The patch titled
pata: expose set_mode method so it can be wrapped
has been removed from the -mm tree. Its filename was
expose-set_mode-method-so-it-can-be-wrapped.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: pata: expose set_mode method so it can be wrapped
From: Alan <alan@xxxxxxxxxxxxxxxxxxx>
This splits set_mode into do_set_mode and the wrapper so that a driver can
call the standard method inside its own. This in theory also obsoletes
->post_set_mode().
Needed for ACPI driver.
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Cc: Tejun Heo <htejun@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-core.c | 37 +++++++++++++++++++++++++++++-------
include/linux/libata.h | 1
2 files changed, 31 insertions(+), 7 deletions(-)
diff -puN drivers/ata/libata-core.c~expose-set_mode-method-so-it-can-be-wrapped drivers/ata/libata-core.c
--- a/drivers/ata/libata-core.c~expose-set_mode-method-so-it-can-be-wrapped
+++ a/drivers/ata/libata-core.c
@@ -2512,12 +2512,13 @@ static int ata_dev_set_mode(struct ata_d
}
/**
- * ata_set_mode - Program timings and issue SET FEATURES - XFER
+ * ata_do_set_mode - Program timings and issue SET FEATURES - XFER
* @ap: port on which timings will be programmed
* @r_failed_dev: out paramter for failed device
*
- * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
- * ata_set_mode() fails, pointer to the failing device is
+ * Standard implementation of the function used to tune and set
+ * ATA device disk transfer mode (PIO3, UDMA6, etc.). If
+ * ata_dev_set_mode() fails, pointer to the failing device is
* returned in @r_failed_dev.
*
* LOCKING:
@@ -2526,14 +2527,12 @@ static int ata_dev_set_mode(struct ata_d
* RETURNS:
* 0 on success, negative errno otherwise
*/
-int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+
+int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
{
struct ata_device *dev;
int i, rc = 0, used_dma = 0, found = 0;
- /* has private set_mode? */
- if (ap->ops->set_mode)
- return ap->ops->set_mode(ap, r_failed_dev);
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
@@ -2618,6 +2617,29 @@ int ata_set_mode(struct ata_port *ap, st
}
/**
+ * ata_set_mode - Program timings and issue SET FEATURES - XFER
+ * @ap: port on which timings will be programmed
+ * @r_failed_dev: out paramter for failed device
+ *
+ * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
+ * ata_set_mode() fails, pointer to the failing device is
+ * returned in @r_failed_dev.
+ *
+ * LOCKING:
+ * PCI/etc. bus probe sem.
+ *
+ * RETURNS:
+ * 0 on success, negative errno otherwise
+ */
+int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+{
+ /* has private set_mode? */
+ if (ap->ops->set_mode)
+ return ap->ops->set_mode(ap, r_failed_dev);
+ return ata_do_set_mode(ap, r_failed_dev);
+}
+
+/**
* ata_tf_to_host - issue ATA taskfile to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
@@ -6418,6 +6440,7 @@ EXPORT_SYMBOL_GPL(ata_altstatus);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_interrupt);
+EXPORT_SYMBOL_GPL(ata_do_set_mode);
EXPORT_SYMBOL_GPL(ata_data_xfer);
EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
EXPORT_SYMBOL_GPL(ata_qc_prep);
diff -puN include/linux/libata.h~expose-set_mode-method-so-it-can-be-wrapped include/linux/libata.h
--- a/include/linux/libata.h~expose-set_mode-method-so-it-can-be-wrapped
+++ a/include/linux/libata.h
@@ -824,6 +824,7 @@ extern void ata_scsi_slave_destroy(struc
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
+extern int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
extern u8 ata_irq_on(struct ata_port *ap);
extern u8 ata_dummy_irq_on(struct ata_port *ap);
extern u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq);
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
origin.patch
git-libata-all.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
baycom_ser_fdx-also-allow-i-o-ports-=-0x1000-and-enhanced.patch
resend-iphase-64bit-cleanup.patch
serial-suppress-rts-assertion-with-disabled-crtscts.patch
drivers-scsi-ncr5380c-replacing-yield-with-a.patch
drivers-scsi-mca_53c9xc-save_flags-cli-removal.patch
x86_64-do-not-enable-the-nmi-watchdog-by-default.patch
driver_bfin_serial_core.patch
driver_bfin_serial_core-update.patch
documentation-ask-driver-writers-to-provide-pm-support.patch
tty-clarify-documentation-of-write.patch
tty-i386-x86_64-arbitary-speed-support.patch
edac-new-opteron-athlon64-memory-controller-driver.patch
edac-k8-driver-coding-tidy.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
