+ pata_sl82c105-missing-methods-cable.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     pata_sl82c105: Missing methods, cable
has been added to the -mm tree.  Its filename is
     pata_sl82c105-missing-methods-cable.patch

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

------------------------------------------------------
Subject: pata_sl82c105: Missing methods, cable
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>

Missing freeze, thaw, post_internal methods, also switch to new cable method
in passing.

Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/ata/pata_sl82c105.c |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletion(-)

diff -puN drivers/ata/pata_sl82c105.c~pata_sl82c105-missing-methods-cable drivers/ata/pata_sl82c105.c
--- a/drivers/ata/pata_sl82c105.c~pata_sl82c105-missing-methods-cable
+++ a/drivers/ata/pata_sl82c105.c
@@ -58,7 +58,6 @@ static int sl82c105_pre_reset(struct ata
 
 	if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -234,7 +233,11 @@ static struct ata_port_operations sl82c1
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,
 
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
 	.error_handler	= sl82c105_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= sl82c105_bmdma_start,
_

Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are

cyclades-return-closing_wait.patch
libata-warn-if-speed-limited-due-to-40-wire-cable-v2.patch
expose-set_mode-method-so-it-can-be-wrapped.patch
acpi-driver-support-for-pata.patch
pcmcia-spot-slave-decode-flaws-for-testing.patch
libata-cable-detection-fixes.patch
libata-dev_config-does-not-need-ap-and-adev-passing.patch
pata_platform-set-a-cable-type-which-to-set.patch
pata_qdi-set-cable-type.patch
pata_sl82c105-missing-methods-cable.patch
libata-fix-hopefully-all-the-remaining-problems-with.patch
resend-iphase-64bit-cleanup.patch
drivers-scsi-ncr5380c-replacing-yield-with-a.patch
drivers-scsi-mca_53c9xc-save_flags-cli-removal.patch
x86_64-do-not-enable-the-nmi-watchdog-by-default.patch
driver_bfin_serial_core.patch
driver_bfin_serial_core-update.patch
documentation-ask-driver-writers-to-provide-pm-support.patch
fixes-and-cleanups-for-earlyprintk-aka-boot-console.patch
tty-clarify-documentation-of-write.patch
edac-new-opteron-athlon64-memory-controller-driver.patch
edac-k8-driver-coding-tidy.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux