The patch titled
pata_cmd64x - various fixes
has been added to the -mm tree. Its filename is
pata_cmd64x-various-fixes.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: pata_cmd64x - various fixes
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
This driver still needs more work but for the moment
- It's a CMD not ATI driver
- Clean up code by using cable method
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_cmd64x.c | 36 ++++++++++--------------------------
1 files changed, 10 insertions(+), 26 deletions(-)
diff -puN drivers/ata/pata_cmd64x.c~pata_cmd64x-various-fixes drivers/ata/pata_cmd64x.c
--- a/drivers/ata/pata_cmd64x.c~pata_cmd64x-various-fixes
+++ a/drivers/ata/pata_cmd64x.c
@@ -1,5 +1,5 @@
/*
- * pata_cmd64x.c - ATI PATA for new ATA layer
+ * pata_cmd64x.c - CMD64x PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@xxxxxxxxxx>
*
@@ -75,13 +75,7 @@ enum {
DTPR1 = 0x7C
};
-static int cmd64x_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ATA_CBL_PATA40;
- return ata_std_prereset(ap);
-}
-
-static int cmd648_pre_reset(struct ata_port *ap)
+static int cmd648_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 r;
@@ -89,21 +83,8 @@ static int cmd648_pre_reset(struct ata_p
/* Check cable detect bits */
pci_read_config_byte(pdev, BMIDECSR, &r);
if (r & (1 << ap->port_no))
- ap->cbl = ATA_CBL_PATA80;
- else
- ap->cbl = ATA_CBL_PATA40;
-
- return ata_std_prereset(ap);
-}
-
-static void cmd64x_error_handler(struct ata_port *ap)
-{
- return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static void cmd648_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ATA_CBL_PATA80;
+ return ATA_CBL_PATA40;
}
/**
@@ -302,8 +283,9 @@ static struct ata_port_operations cmd64x
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = cmd64x_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -336,8 +318,9 @@ static struct ata_port_operations cmd646
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = cmd64x_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -370,8 +353,9 @@ static struct ata_port_operations cmd648
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = cmd648_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = cmd648_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
_
Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are
cyclades-return-closing_wait.patch
libata-warn-if-speed-limited-due-to-40-wire-cable-v2.patch
expose-set_mode-method-so-it-can-be-wrapped.patch
acpi-driver-support-for-pata.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
libata-cable-detection-fixes.patch
libata-dev_config-does-not-need-ap-and-adev-passing.patch
pata_platform-set-a-cable-type-which-to-set.patch
pata_qdi-set-cable-type.patch
pata_sl82c105-missing-methods-cable.patch
ata_generic-remove-lots-of-code-using-the-new-cable_detect.patch
pata_ali-remove-lots-of-code-by-using-the-cable_detect.patch
pata_cs55x0-clean-up-by-using-the-cable_detect-method.patch
pata_cypress-clean-up-by-using-cable_detect-method.patch
pata_isapnp-set-cable-type.patch
pata_ixp4xx_cf-set-cable-type.patch
pata_legacy-fix-missing-methods-and-add-cable-types.patch
pata_netcell-remove-lots-of-crud-by-using-the-cable-method.patch
pata_radisys-switch-to-cable-method-to-cleanup-code.patch
pata_sc1200-set-cable-type-add-freeze-thaw-methods.patch
pata_rz1000-remove-lots-of-crap-by-using-cable-method.patch
pata_winbond-set-cable-type.patch
pata_cmd64x-various-fixes.patch
pata_hpt3x3-clean-up-by-using-cable-method.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
resend-iphase-64bit-cleanup.patch
drivers-scsi-ncr5380c-replacing-yield-with-a.patch
drivers-scsi-mca_53c9xc-save_flags-cli-removal.patch
x86_64-do-not-enable-the-nmi-watchdog-by-default.patch
driver_bfin_serial_core.patch
driver_bfin_serial_core-update.patch
documentation-ask-driver-writers-to-provide-pm-support.patch
fixes-and-cleanups-for-earlyprintk-aka-boot-console.patch
tty-clarify-documentation-of-write.patch
edac-new-opteron-athlon64-memory-controller-driver.patch
edac-k8-driver-coding-tidy.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
