The patch titled
pata_pdc2027x: restore various updates done on the driver
has been removed from the -mm tree. Its filename was
pata_pdc2027x-restore-various-updates-done-on-the-driver.patch
This patch was dropped because an updated version will be merged
------------------------------------------------------
Subject: pata_pdc2027x: restore various updates done on the driver
From: Alan Cox <alan@xxxxxxxxxx>
- Use of cable_detect method
- ata_pci_default_filter needed on PATA100 ops
- Filter for UDMA 133 errata from vendor (not enabled in this diff but
added ready)
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_pdc2027x.c | 46 ++++++++++++++++++++++++++--------
1 file changed, 36 insertions(+), 10 deletions(-)
diff -puN drivers/ata/pata_pdc2027x.c~pata_pdc2027x-restore-various-updates-done-on-the-driver drivers/ata/pata_pdc2027x.c
--- a/drivers/ata/pata_pdc2027x.c~pata_pdc2027x-restore-various-updates-done-on-the-driver
+++ a/drivers/ata/pata_pdc2027x.c
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_pdc2027x"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "0.8ac1"
#undef PDC_DEBUG
#ifdef PDC_DEBUG
@@ -66,8 +66,10 @@ static int pdc2027x_init_one(struct pci_
static void pdc2027x_error_handler(struct ata_port *ap);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
-static void pdc2027x_post_set_mode(struct ata_port *ap);
static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
+static int pdc2027x_cable_detect(struct ata_port *ap);
+static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed);
/*
* ATA Timing Tables based on 133MHz controller clock.
@@ -146,6 +148,7 @@ static struct scsi_host_template pdc2027
static struct ata_port_operations pdc2027x_pata100_ops = {
.port_disable = ata_port_disable,
+ .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -166,6 +169,7 @@ static struct ata_port_operations pdc202
.thaw = ata_bmdma_thaw,
.error_handler = pdc2027x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = pdc2027x_cable_detect,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -261,7 +265,7 @@ static inline void __iomem *dev_mmio(str
}
/**
- * pdc2027x_pata_cbl_detect - Probe host controller cable detect info
+ * pdc2027x_pata_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
*
* Read 80c cable indicator from Promise extended register.
@@ -270,7 +274,7 @@ static inline void __iomem *dev_mmio(str
* LOCKING:
* None (inherited from caller).
*/
-static void pdc2027x_cbl_detect(struct ata_port *ap)
+static int pdc2027x_cable_detect(struct ata_port *ap)
{
u32 cgcr;
@@ -281,13 +285,10 @@ static void pdc2027x_cbl_detect(struct a
PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no);
- ap->cbl = ATA_CBL_PATA80;
- return;
-
+ return ATA_CBL_PATA80;
cbl40:
printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no);
- ap->cbl = ATA_CBL_PATA40;
- ap->udma_mask &= ATA_UDMA_MASK_40C;
+ return ATA_CBL_PATA40;
}
/**
@@ -315,7 +316,6 @@ static int pdc2027x_prereset(struct ata_
/* Check whether port enabled */
if (!pdc2027x_port_enabled(ap))
return -ENOENT;
- pdc2027x_cbl_detect(ap);
return ata_std_prereset(ap, deadline);
}
@@ -335,6 +335,32 @@ static void pdc2027x_error_handler(struc
}
/**
+ * pdc2720x_mode_filter - mode selection filter
+ * @adev: ATA device
+ * @mask: list of modes proposed
+ *
+ * Block UDMA on devices that cause trouble with this controller.
+ */
+
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+ unsigned char model_num[ATA_ID_PROD_LEN + 1];
+ struct ata_device *pair = ata_dev_pair(adev);
+
+ if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
+ return ata_pci_default_filter(adev, mask);
+
+ /* Check for slave of a Maxtor at UDMA6 */
+ ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
+ ATA_ID_PROD_LEN + 1);
+ /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
+ if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+ mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
+
+ return ata_pci_default_filter(adev, mask);
+}
+
+/**
* pdc2027x_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port to configure
* @adev: um
_
Patches currently in -mm which might be from alan@xxxxxxxxxx are
git-libata-all.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
ata_generic-remove-all-the-crud-again-and-use-cable.patch
pata_ali-remove-all-the-crap-again-and-switch-to.patch
pata_amd-remove-all-the-crud-and-restore-the-cable-detect.patch
pata_cs5535-re-remove-all-the-crap-and-switch-to-the-cable.patch
pata_cypress-re-remove-all-the-crap-and-switch-back-to.patch
pata_netcell-re-remove-all-the-crud.patch
pata_qdi-restore-cable-detect.patch
pata_sl82c105-restore-cable-detect-method.patch
pata_winbond-restore-cable-method.patch
libata-acpi-add-infrastructure-for-drivers-to-use.patch
pata_optidma-rework-for-cable-detect-and-to-remove.patch
pata_pdc2027x-restore-various-updates-done-on-the-driver.patch
pata_acpi-restore-driver.patch
resend-iphase-64bit-cleanup.patch
pci_module_init-convertion-in-tmscsimc.patch
tty-clarify-documentation-of-write.patch
tty-i386-x86_64-arbitary-speed-support.patch
revoke-special-mmap-handling.patch
revoke-add-documentation.patch
revoke-wire-up-i386-system-calls.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
