed)
{
int i;
+ i = ata_do_set_mode(ap, r_failed);
+ if (i < 0)
+ return i;
+
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
@@ -477,6 +510,7 @@ static void pdc2027x_post_set_mode(struc
}
}
}
+ return 0;
}
/**
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
origin.patch
git-libata-all.patch
pata_hpt37x-further-small-fixes.patch
pata_hpt3x2n-add-hpt371n-support-and-other-bits.patch
drivers-ata-pata_cmd640c-fix-build-with-config_pm=n.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
testing-patch-for-ali-pata-fixes-hopefully-for-the-problems-with-atapi-dma.patch
testing-patch-for-ali-pata-fixes-hopefully-for-the-problems-with-atapi-dma-fix.patch
git-netdev-all.patch
pcmcia-irq-probe-can-be-done-without-risking-an-irq-storm.patch
serial-suppress-rts-assertion-with-disabled-crtscts.patch
drivers-scsi-ncr5380c-replacing-yield-with-a.patch
drivers-scsi-mca_53c9xc-save_flags-cli-removal.patch
driver_bfin_serial_core.patch
driver_bfin_serial_core-update.patch
documentation-ask-driver-writers-to-provide-pm-support.patch
tty-clarify-documentation-of-write.patch
tty-i386-x86_64-arbitary-speed-support.patch
fixes-and-cleanups-for-earlyprintk-aka-boot-console.patch
tty-remove-unnecessary-export-of-proc_clear_tty.patch
tty-simplify-calling-of-put_pid.patch
tty-introduce-no_tty-and-use-it-in-selinux.patch
tty-in-tiocsctty-when-we-steal-a-tty-hang-it-up.patch
protect-tty-drivers-list-with-tty_mutex.patch
fix-82875-pci-setup.patch
doc-kernel-parameters-use-x86-32-tag-instead-of-ia-32.patch
remove-redundant-check-from-proc_sys_setattr.patch
apm-fix-incorrect-comment.patch
edac-new-opteron-athlon64-memory-controller-driver.patch
edac-k8-driver-coding-tidy.patch
revoke-core-code-revoke-no-revoke-for-nommu.patch
add-irqf_irqpoll-flag-common-code.patch
add-irqf_irqpoll-flag-on-x86_64.patch
add-irqf_irqpoll-flag-on-i386.patch
add-irqf_irqpoll-flag-on-ia64.patch
add-irqf_irqpoll-flag-on-sh.patch
add-irqf_irqpoll-flag-on-arm.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
