The patch titled
serial: serial_txx9 driver update
has been removed from the -mm tree. Its filename was
serial-serial_txx9-driver-update.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: serial: serial_txx9 driver update
From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
Return-Path: <anemo@xxxxxxxxxxxxx>
Received: from localhost (bix [127.0.0.1])
by localhost.localdomain (8.12.10/8.12.10) with ESMTP id l1LFUtfJ030065
for <akpm@localhost>; Wed, 21 Feb 2007 07:30:55 -0800
Received: from bix [127.0.0.1]
by localhost with POP3 (fetchmail-6.2.0)
for akpm@localhost (single-drop); Wed, 21 Feb 2007 07:30:55 -0800 (PST)
Received: from smtp1.osdl.org (smtp1.osdl.org [65.172.181.25])
by shell0.pdx.osdl.net (8.13.1/8.11.6) with ESMTP id l1LFVrGa017512
for <akpm@xxxxxxxxxxxxxxxxxxxxx>; Wed, 21 Feb 2007 07:31:53 -0800
Received: from smtp.mba.ocn.ne.jp (mba.ocn.ne.jp [210.190.142.172])
by smtp1.osdl.org (8.13.5.20060308/8.13.5/Debian-3ubuntu1.1) with ESMTP id l1LFViba016283
for <akpm@xxxxxxxxxxxxxxxxxxxx>; Wed, 21 Feb 2007 07:31:46 -0800
Received: from localhost (p7058-ipad205funabasi.chiba.ocn.ne.jp [222.146.102.58])
by smtp.mba.ocn.ne.jp (Postfix) with ESMTP
id 0C9CFBA61; Thu, 22 Feb 2007 00:31:43 +0900 (JST)
Date: Thu, 22 Feb 2007 00:31:42 +0900 (JST)
Message-Id: <20070222.003142.106263613.anemo@xxxxxxxxxxxxx>
To: linux-kernel@xxxxxxxxxxxxxxx
Cc: akpm@xxxxxxxxxxxxxxxxxxxx, ralf@xxxxxxxxxxxxxx
Subject: [PATCH 2.6.21-rc1] serial: serial_txx9 driver update
X-Fingerprint: 6ACA 1623 39BD 9A94 9B1A B746 CA77 FE94 2874 D52F
X-Pgp-Public-Key: http://wwwkeys.pgp.net/pks/lookup?op=get&search=0x2874D52F
X-Mailer: Mew version 3.3 on Emacs 21.4 / Mule 5.0 (SAKAKI)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Received-SPF: pass (domain of anemo@xxxxxxxxxxxxx designates 210.190.142.172 as permitted sender)
X-MIMEDefang-Filter: osdl$Revision: 1.176 $
X-Scanned-By: MIMEDefang 2.53 on 65.172.181.25
X-Spam-Checker-Version: SpamAssassin 3.0.2 (2004-11-16) on bix
X-Spam-Level:
X-Spam-Status: No, score=-1.7 required=2.0 tests=BAYES_00 autolearn=ham
version=3.0.2
Update the serial_txx9 driver.
* Use platform_device.
* Fix and cleanup suspend/resume codes.
Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
---
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index f4440d3..124d056 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -38,6 +38,8 @@
* Fix some spin_locks.
* Do not call uart_add_one_port for absent ports.
* 1.07 Use CONFIG_SERIAL_TXX9_NR_UARTS. Cleanup.
+ * 1.08 Use platform_device.
+ * Fix and cleanup suspend/resume codes.
*/
#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -50,7 +52,7 @@
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
@@ -60,7 +62,7 @@
#include <asm/io.h>
-static char *serial_version = "1.07";
+static char *serial_version = "1.08";
static char *serial_name = "TX39/49 Serial driver";
#define PASS_LIMIT 256
@@ -94,12 +96,7 @@ static char *serial_name = "TX39/49 Seri
struct uart_txx9_port {
struct uart_port port;
-
- /*
- * We provide a per-port pm hook.
