The patch titled
Use menuconfig objects: W1
has been added to the -mm tree. Its filename is
use-menuconfig-objects-w1.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: Use menuconfig objects: W1
From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.
Signed-off-by: Jan Engelhardt <jengelh@xxxxxx>
Cc: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/w1/Kconfig | 12 ++++++------
drivers/w1/masters/Kconfig | 7 +++----
drivers/w1/slaves/Kconfig | 4 ----
3 files changed, 9 insertions(+), 14 deletions(-)
diff -puN drivers/w1/Kconfig~use-menuconfig-objects-w1 drivers/w1/Kconfig
--- a/drivers/w1/Kconfig~use-menuconfig-objects-w1
+++ a/drivers/w1/Kconfig
@@ -1,7 +1,5 @@
-menu "Dallas's 1-wire bus"
-
-config W1
- tristate "Dallas's 1-wire support"
+menuconfig W1
+ tristate "Dallas's 1-wire bus support"
---help---
Dallas' 1-wire bus is useful to connect slow 1-pin devices
such as iButtons and thermal sensors.
@@ -11,8 +9,10 @@ config W1
This W1 support can also be built as a module. If so, the module
will be called wire.ko.
+if W1
+
config W1_CON
- depends on CONNECTOR && W1
+ depends on CONNECTOR
bool "Userspace communication over connector"
default y
--- help ---
@@ -26,4 +26,4 @@ config W1_CON
source drivers/w1/masters/Kconfig
source drivers/w1/slaves/Kconfig
-endmenu
+endif # W1
diff -puN drivers/w1/masters/Kconfig~use-menuconfig-objects-w1 drivers/w1/masters/Kconfig
--- a/drivers/w1/masters/Kconfig~use-menuconfig-objects-w1
+++ a/drivers/w1/masters/Kconfig
@@ -3,11 +3,10 @@
#
menu "1-wire Bus Masters"
- depends on W1
config W1_MASTER_MATROX
tristate "Matrox G400 transport layer for 1-wire"
- depends on W1 && PCI
+ depends on PCI
help
Say Y here if you want to communicate with your 1-wire devices
using Matrox's G400 GPIO pins.
@@ -17,7 +16,7 @@ config W1_MASTER_MATROX
config W1_MASTER_DS2490
tristate "DS2490 USB <-> W1 transport layer for 1-wire"
- depends on W1 && USB
+ depends on USB
help
Say Y here if you want to have a driver for DS2490 based USB <-> W1 bridges,
for example DS9490*.
@@ -27,7 +26,7 @@ config W1_MASTER_DS2490
config W1_MASTER_DS2482
tristate "Maxim DS2482 I2C to 1-Wire bridge"
- depends on I2C && W1 && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for the Maxim DS2482
I2C to 1-Wire bridge.
diff -puN drivers/w1/slaves/Kconfig~use-menuconfig-objects-w1 drivers/w1/slaves/Kconfig
--- a/drivers/w1/slaves/Kconfig~use-menuconfig-objects-w1
+++ a/drivers/w1/slaves/Kconfig
@@ -3,25 +3,21 @@
#
menu "1-wire Slaves"
- depends on W1
config W1_SLAVE_THERM
tristate "Thermal family implementation"
- depends on W1
help
Say Y here if you want to connect 1-wire thermal sensors to your
wire.
config W1_SLAVE_SMEM
tristate "Simple 64bit memory family implementation"
- depends on W1
help
Say Y here if you want to connect 1-wire
simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
config W1_SLAVE_DS2433
tristate "4kb EEPROM family support (DS2433)"
- depends on W1
help
Say Y here if you want to use a 1-wire
4kb EEPROM family device (DS2433).
_
Patches currently in -mm which might be from jengelh@xxxxxxxxxxxxxxx are
git-kbuild.patch
remove-artificial-software-max_loop-limit.patch
fix-kevents-childs-priority-greediness.patch
vt-allow-for-the-palette-to-be-exposed-and-changed-via-sysfs.patch
vt-add-color-support-to-the-underline-and-italic-attributes.patch
vt-expose-system-wide-utf-8-default-setting-via-sysfs.patch
use-menuconfig-objects-acpi.patch
use-menuconfig-objects-libata.patch
use-menuconfig-objects-block-layer.patch
use-menuconfig-objects-connector.patch
use-menuconfig-objects-crypto.patch
use-menuconfig-objects-crypto-hw.patch
use-menuconfig-objects-dccp.patch
use-menuconfig-objects-i2o.patch
use-menuconfig-objects-ide.patch
use-menuconfig-objects-mtd.patch
use-menuconfig-objects-ipvs.patch
use-menuconfig-objects-sctp.patch
use-menuconfig-objects-tipc.patch
use-menuconfig-objects-arcnet.patch
use-menuconfig-objects-phy.patch
use-menuconfig-objects-toeknring.patch
use-menuconfig-objects-netdev.patch
use-menuconfig-objects-oldcd.patch
use-menuconfig-objects-parport.patch
use-menuconfig-objects-pcihotplug.patch
use-menuconfig-objects-pcmcia.patch
use-menuconfig-objects-pnp.patch
use-menuconfig-objects-w1.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
