The patch titled
pata_legacy: restore cable methods
has been removed from the -mm tree. Its filename was
pata_legacy-restore-cable-methods.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: pata_legacy: restore cable methods
From: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_legacy.c | 7 +++++++
1 file changed, 7 insertions(+)
diff -puN drivers/ata/pata_legacy.c~pata_legacy-restore-cable-methods drivers/ata/pata_legacy.c
--- a/drivers/ata/pata_legacy.c~pata_legacy-restore-cable-methods
+++ a/drivers/ata/pata_legacy.c
@@ -162,6 +162,7 @@ static struct ata_port_operations simple
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -185,6 +186,7 @@ static struct ata_port_operations legacy
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .cable_detect = ata_cable_40wire,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
@@ -305,6 +307,7 @@ static struct ata_port_operations pdc202
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -360,6 +363,7 @@ static struct ata_port_operations ht6560
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -426,6 +430,7 @@ static struct ata_port_operations ht6560
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -547,6 +552,7 @@ static struct ata_port_operations opti82
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -680,6 +686,7 @@ static struct ata_port_operations opti82
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = opti82c46x_qc_issue_prot,
_
Patches currently in -mm which might be from alan@xxxxxxxxxx are
origin.patch
git-libata-all.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
ata_generic-remove-all-the-crud-again-and-use-cable.patch
pata_ali-remove-all-the-crap-again-and-switch-to.patch
pata_amd-remove-all-the-crud-and-restore-the-cable-detect.patch
pata_cs5535-re-remove-all-the-crap-and-switch-to-the-cable.patch
pata_cypress-re-remove-all-the-crap-and-switch-back-to.patch
pata_netcell-re-remove-all-the-crud.patch
pata_qdi-restore-cable-detect.patch
pata_sl82c105-restore-cable-detect-method.patch
pata_winbond-restore-cable-method.patch
libata-acpi-add-infrastructure-for-drivers-to-use.patch
pata_optidma-rework-for-cable-detect-and-to-remove.patch
pata_pdc2027x-restore-various-updates-done-on-the-driver.patch
pata_acpi-restore-driver.patch
resend-iphase-64bit-cleanup.patch
pci_module_init-convertion-in-tmscsimc.patch
tty-clarify-documentation-of-write.patch
tty-i386-x86_64-arbitary-speed-support.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