- */
- void (*pm)(struct uart_port *port,
- unsigned int state, unsigned int old);
+ /* No additional info for now */
};
#define TXX9_REGION_SIZE 0x24
@@ -277,6 +274,32 @@ static void serial_txx9_enable_ms(struct
/* TXX9-SIO can not control DTR... */
}
+static void serial_txx9_initialize(struct uart_port *port)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+
+ sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
+#ifdef CONFIG_CPU_TX49XX
+ /* TX4925 BUG WORKAROUND. Accessing SIOC register
+ * immediately after soft reset causes bus error. */
+ iob();
+ udelay(1);
+#endif
+ while (sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST)
+ ;
+ /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
+ sio_set(up, TXX9_SIFCR,
+ TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1);
+ /* initial settings */
+ sio_out(up, TXX9_SILCR,
+ TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
+ ((up->port.flags & UPF_TXX9_USE_SCLK) ?
+ TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
+ sio_quot_set(up, uart_get_divisor(port, 9600));
+ sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
+ sio_out(up, TXX9_SIDICR, 0);
+}
+
static inline void
receive_chars(struct uart_txx9_port *up, unsigned int *status)
{
@@ -657,9 +680,8 @@ static void
serial_txx9_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
- if (up->pm)
- up->pm(port, state, oldstate);
+ if (state == 0)
+ serial_txx9_initialize(port);
}
static int serial_txx9_request_resource(struct uart_txx9_port *up)
@@ -732,7 +754,6 @@ static int serial_txx9_request_port(stru
static void serial_txx9_config_port(struct uart_port *port, int uflags)
{
struct uart_txx9_port *up = (struct uart_txx9_port *)port;
- unsigned long flags;
int ret;
/*
@@ -749,30 +770,7 @@ static void serial_txx9_config_port(stru
if (up->port.line == up->port.cons->index)
return;
#endif
- spin_lock_irqsave(&up->port.lock, flags);
- /*
- * Reset the UART.
- */
- sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
-#ifdef CONFIG_CPU_TX49XX
- /* TX4925 BUG WORKAROUND. Accessing SIOC register
- * immediately after soft reset causes bus error. */
- iob();
- udelay(1);
-#endif
- while (sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST)
- ;
- /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
- sio_set(up, TXX9_SIFCR,
- TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1);
- /* initial settings */
- sio_out(up, TXX9_SILCR,
- TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
- ((up->port.flags & UPF_TXX9_USE_SCLK) ?
- TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
- sio_quot_set(up, uart_get_divisor(port, 9600));
- sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
- spin_unlock_irqrestore(&up->port.lock, flags);
+ serial_txx9_initialize(port);
}
static int
@@ -818,7 +816,8 @@ static struct uart_ops serial_txx9_pops
static struct uart_txx9_port serial_txx9_ports[UART_NR];
-static void __init serial_txx9_register_ports(struct uart_driver *drv)
+static void __init serial_txx9_register_ports(struct uart_driver *drv,
+ struct device *dev)
{
int i;
@@ -827,6 +826,7 @@ static void __init serial_txx9_register_
up->port.line = i;
up->port.ops = &serial_txx9_pops;
+ up->port.dev = dev;
if (up->port.iobase || up->port.mapbase)
uart_add_one_port(drv, &up->port);
}
@@ -898,7 +898,7 @@ serial_txx9_console_write(struct console
sio_out(up, TXX9_SIDICR, ier);
}
-static int serial_txx9_console_setup(struct console *co, char *options)
+static int __init serial_txx9_console_setup(struct console *co, char *options)
{
struct uart_port *port;
struct uart_txx9_port *up;
@@ -919,17 +919,7 @@ static int serial_txx9_console_setup(str
if (!port->ops)
return -ENODEV;
- /*
- * Disable UART interrupts, set DTR and RTS high
- * and set speed.
- */
- sio_out(up, TXX9_SIDICR, 0);
- /* initial settings */
- sio_out(up, TXX9_SILCR,
- TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
- ((port->flags & UPF_TXX9_USE_SCLK) ?
- TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
- sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
+ serial_txx9_initialize(&up->port);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -981,31 +971,6 @@ int __init early_serial_txx9_setup(struc
return 0;
}
-#ifdef ENABLE_SERIAL_TXX9_PCI
-#ifdef CONFIG_PM
-/**
- * serial_txx9_suspend_port - suspend one serial port
- * @line: serial line number
- *
- * Suspend one serial port.
- */
-static void serial_txx9_suspend_port(int line)
-{
- uart_suspend_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
-}
-
-/**
- * serial_txx9_resume_port - resume one serial port
- * @line: serial line number
- *
- * Resume one serial port.
- */
-static void serial_txx9_resume_port(int line)
-{
- uart_resume_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
-}
-#endif
-
static DEFINE_MUTEX(serial_txx9_mutex);
/**
@@ -1028,8 +993,18 @@ static int __devinit serial_txx9_registe
mutex_lock(&serial_txx9_mutex);
for (i = 0; i < UART_NR; i++) {
uart = &serial_txx9_ports[i];
- if (!(uart->port.iobase || uart->port.mapbase))
+ if (uart_match_port(&uart->port, port)) {
+ uart_remove_one_port(&serial_txx9_reg, &uart->port);
break;
+ }
+ }
+ if (i == UART_NR) {
+ /* Find unused port */
+ for (i = 0; i < UART_NR; i++) {
+ uart = &serial_txx9_ports[i];
+ if (!(uart->port.iobase || uart->port.mapbase))
+ break;
+ }
}
if (i < UART_NR) {
uart->port.iobase = port->iobase;
@@ -1072,6 +1047,95 @@ static void __devexit serial_txx9_unregi
}
/*
+ * Register a set of serial devices attached to a platform device.
+ */
+static int __devinit serial_txx9_probe(struct platform_device *dev)
+{
+ struct uart_port *p = dev->dev.platform_data;
+ struct uart_port port;
+ int ret, i;
+
+ memset(&port, 0, sizeof(struct uart_port));
+ for (i = 0; p && p->uartclk != 0; p++, i++) {
+ port.iobase = p->iobase;
+ port.membase = p->membase;
+ port.irq = p->irq;
+ port.uartclk = p->uartclk;
+ port.iotype = p->iotype;
+ port.flags = p->flags;
+ port.mapbase = p->mapbase;
+ port.dev = &dev->dev;
+ ret = serial_txx9_register_port(&port);
+ if (ret < 0) {
+ dev_err(&dev->dev, "unable to register port at index %d "
+ "(IO%x MEM%lx IRQ%d): %d\n", i,
+ p->iobase, p->mapbase, p->irq, ret);
+ }
+ }
+ return 0;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int __devexit serial_txx9_remove(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_txx9_port *up = &serial_txx9_ports[i];
+
+ if (up->port.dev == &dev->dev)
+ serial_txx9_unregister_port(i);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_txx9_port *up = &serial_txx9_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ uart_suspend_port(&serial_txx9_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static int serial_txx9_resume(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_txx9_port *up = &serial_txx9_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+ uart_resume_port(&serial_txx9_reg, &up->port);
+ }
+
+ return 0;
+}
+#endif
+
+static struct platform_driver serial_txx9_plat_driver = {
+ .probe = serial_txx9_probe,
+ .remove = __devexit_p(serial_txx9_remove),
+#ifdef CONFIG_PM
+ .suspend = serial_txx9_suspend,
+ .resume = serial_txx9_resume,
+#endif
+ .driver = {
+ .name = "serial_txx9",
+ .owner = THIS_MODULE,
+ },
+};
+
+#ifdef ENABLE_SERIAL_TXX9_PCI
+/*
* Probe one serial board. Unfortunately, there is no rhyme nor reason
* to the arrangement of serial ports on a PCI card.
