The patch titled
pata_efar: switch back to cable methods
has been added to the -mm tree. Its filename is
pata_efar-switch-back-to-cable-methods.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: pata_efar: switch back to cable methods
From: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_efar.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
diff -puN drivers/ata/pata_efar.c~pata_efar-switch-back-to-cable-methods drivers/ata/pata_efar.c
--- a/drivers/ata/pata_efar.c~pata_efar-switch-back-to-cable-methods
+++ a/drivers/ata/pata_efar.c
@@ -22,10 +22,10 @@
#include <linux/ata.h>
#define DRV_NAME "pata_efar"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.4"
/**
- * efar_pre_reset - check for 40/80 pin
+ * efar_pre_reset - Enable bits
* @ap: Port
* @deadline: deadline jiffies for the operation
*
@@ -41,16 +41,8 @@ static int efar_pre_reset(struct ata_por
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 tmp;
-
if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
return -ENOENT;
-
- pci_read_config_byte(pdev, 0x47, &tmp);
- if (tmp & (2 >> ap->port_no))
- ap->cbl = ATA_CBL_PATA40;
- else
- ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(ap, deadline);
}
@@ -68,6 +60,25 @@ static void efar_error_handler(struct at
}
/**
+ * efar_cable_detect - check for 40/80 pin
+ * @ap: Port
+ *
+ * Perform cable detection for the EFAR ATA interface. This is
+ * different to the PIIX arrangement
+ */
+
+static int efar_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 tmp;
+
+ pci_read_config_byte(pdev, 0x47, &tmp);
+ if (tmp & (2 >> ap->port_no))
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
+}
+
+/**
* efar_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: um
@@ -257,6 +268,7 @@ static const struct ata_port_operations
.thaw = ata_bmdma_thaw,
.error_handler = efar_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = efar_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
_
Patches currently in -mm which might be from alan@xxxxxxxxxx are
git-libata-all.patch
expose-set_mode-method-so-it-can-be-wrapped.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
ata_generic-remove-all-the-crud-again-and-use-cable.patch
pata_ali-remove-all-the-crap-again-and-switch-to.patch
pata_amd-remove-all-the-crud-and-restore-the-cable-detect.patch
pata_artop-remove-all-the-crud-again-and-restore-the-cable.patch
pata_atiixp-restore-the-cable-method.patch
pata_cmd64x-restore-cable-method.patch
pata_cs5520-re-remove-crap-and-switch-to-cable-detect.patch
pata_cs5530-re-remove-all-the-crap-and-switch-back-to-the.patch
pata_cs5535-re-remove-all-the-crap-and-switch-to-the-cable.patch
pata_cypress-re-remove-all-the-crap-and-switch-back-to.patch
pata_efar-switch-back-to-cable-methods.patch
pata_hpt366-switch-back-to-cable-method-again.patch
pata_hpt3x3-switch-back-to-cable-method-and-re-remove-all.patch
pata_isapnp-put-cable-type-back.patch
pata_it8213-switch-to-cable-method-again.patch
pata_it821x-switch-back-to-cable-detect-and-re-remove-all.patch
pata_ixp4xx_cf-restore-cable-type-method.patch
pata_legacy-restore-cable-methods.patch
pata_marvell-restore-cable-methods-and-reapply-lost-bug.patch
pata_mpc52xx-restore-cable-method.patch
pata_mpiix-restore-cable-type-method.patch
pata_netcell-re-remove-all-the-crud.patch
pata_ns87410-restore-cable-detect-method.patch
pata_oldpiix-restore-cable-method-re-correct-comments.patch
pata_opti-restore-cable-method.patch
pata_pcmcia-restore-cable-reporting.patch
pata_pdc202xx_old-re-remove-crap-restore-cable-methods.patch
pata_qdi-restore-cable-detect.patch
pata_serverworks-re-remove-crap-restore-cable-detect.patch
pata_sil680-restore-cable-detect-methods.patch
pata_sis-restore-cable-method-re-perform-crapectory.patch
pata_sl82c105-restore-cable-detect-method.patch
pata_via-restore-cable-detect.patch
pata_winbond-restore-cable-method.patch
sata_via-use-cable-detect-methods.patch
libata-acpi-try-and-stop-all-the-non-pci-devices-crashing.patch
libata-acpi-add-infrastructure-for-drivers-to-use.patch
pata_optidma-rework-for-cable-detect-and-to-remove.patch
pata_pdc2027x-restore-various-updates-done-on-the-driver.patch
pata_acpi-restore-driver.patch
ata_piix-remove-ugly-layering-violation.patch
pata_cmd640-multiple-updates.patch
dilnetpc-fix-warning.patch
resend-iphase-64bit-cleanup.patch
pci_module_init-convertion-in-tmscsimc.patch
z85230-fix-fifo-handling.patch
tty-clarify-documentation-of-write.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
