+ pata_ns87410-cable-detect-method.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     pata_ns87410: cable detect method
has been added to the -mm tree.  Its filename is
     pata_ns87410-cable-detect-method.patch

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

------------------------------------------------------
Subject: pata_ns87410: cable detect method
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>

Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/ata/pata_ns87410.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff -puN drivers/ata/pata_ns87410.c~pata_ns87410-cable-detect-method drivers/ata/pata_ns87410.c
--- a/drivers/ata/pata_ns87410.c~pata_ns87410-cable-detect-method
+++ a/drivers/ata/pata_ns87410.c
@@ -28,13 +28,13 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ns87410"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.6"
 
 /**
  *	ns87410_pre_reset		-	probe begin
  *	@ap: ATA port
  *
- *	Set up cable type and use generic probe init
+ *	Check enabled ports
  */
 
 static int ns87410_pre_reset(struct ata_port *ap)
@@ -47,7 +47,6 @@ static int ns87410_pre_reset(struct ata_
 
 	if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -177,6 +176,7 @@ static struct ata_port_operations ns8741
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ns87410_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ns87410_qc_issue_prot,
_

Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are

git-libata-all.patch
expose-set_mode-method-so-it-can-be-wrapped.patch
acpi-driver-support-for-pata.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
pata_platform-set-a-cable-type-which-to-set.patch
pata_qdi-set-cable-type.patch
pata_sl82c105-missing-methods-cable.patch
ata_generic-remove-lots-of-code-using-the-new-cable_detect.patch
pata_ali-remove-lots-of-code-by-using-the-cable_detect.patch
pata_cs55x0-clean-up-by-using-the-cable_detect-method.patch
pata_cypress-clean-up-by-using-cable_detect-method.patch
pata_isapnp-set-cable-type.patch
pata_ixp4xx_cf-set-cable-type.patch
pata_legacy-fix-missing-methods-and-add-cable-types.patch
pata_netcell-remove-lots-of-crud-by-using-the-cable-method.patch
pata_radisys-switch-to-cable-method-to-cleanup-code.patch
pata_sc1200-set-cable-type-add-freeze-thaw-methods.patch
pata_rz1000-remove-lots-of-crap-by-using-cable-method.patch
pata_winbond-set-cable-type.patch
pata_cmd64x-various-fixes.patch
pata_hpt3x3-clean-up-by-using-cable-method.patch
ata_piix-remove-ugly-layering-violation.patch
pata_artop-cable-detect-methods.patch
pata_cs5535-cable-detect.patch
pata_hpt3x2n-cable-detect-handling-needs-work.patch
pata_it821x-clean-up-by-using-cable-methods.patch
pata_mpc52xx-cable-detect.patch
pata_mpiix-cable-detect-method.patch
pata_ns87410-cable-detect-method.patch
pata_oldpiix-cable-detect.patch
pata_opti-cable-detect.patch
pata_pcmcia-cable-detect.patch
pata_pdc202xx_old-cable-detect-clean-up.patch
pata_sil680-cable-detect.patch
pata_triflex-cable-detect.patch
sata_via-cable-detection.patch
pata_cmd640-multiple-updates.patch
pata_efar-switch-to-cable_detect-method.patch
pata_it8213-cable-detect.patch
pata_marvell-cable-and-reset-fixes.patch
pata_serverworks-cable-detect-and-comment-fix.patch
pata_sis-clean-up-using-cable_detect-methods.patch
pata_via-use-cable_detect-method.patch
pata_hpt366-cable-detect-methods.patch
pata_atiixp-switch-to-cable_detect-method-with-correct.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
resend-iphase-64bit-cleanup.patch
drivers-scsi-ncr5380c-replacing-yield-with-a.patch
drivers-scsi-mca_53c9xc-save_flags-cli-removal.patch
x86_64-do-not-enable-the-nmi-watchdog-by-default.patch
driver_bfin_serial_core.patch
driver_bfin_serial_core-update.patch
documentation-ask-driver-writers-to-provide-pm-support.patch
tty-clarify-documentation-of-write.patch
edac-new-opteron-athlon64-memory-controller-driver.patch
edac-k8-driver-coding-tidy.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux