The patch titled
Use menuconfig objects: pcihotplug
has been added to the -mm tree. Its filename is
use-menuconfig-objects-pcihotplug.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: Use menuconfig objects: pcihotplug
From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>
Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.
Signed-off-by: Jan Engelhardt <jengelh@xxxxxx>
Cc: Kristen Carlson Accardi <kristen.c.accardi@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/pci/hotplug/Kconfig | 25 ++++++++++---------------
1 files changed, 10 insertions(+), 15 deletions(-)
diff -puN drivers/pci/hotplug/Kconfig~use-menuconfig-objects-pcihotplug drivers/pci/hotplug/Kconfig
--- a/drivers/pci/hotplug/Kconfig~use-menuconfig-objects-pcihotplug
+++ a/drivers/pci/hotplug/Kconfig
@@ -2,9 +2,7 @@
# PCI Hotplug support
#
-menu "PCI Hotplug Support"
-
-config HOTPLUG_PCI
+menuconfig HOTPLUG_PCI
tristate "Support for PCI Hotplug (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL && HOTPLUG
---help---
@@ -17,9 +15,10 @@ config HOTPLUG_PCI
When in doubt, say N.
+if HOTPLUG_PCI
+
config HOTPLUG_PCI_FAKE
tristate "Fake PCI Hotplug driver"
- depends on HOTPLUG_PCI
help
Say Y here if you want to use the fake PCI hotplug driver. It can
be used to simulate PCI hotplug events if even if your system is
@@ -42,7 +41,7 @@ config HOTPLUG_PCI_FAKE
config HOTPLUG_PCI_COMPAQ
tristate "Compaq PCI Hotplug driver"
- depends on HOTPLUG_PCI && X86 && PCI_BIOS
+ depends on X86 && PCI_BIOS
help
Say Y here if you have a motherboard with a Compaq PCI Hotplug
controller.
@@ -64,7 +63,7 @@ config HOTPLUG_PCI_COMPAQ_NVRAM
config HOTPLUG_PCI_IBM
tristate "IBM PCI Hotplug driver"
- depends on HOTPLUG_PCI && X86_IO_APIC && X86 && PCI_BIOS
+ depends on X86_IO_APIC && X86 && PCI_BIOS
help
Say Y here if you have a motherboard with a IBM PCI Hotplug
controller.
@@ -76,7 +75,6 @@ config HOTPLUG_PCI_IBM
config HOTPLUG_PCI_ACPI
tristate "ACPI PCI Hotplug driver"
- depends on HOTPLUG_PCI
depends on (!ACPI_DOCK && ACPI) || (ACPI_DOCK)
help
Say Y here if you have a system that supports PCI Hotplug using
@@ -101,7 +99,6 @@ config HOTPLUG_PCI_ACPI_IBM
config HOTPLUG_PCI_CPCI
bool "CompactPCI Hotplug driver"
- depends on HOTPLUG_PCI
help
Say Y here if you have a CompactPCI system card with CompactPCI
hotswap support per the PICMG 2.1 specification.
@@ -110,7 +107,7 @@ config HOTPLUG_PCI_CPCI
config HOTPLUG_PCI_CPCI_ZT5550
tristate "Ziatech ZT5550 CompactPCI Hotplug driver"
- depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86
+ depends on HOTPLUG_PCI_CPCI && X86
help
Say Y here if you have an Performance Technologies (formerly Intel,
formerly just Ziatech) Ziatech ZT5550 CompactPCI system card.
@@ -122,7 +119,7 @@ config HOTPLUG_PCI_CPCI_ZT5550
config HOTPLUG_PCI_CPCI_GENERIC
tristate "Generic port I/O CompactPCI Hotplug driver"
- depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86
+ depends on HOTPLUG_PCI_CPCI && X86
help
Say Y here if you have a CompactPCI system card that exposes the #ENUM
hotswap signal as a bit in a system register that can be read through
@@ -135,7 +132,6 @@ config HOTPLUG_PCI_CPCI_GENERIC
config HOTPLUG_PCI_SHPC
tristate "SHPC PCI Hotplug driver"
- depends on HOTPLUG_PCI
help
Say Y here if you have a motherboard with a SHPC PCI Hotplug
controller.
@@ -147,7 +143,7 @@ config HOTPLUG_PCI_SHPC
config HOTPLUG_PCI_RPA
tristate "RPA PCI Hotplug driver"
- depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
+ depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
help
Say Y here if you have a RPA system that supports PCI Hotplug.
@@ -170,12 +166,11 @@ config HOTPLUG_PCI_RPA_DLPAR
config HOTPLUG_PCI_SGI
tristate "SGI PCI Hotplug Support"
- depends on HOTPLUG_PCI && (IA64_SGI_SN2 || IA64_GENERIC)
+ depends on IA64_SGI_SN2 || IA64_GENERIC
help
Say Y here if you want to use the SGI Altix Hotplug
Driver for PCI devices.
When in doubt, say N.
-endmenu
-
+endif # HOTPLUG_PCI
_
Patches currently in -mm which might be from jengelh@xxxxxxxxxxxxxxx are
git-kbuild.patch
remove-artificial-software-max_loop-limit.patch
fix-kevents-childs-priority-greediness.patch
vt-allow-for-the-palette-to-be-exposed-and-changed-via-sysfs.patch
vt-add-color-support-to-the-underline-and-italic-attributes.patch
vt-expose-system-wide-utf-8-default-setting-via-sysfs.patch
use-menuconfig-objects-acpi.patch
use-menuconfig-objects-libata.patch
use-menuconfig-objects-block-layer.patch
use-menuconfig-objects-connector.patch
use-menuconfig-objects-crypto.patch
use-menuconfig-objects-crypto-hw.patch
use-menuconfig-objects-dccp.patch
use-menuconfig-objects-i2o.patch
use-menuconfig-objects-ide.patch
use-menuconfig-objects-mtd.patch
use-menuconfig-objects-ipvs.patch
use-menuconfig-objects-sctp.patch
use-menuconfig-objects-tipc.patch
use-menuconfig-objects-arcnet.patch
use-menuconfig-objects-phy.patch
use-menuconfig-objects-toeknring.patch
use-menuconfig-objects-netdev.patch
use-menuconfig-objects-oldcd.patch
use-menuconfig-objects-parport.patch
use-menuconfig-objects-pcihotplug.patch
use-menuconfig-objects-pcmcia.patch
use-menuconfig-objects-pnp.patch
use-menuconfig-objects-w1.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