*/
@@ -1097,20 +1161,22 @@ pciserial_txx9_init_one(struct pci_dev *
line = serial_txx9_register_port(&port);
if (line < 0) {
printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line);
+ pci_disable_device(dev);
+ return line;
}
- pci_set_drvdata(dev, (void *)(long)line);
+ pci_set_drvdata(dev, &serial_txx9_ports[line]);
return 0;
}
static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev)
{
- int line = (int)(long)pci_get_drvdata(dev);
+ struct uart_txx9_port *up = pci_get_drvdata(dev);
pci_set_drvdata(dev, NULL);
- if (line) {
- serial_txx9_unregister_port(line);
+ if (up) {
+ serial_txx9_unregister_port(up->port.line);
pci_disable_device(dev);
}
}
@@ -1118,10 +1184,10 @@ static void __devexit pciserial_txx9_rem
#ifdef CONFIG_PM
static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state)
{
- int line = (int)(long)pci_get_drvdata(dev);
+ struct uart_txx9_port *up = pci_get_drvdata(dev);
- if (line)
- serial_txx9_suspend_port(line);
+ if (up)
+ uart_suspend_port(&serial_txx9_reg, &up->port);
pci_save_state(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
@@ -1129,15 +1195,12 @@ static int pciserial_txx9_suspend_one(st
static int pciserial_txx9_resume_one(struct pci_dev *dev)
{
- int line = (int)(long)pci_get_drvdata(dev);
+ struct uart_txx9_port *up = pci_get_drvdata(dev);
pci_set_power_state(dev, PCI_D0);
pci_restore_state(dev);
-
- if (line) {
- pci_enable_device(dev);
- serial_txx9_resume_port(line);
- }
+ if (up)
+ uart_resume_port(&serial_txx9_reg, &up->port);
return 0;
}
#endif
@@ -1161,6 +1224,8 @@ static struct pci_driver serial_txx9_pci
MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl);
#endif /* ENABLE_SERIAL_TXX9_PCI */
+static struct platform_device *serial_txx9_plat_devs;
+
static int __init serial_txx9_init(void)
{
int ret;
@@ -1168,13 +1233,39 @@ static int __init serial_txx9_init(void)
printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
ret = uart_register_driver(&serial_txx9_reg);
- if (ret >= 0) {
- serial_txx9_register_ports(&serial_txx9_reg);
+ if (ret)
+ goto out;
+
+ serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1);
+ if (!serial_txx9_plat_devs) {
+ ret = -ENOMEM;
+ goto unreg_uart_drv;
+ }
+
+ ret = platform_device_add(serial_txx9_plat_devs);
+ if (ret)
+ goto put_dev;
+
+ serial_txx9_register_ports(&serial_txx9_reg,
+ &serial_txx9_plat_devs->dev);
+
+ ret = platform_driver_register(&serial_txx9_plat_driver);
+ if (ret)
+ goto del_dev;
#ifdef ENABLE_SERIAL_TXX9_PCI
- ret = pci_register_driver(&serial_txx9_pci_driver);
+ ret = pci_register_driver(&serial_txx9_pci_driver);
#endif
- }
+ if (ret == 0)
+ goto out;
+
+ del_dev:
+ platform_device_del(serial_txx9_plat_devs);
+ put_dev:
+ platform_device_put(serial_txx9_plat_devs);
+ unreg_uart_drv:
+ uart_unregister_driver(&serial_txx9_reg);
+ out:
return ret;
}
@@ -1185,6 +1276,8 @@ static void __exit serial_txx9_exit(void
#ifdef ENABLE_SERIAL_TXX9_PCI
pci_unregister_driver(&serial_txx9_pci_driver);
#endif
+ platform_driver_unregister(&serial_txx9_plat_driver);
+ platform_device_unregister(serial_txx9_plat_devs);
for (i = 0; i < UART_NR; i++) {
struct uart_txx9_port *up = &serial_txx9_ports[i];
if (up->port.iobase || up->port.mapbase)
Patches currently in -mm which might be from anemo@xxxxxxxxxxxxx are
8139too-fix-irq-problem-with-napi-netpoll.patch
x86_64-fix-section-mismatch-warnings.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
