- pata_marvell-restore-cable-methods-and-reapply-lost-bug.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     pata_marvell: restore cable methods and reapply lost bug fix
has been removed from the -mm tree.  Its filename was
     pata_marvell-restore-cable-methods-and-reapply-lost-bug.patch

This patch was dropped because it was merged into mainline or a subsystem tree

------------------------------------------------------
Subject: pata_marvell: restore cable methods and reapply lost bug fix
From: Alan Cox <alan@xxxxxxxxxx>

Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/ata/pata_marvell.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff -puN drivers/ata/pata_marvell.c~pata_marvell-restore-cable-methods-and-reapply-lost-bug drivers/ata/pata_marvell.c
--- a/drivers/ata/pata_marvell.c~pata_marvell-restore-cable-methods-and-reapply-lost-bug
+++ a/drivers/ata/pata_marvell.c
@@ -20,7 +20,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_marvell"
-#define DRV_VERSION	"0.1.1"
+#define DRV_VERSION	"0.1.4"
 
 /**
  *	marvell_pre_reset	-	check for 40/80 pin
@@ -53,22 +53,23 @@ static int marvell_pre_reset(struct ata_
 	if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
 	    (!(devices & 0x10)))	/* PATA enable ? */
 		return -ENOENT;
+	return ata_std_prereset(ap, deadline);
+}
 
+static int marvell_cable_detect(struct ata_port *ap)
+{
 	/* Cable type */
 	switch(ap->port_no)
 	{
 	case 0:
 		if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
-			ap->cbl = ATA_CBL_PATA40;
-		else
-			ap->cbl = ATA_CBL_PATA80;
-		break;
-
+			return ATA_CBL_PATA40;
+		return ATA_CBL_PATA80;
 	case 1: /* Legacy SATA port */
-		ap->cbl = ATA_CBL_SATA;
-		break;
+		return ATA_CBL_SATA;
 	}
-	return ata_std_prereset(ap, deadline);
+	BUG();
+	return 0;	/* Our BUG macro needs the right markup */
 }
 
 /**
@@ -124,6 +125,7 @@ static const struct ata_port_operations 
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= marvell_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= marvell_cable_detect,
 
 	/* BMDMA handling is PCI ATA format, use helpers */
 	.bmdma_setup		= ata_bmdma_setup,
_

Patches currently in -mm which might be from alan@xxxxxxxxxx are

origin.patch
git-libata-all.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
ata_generic-remove-all-the-crud-again-and-use-cable.patch
pata_ali-remove-all-the-crap-again-and-switch-to.patch
pata_amd-remove-all-the-crud-and-restore-the-cable-detect.patch
pata_cs5535-re-remove-all-the-crap-and-switch-to-the-cable.patch
pata_cypress-re-remove-all-the-crap-and-switch-back-to.patch
pata_netcell-re-remove-all-the-crud.patch
pata_qdi-restore-cable-detect.patch
pata_sl82c105-restore-cable-detect-method.patch
pata_winbond-restore-cable-method.patch
libata-acpi-add-infrastructure-for-drivers-to-use.patch
pata_optidma-rework-for-cable-detect-and-to-remove.patch
pata_pdc2027x-restore-various-updates-done-on-the-driver.patch
pata_acpi-restore-driver.patch
resend-iphase-64bit-cleanup.patch
pci_module_init-convertion-in-tmscsimc.patch
tty-clarify-documentation-of-write.patch
tty-i386-x86_64-arbitary-speed-support.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux