+ use-menuconfig-objects-arcnet.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     Use menuconfig objects: ARCNET
has been added to the -mm tree.  Its filename is
     use-menuconfig-objects-arcnet.patch

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

------------------------------------------------------
Subject: Use menuconfig objects: ARCNET
From: Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx>

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@xxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/net/arcnet/Kconfig |   17 ++++-------------
 1 files changed, 4 insertions(+), 13 deletions(-)

diff -puN drivers/net/arcnet/Kconfig~use-menuconfig-objects-arcnet drivers/net/arcnet/Kconfig
--- a/drivers/net/arcnet/Kconfig~use-menuconfig-objects-arcnet
+++ a/drivers/net/arcnet/Kconfig
@@ -2,10 +2,8 @@
 # Arcnet configuration
 #
 
-menu "ARCnet devices"
+menuconfig ARCNET
 	depends on NETDEVICES && (ISA || PCI)
-
-config ARCNET
 	tristate "ARCnet support"
 	---help---
 	  If you have a network card of this type, say Y and check out the
@@ -25,9 +23,10 @@ config ARCNET
 	  <file:Documentation/networking/net-modules.txt>.  The module will
 	  be called arcnet.
 
+if ARCNET
+
 config ARCNET_1201
 	tristate "Enable standard ARCNet packet format (RFC 1201)"
-	depends on ARCNET
 	help
 	  This allows you to use RFC1201 with your ARCnet card via the virtual
 	  arc0 device.  You need to say Y here to communicate with
@@ -38,7 +37,6 @@ config ARCNET_1201
 
 config ARCNET_1051
 	tristate "Enable old ARCNet packet format (RFC 1051)"
-	depends on ARCNET
 	---help---
 	  This allows you to use RFC1051 with your ARCnet card via the virtual
 	  arc0s device. You only need arc0s if you want to talk to ARCnet
@@ -53,7 +51,6 @@ config ARCNET_1051
 
 config ARCNET_RAW
 	tristate "Enable raw mode packet interface"
-	depends on ARCNET
 	help
 	  ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
 	  to work unless talking to a copy of the same Linux arcnet driver,
@@ -61,7 +58,6 @@ config ARCNET_RAW
 
 config ARCNET_CAP
 	tristate "Enable CAP mode packet interface"
-	depends on ARCNET
 	help
 	  ARCnet "cap mode" packet encapsulation. Used to get the hardware
           acknowledge back to userspace. After the initial protocol byte every
@@ -80,7 +76,6 @@ config ARCNET_CAP
 
 config ARCNET_COM90xx
 	tristate "ARCnet COM90xx (normal) chipset driver"
-	depends on ARCNET
 	help
 	  This is the chipset driver for the standard COM90xx cards. If you
 	  have always used the old ARCnet driver without knowing what type of
@@ -92,7 +87,6 @@ config ARCNET_COM90xx
 
 config ARCNET_COM90xxIO
 	tristate "ARCnet COM90xx (IO mapped) chipset driver"
-	depends on ARCNET
 	---help---
 	  This is the chipset driver for the COM90xx cards, using them in
 	  IO-mapped mode instead of memory-mapped mode. This is slower than
@@ -105,7 +99,6 @@ config ARCNET_COM90xxIO
 
 config ARCNET_RIM_I
 	tristate "ARCnet COM90xx (RIM I) chipset driver"
-	depends on ARCNET
 	---help---
 	  This is yet another chipset driver for the COM90xx cards, but this
 	  time only using memory-mapped mode, and no IO ports at all. This
@@ -118,7 +111,6 @@ config ARCNET_RIM_I
 
 config ARCNET_COM20020
 	tristate "ARCnet COM20020 chipset driver"
-	depends on ARCNET
 	help
 	  This is the driver for the new COM20020 chipset. It supports such
 	  things as promiscuous mode, so packet sniffing is possible, and
@@ -136,5 +128,4 @@ config ARCNET_COM20020_PCI
 	tristate "Support for COM20020 on PCI"
 	depends on ARCNET_COM20020 && PCI
 
-endmenu
-
+endif # ARCNET
_

Patches currently in -mm which might be from jengelh@xxxxxxxxxxxxxxx are

git-kbuild.patch
remove-artificial-software-max_loop-limit.patch
fix-kevents-childs-priority-greediness.patch
vt-allow-for-the-palette-to-be-exposed-and-changed-via-sysfs.patch
vt-add-color-support-to-the-underline-and-italic-attributes.patch
vt-expose-system-wide-utf-8-default-setting-via-sysfs.patch
use-menuconfig-objects-acpi.patch
use-menuconfig-objects-libata.patch
use-menuconfig-objects-block-layer.patch
use-menuconfig-objects-connector.patch
use-menuconfig-objects-crypto.patch
use-menuconfig-objects-crypto-hw.patch
use-menuconfig-objects-dccp.patch
use-menuconfig-objects-i2o.patch
use-menuconfig-objects-ide.patch
use-menuconfig-objects-mtd.patch
use-menuconfig-objects-ipvs.patch
use-menuconfig-objects-sctp.patch
use-menuconfig-objects-tipc.patch
use-menuconfig-objects-arcnet.patch
use-menuconfig-objects-phy.patch
use-menuconfig-objects-toeknring.patch
use-menuconfig-objects-netdev.patch
use-menuconfig-objects-oldcd.patch
use-menuconfig-objects-parport.patch
use-menuconfig-objects-pcihotplug.patch
use-menuconfig-objects-pcmcia.patch
use-menuconfig-objects-pnp.patch
use-menuconfig-objects-w1.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux