The patch titled
pata_artop: cable detect methods
has been added to the -mm tree. Its filename is
pata_artop-cable-detect-methods.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: pata_artop: cable detect methods
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_artop.c | 26 ++++++++++++++++++--------
1 files changed, 18 insertions(+), 8 deletions(-)
diff -puN drivers/ata/pata_artop.c~pata_artop-cable-detect-methods drivers/ata/pata_artop.c
--- a/drivers/ata/pata_artop.c~pata_artop-cable-detect-methods
+++ a/drivers/ata/pata_artop.c
@@ -49,8 +49,6 @@ static int artop6210_pre_reset(struct at
if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
-
- ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -85,18 +83,28 @@ static int artop6260_pre_reset(struct at
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 tmp;
/* Odd numbered device ids are the units with enable bits (the -R cards) */
if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
+ return ata_std_prereset(ap);
+}
+
+/**
+ * artop6260_cable_detect - identify cable type
+ * @ap: Port
+ *
+ * Identify the cable type for the ARTOp interface in question
+ */
+static int artop6260_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 tmp;
pci_read_config_byte(pdev, 0x49, &tmp);
if (tmp & (1 << ap->port_no))
- ap->cbl = ATA_CBL_PATA40;
- else
- ap->cbl = ATA_CBL_PATA80;
- return ata_std_prereset(ap);
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
}
/**
@@ -225,7 +233,7 @@ static void artop6260_set_piomode(struct
/**
* artop6210_set_dmamode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
- * @adev: um
+ * @adev: Device whose timings we are configuring
*
* Set DMA mode for device, in host controller PCI config space.
*
@@ -333,6 +341,7 @@ static const struct ata_port_operations
.thaw = ata_bmdma_thaw,
.error_handler = artop6210_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -366,6 +375,7 @@ static const struct ata_port_operations
.thaw = ata_bmdma_thaw,
.error_handler = artop6260_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = artop6260_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
git-libata-all.patch
expose-set_mode-method-so-it-can-be-wrapped.patch
acpi-driver-support-for-pata.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
pata_platform-set-a-cable-type-which-to-set.patch
pata_qdi-set-cable-type.patch
pata_sl82c105-missing-methods-cable.patch
ata_generic-remove-lots-of-code-using-the-new-cable_detect.patch
pata_ali-remove-lots-of-code-by-using-the-cable_detect.patch
pata_cs55x0-clean-up-by-using-the-cable_detect-method.patch
pata_cypress-clean-up-by-using-cable_detect-method.patch
pata_isapnp-set-cable-type.patch
pata_ixp4xx_cf-set-cable-type.patch
pata_legacy-fix-missing-methods-and-add-cable-types.patch
pata_netcell-remove-lots-of-crud-by-using-the-cable-method.patch
pata_radisys-switch-to-cable-method-to-cleanup-code.patch
pata_sc1200-set-cable-type-add-freeze-thaw-methods.patch
pata_rz1000-remove-lots-of-crap-by-using-cable-method.patch
pata_winbond-set-cable-type.patch
pata_cmd64x-various-fixes.patch
pata_hpt3x3-clean-up-by-using-cable-method.patch
ata_piix-remove-ugly-layering-violation.patch
pata_artop-cable-detect-methods.patch
pata_cs5535-cable-detect.patch
pata_hpt3x2n-cable-detect-handling-needs-work.patch
pata_it821x-clean-up-by-using-cable-methods.patch
pata_mpc52xx-cable-detect.patch
pata_mpiix-cable-detect-method.patch
pata_ns87410-cable-detect-method.patch
pata_oldpiix-cable-detect.patch
pata_opti-cable-detect.patch
pata_pcmcia-cable-detect.patch
pata_pdc202xx_old-cable-detect-clean-up.patch
pata_sil680-cable-detect.patch
pata_triflex-cable-detect.patch
sata_via-cable-detection.patch
pata_cmd640-multiple-updates.patch
pata_efar-switch-to-cable_detect-method.patch
pata_it8213-cable-detect.patch
pata_marvell-cable-and-reset-fixes.patch
pata_serverworks-cable-detect-and-comment-fix.patch
pata_sis-clean-up-using-cable_detect-methods.patch
pata_via-use-cable_detect-method.patch
pata_hpt366-cable-detect-methods.patch
pata_atiixp-switch-to-cable_detect-method-with-correct.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
resend-iphase-64bit-cleanup.patch
drivers-scsi-ncr5380c-replacing-yield-with-a.patch
drivers-scsi-mca_53c9xc-save_flags-cli-removal.patch
x86_64-do-not-enable-the-nmi-watchdog-by-default.patch
driver_bfin_serial_core.patch
driver_bfin_serial_core-update.patch
documentation-ask-driver-writers-to-provide-pm-support.patch
tty-clarify-documentation-of-write.patch
edac-new-opteron-athlon64-memory-controller-driver.patch
edac-k8-driver-coding-tidy.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
