The patch titled
pata_ali: remove lots of code by using the cable_detect method
has been removed from the -mm tree. Its filename was
pata_ali-remove-lots-of-code-by-using-the-cable_detect.patch
This patch was dropped because it needs libata-cable-detection-fixes.patch
------------------------------------------------------
Subject: pata_ali: remove lots of code by using the cable_detect method
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_ali.c | 65 ++++-----------------------------------
1 files changed, 8 insertions(+), 57 deletions(-)
diff -puN drivers/ata/pata_ali.c~pata_ali-remove-lots-of-code-by-using-the-cable_detect drivers/ata/pata_ali.c
--- a/drivers/ata/pata_ali.c~pata_ali-remove-lots-of-code-by-using-the-cable_detect
+++ a/drivers/ata/pata_ali.c
@@ -90,59 +90,6 @@ static int ali_c2_cable_detect(struct at
}
/**
- * ali_early_error_handler - reset for eary chip
- * @ap: ATA port
- *
- * Handle the reset callback for the later chips with cable detect
- */
-
-static int ali_c2_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ali_c2_cable_detect(ap);
- return ata_std_prereset(ap);
-}
-
-static void ali_c2_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ali_c2_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
- * ali_early_cable_detect - cable detection
- * @ap: ATA port
- *
- * Perform cable detection for older chipsets. This turns out to be
- * rather easy to implement
- */
-
-static int ali_early_cable_detect(struct ata_port *ap)
-{
- return ATA_CBL_PATA40;
-}
-
-/**
- * ali_early_probe_init - reset for early chip
- * @ap: ATA port
- *
- * Handle the reset callback for the early (pre cable detect) chips.
- */
-
-static int ali_early_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ali_early_cable_detect(ap);
- return ata_std_prereset(ap);
-}
-
-static void ali_early_error_handler(struct ata_port *ap)
-{
- return ata_bmdma_drive_eh(ap, ali_early_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
* ali_20_filter - filter for earlier ALI DMA
* @ap: ALi ATA port
* @adev: attached device
@@ -364,8 +311,9 @@ static struct ata_port_operations ali_ea
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_early_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -400,8 +348,9 @@ static struct ata_port_operations ali_20
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_early_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -438,8 +387,9 @@ static struct ata_port_operations ali_c2
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_c2_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -475,8 +425,9 @@ static struct ata_port_operations ali_c5
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_c2_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
origin.patch
cyclades-return-closing_wait.patch
git-libata-all.patch
libata-warn-if-speed-limited-due-to-40-wire-cable-v2.patch
expose-set_mode-method-so-it-can-be-wrapped.patch
acpi-driver-support-for-pata.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
pata_ali-remove-lots-of-code-by-using-the-cable_detect.patch
pata_cs55x0-clean-up-by-using-the-cable_detect-method.patch
pata_cypress-clean-up-by-using-cable_detect-method.patch
pata_isapnp-set-cable-type.patch
pata_ixp4xx_cf-set-cable-type.patch
pata_legacy-fix-missing-methods-and-add-cable-types.patch
pata_netcell-remove-lots-of-crud-by-using-the-cable-method.patch
pata_radisys-switch-to-cable-method-to-cleanup-code.patch
pata_sc1200-set-cable-type-add-freeze-thaw-methods.patch
pata_rz1000-remove-lots-of-crap-by-using-cable-method.patch
pata_winbond-set-cable-type.patch
pata_cmd64x-various-fixes.patch
pata_hpt3x3-clean-up-by-using-cable-method.patch
pata_qdi-fix-initialisation.patch
pata_cmd640-cmd640-pci-support.patch
libata-kconfig-update-the-various-experimentality-levels.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
resend-iphase-64bit-cleanup.patch
drivers-scsi-ncr5380c-replacing-yield-with-a.patch
drivers-scsi-mca_53c9xc-save_flags-cli-removal.patch
x86_64-do-not-enable-the-nmi-watchdog-by-default.patch
driver_bfin_serial_core.patch
driver_bfin_serial_core-update.patch
documentation-ask-driver-writers-to-provide-pm-support.patch
tty-clarify-documentation-of-write.patch
edac-new-opteron-athlon64-memory-controller-driver.patch
edac-k8-driver-coding-tidy.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
