The patch titled
MTD: delete unused header file linux/mtd/iflash.h.
has been added to the -mm tree. Its filename is
mtd-delete-unused-header-file-linux-mtd-iflashh.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: MTD: delete unused header file linux/mtd/iflash.h.
From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
Delete the unreferenced header file include/linux/mtd/iflash.h.
Signed-off-by: Robert P. J. Day <rpjday@xxxxxxxxxxxxxx>
Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
include/linux/mtd/iflash.h | 98 -----------------------------------
1 file changed, 98 deletions(-)
diff -puN include/linux/mtd/iflash.h~mtd-delete-unused-header-file-linux-mtd-iflashh /dev/null
--- a/include/linux/mtd/iflash.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* $Id: iflash.h,v 1.2 2000/11/13 18:01:54 dwmw2 Exp $ */
-
-#ifndef __MTD_IFLASH_H__
-#define __MTD_IFLASH_H__
-
-/* Extended CIS registers for Series 2 and 2+ cards */
-/* The registers are all offsets from 0x4000 */
-#define CISREG_CSR 0x0100
-#define CISREG_WP 0x0104
-#define CISREG_RDYBSY 0x0140
-
-/* Extended CIS registers for Series 2 cards */
-#define CISREG_SLEEP 0x0118
-#define CISREG_RDY_MASK 0x0120
-#define CISREG_RDY_STATUS 0x0130
-
-/* Extended CIS registers for Series 2+ cards */
-#define CISREG_VCR 0x010c
-
-/* Card Status Register */
-#define CSR_SRESET 0x20 /* Soft reset */
-#define CSR_CMWP 0x10 /* Common memory write protect */
-#define CSR_PWRDOWN 0x08 /* Power down status */
-#define CSR_CISWP 0x04 /* Common memory CIS WP */
-#define CSR_WP 0x02 /* Mechanical write protect */
-#define CSR_READY 0x01 /* Ready/busy status */
-
-/* Write Protection Register */
-#define WP_BLKEN 0x04 /* Enable block locking */
-#define WP_CMWP 0x02 /* Common memory write protect */
-#define WP_CISWP 0x01 /* Common memory CIS WP */
-
-/* Voltage Control Register */
-#define VCR_VCC_LEVEL 0x80 /* 0 = 5V, 1 = 3.3V */
-#define VCR_VPP_VALID 0x02 /* Vpp Valid */
-#define VCR_VPP_GEN 0x01 /* Integrated Vpp generator */
-
-/* Ready/Busy Mode Register */
-#define RDYBSY_RACK 0x02 /* Ready acknowledge */
-#define RDYBSY_MODE 0x01 /* 1 = high performance */
-
-#define LOW(x) ((x) & 0xff)
-
-/* 28F008SA-Compatible Command Set */
-#define IF_READ_ARRAY 0xffff
-#define IF_INTEL_ID 0x9090
-#define IF_READ_CSR 0x7070
-#define IF_CLEAR_CSR 0x5050
-#define IF_WRITE 0x4040
-#define IF_BLOCK_ERASE 0x2020
-#define IF_ERASE_SUSPEND 0xb0b0
-#define IF_CONFIRM 0xd0d0
-
-/* 28F016SA Performance Enhancement Commands */
-#define IF_READ_PAGE 0x7575
-#define IF_PAGE_SWAP 0x7272
-#define IF_SINGLE_LOAD 0x7474
-#define IF_SEQ_LOAD 0xe0e0
-#define IF_PAGE_WRITE 0x0c0c
-#define IF_RDY_MODE 0x9696
-#define IF_RDY_LEVEL 0x0101
-#define IF_RDY_PULSE_WRITE 0x0202
-#define IF_RDY_PULSE_ERASE 0x0303
-#define IF_RDY_DISABLE 0x0404
-#define IF_LOCK_BLOCK 0x7777
-#define IF_UPLOAD_STATUS 0x9797
-#define IF_READ_ESR 0x7171
-#define IF_ERASE_UNLOCKED 0xa7a7
-#define IF_SLEEP 0xf0f0
-#define IF_ABORT 0x8080
-#define IF_UPLOAD_DEVINFO 0x9999
-
-/* Definitions for Compatible Status Register */
-#define CSR_WR_READY 0x8080 /* Write state machine status */
-#define CSR_ERA_SUSPEND 0x4040 /* Erase suspend status */
-#define CSR_ERA_ERR 0x2020 /* Erase status */
-#define CSR_WR_ERR 0x1010 /* Data write status */
-#define CSR_VPP_LOW 0x0808 /* Vpp status */
-
-/* Definitions for Global Status Register */
-#define GSR_WR_READY 0x8080 /* Write state machine status */
-#define GSR_OP_SUSPEND 0x4040 /* Operation suspend status */
-#define GSR_OP_ERR 0x2020 /* Device operation status */
-#define GSR_SLEEP 0x1010 /* Device sleep status */
-#define GSR_QUEUE_FULL 0x0808 /* Queue status */
-#define GSR_PAGE_AVAIL 0x0404 /* Page buffer available status */
-#define GSR_PAGE_READY 0x0202 /* Page buffer status */
-#define GSR_PAGE_SELECT 0x0101 /* Page buffer select status */
-
-/* Definitions for Block Status Register */
-#define BSR_READY 0x8080 /* Block status */
-#define BSR_UNLOCK 0x4040 /* Block lock status */
-#define BSR_FAILED 0x2020 /* Block operation status */
-#define BSR_ABORTED 0x1010 /* Operation abort status */
-#define BSR_QUEUE_FULL 0x0808 /* Queue status */
-#define BSR_VPP_LOW 0x0404 /* Vpp status */
-
-#endif /* __MTD_IFLASH_H__ */
_
Patches currently in -mm which might be from rpjday@xxxxxxxxxxxxxx are
git-alsa.patch
remove-unused-header-file-arch-arm-mach-s3c2410-basth.patch
git-powerpc.patch
remove-unused-header-file-arch-ppc-syslib-cpc710h.patch
remove-unused-header-file-arch-powerpc-platforms-83xx-mpc834x_itxh.patch
git-drm.patch
git-mtd.patch
jffs2-delete-everything-related-to-obsolete-jffs2_proc.patch
mtd-delete-unused-header-file-linux-mtd-iflashh.patch
remove-unused-header-file-drivers-net-skfp-h-lnkstath.patch
remove-unused-header-file-drivers-net-wan-lmc-lmc_mediah.patch
pcmcia-delete-obsolete-pcmcia_ioctl-feature.patch
git-scsi-misc.patch
remove-some-unused-scsi-related-kernel-config-variables.patch
scsi-fix-obvious-typo-spin_lock_irqrestore-in-gdthc.patch
remove-unused-header-file-arch-m68k-atari-atasoundh.patch
remove-unused-header-file-drivers-serial-crisv10h.patch
remove-unused-header-file-arch-um-kernel-tt-include-mode_kern-tth.patch
reiserfs-correct-misspelled-reiserfs_proc_info-to.patch
kconfig-centralize-the-selection-of-semaphore-debugging.patch
rocket-remove-modversions-include.patch
remove-unused-header-file-drivers-message-i2o-i2o_lanh.patch
remove-unused-header-file-drivers-char-digih.patch
some-grammatical-fixups-and-additions-to-atomich-kernel-doc.patch
remove-unused-header-file-drivers-video-riva-nv4refh.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
