The patch titled
x86_64 irq: keep consistent for changing IRQ0_VECTOR from 0x20 to 0x30
has been removed from the -mm tree. Its filename was
x86_64-irq-keep-consistent-for-changing-irq0_vector-from-0x20-to-0x30.patch
This patch was dropped because it was nacked by the maintainer
------------------------------------------------------
Subject: x86_64 irq: keep consistent for changing IRQ0_VECTOR from 0x20 to 0x30
From: "Yinghai Lu" <yinghai.lu@xxxxxxx>
FIRST_EXTERNAL_VECTOR is used for IRQ_MOVE_CLEANUP_VECTOR, and IRQ0 starting
from FIRST_EXTERNAL_VECTOR + 0x10. So reduce interrupt array for IRQ.
Signed-off-by: Yinghai Lu <yinghai.lu@xxxxxxx>
Cc: Andi Kleen <ak@xxxxxxx>
Cc: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/x86_64/kernel/i8259.c | 16 ++++++++--------
arch/x86_64/kernel/io_apic.c | 2 +-
include/asm-x86_64/hw_irq.h | 2 +-
3 files changed, 10 insertions(+), 10 deletions(-)
diff -puN arch/x86_64/kernel/i8259.c~x86_64-irq-keep-consistent-for-changing-irq0_vector-from-0x20-to-0x30 arch/x86_64/kernel/i8259.c
--- a/arch/x86_64/kernel/i8259.c~x86_64-irq-keep-consistent-for-changing-irq0_vector-from-0x20-to-0x30
+++ a/arch/x86_64/kernel/i8259.c
@@ -45,7 +45,7 @@
/*
* ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x20-0x2f)
+ * (these are usually mapped to vectors 0x30-0x3f)
*/
/*
@@ -58,7 +58,7 @@
*
* (these are usually mapped into the 0x30-0xff vector range)
*/
- BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
+ BUILD_16_IRQS(0x3)
BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
@@ -77,8 +77,8 @@ BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BU
IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
/* for the irq vectors */
-static void (*interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
- IRQLIST_16(0x2), IRQLIST_16(0x3),
+static void (*interrupt[NR_VECTORS - IRQ0_VECTOR])(void) = {
+ IRQLIST_16(0x3),
IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
@@ -299,7 +299,7 @@ void init_8259A(int auto_eoi)
* outb_p - this has to work on a wide range of PC hardware.
*/
outb_p(0x11, 0x20); /* ICW1: select 8259A-1 init */
- outb_p(IRQ0_VECTOR, 0x21); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
+ outb_p(IRQ0_VECTOR, 0x21); /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
outb_p(0x04, 0x21); /* 8259A-1 (the master) has a slave on IR2 */
if (auto_eoi)
outb_p(0x03, 0x21); /* master does Auto EOI */
@@ -307,7 +307,7 @@ void init_8259A(int auto_eoi)
outb_p(0x01, 0x21); /* master expects normal EOI */
outb_p(0x11, 0xA0); /* ICW1: select 8259A-2 init */
- outb_p(IRQ8_VECTOR, 0xA1); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
+ outb_p(IRQ8_VECTOR, 0xA1); /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
outb_p(0x02, 0xA1); /* 8259A-2 is a slave on master's IR2 */
outb_p(0x01, 0xA1); /* (slave's support for AEOI in flat mode
is to be investigated) */
@@ -513,8 +513,8 @@ void __init init_IRQ(void)
* us. (some of these will be overridden and become
* 'special' SMP interrupts)
*/
- for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
+ for (i = 0; i < (NR_VECTORS - IRQ0_VECTOR); i++) {
+ int vector = IRQ0_VECTOR + i;
if (vector != IA32_SYSCALL_VECTOR)
set_intr_gate(vector, interrupt[i]);
}
diff -puN arch/x86_64/kernel/io_apic.c~x86_64-irq-keep-consistent-for-changing-irq0_vector-from-0x20-to-0x30 arch/x86_64/kernel/io_apic.c
--- a/arch/x86_64/kernel/io_apic.c~x86_64-irq-keep-consistent-for-changing-irq0_vector-from-0x20-to-0x30
+++ a/arch/x86_64/kernel/io_apic.c
@@ -1398,7 +1398,7 @@ asmlinkage void smp_irq_move_cleanup_int
irq_enter();
me = smp_processor_id();
- for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
+ for (vector = IRQ0_VECTOR; vector < NR_VECTORS; vector++) {
unsigned int irq;
struct irq_desc *desc;
struct irq_cfg *cfg;
diff -puN include/asm-x86_64/hw_irq.h~x86_64-irq-keep-consistent-for-changing-irq0_vector-from-0x20-to-0x30 include/asm-x86_64/hw_irq.h
--- a/include/asm-x86_64/hw_irq.h~x86_64-irq-keep-consistent-for-changing-irq0_vector-from-0x20-to-0x30
+++ a/include/asm-x86_64/hw_irq.h
@@ -38,7 +38,7 @@
#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
+ * Vectors 0x30-0x3f are used for ISA interrupts.
*/
#define IRQ0_VECTOR FIRST_EXTERNAL_VECTOR + 0x10
#define IRQ1_VECTOR IRQ0_VECTOR + 1
_
Patches currently in -mm which might be from yinghai.lu@xxxxxxx are
x86_64-irq-remove-extra-smp_processor_id-calling.patch
x86_64-irq-keep-consistent-for-changing-irq0_vector-from-0x20-to-0x30.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
