+ spi_s3c2410_gpioc-spi-mode-2-and-3-support.patch added to -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     spi_s3c2410_gpio.c spi mode 2 and 3 support
has been added to the -mm tree.  Its filename is
     spi_s3c2410_gpioc-spi-mode-2-and-3-support.patch

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this

------------------------------------------------------
Subject: spi_s3c2410_gpio.c spi mode 2 and 3 support
From: Harald Welte <laforge@xxxxxxxxxxxx>

Add transfer modes 2 and 3 to the S3C24XX gpio SPI driver

Signed-off-by: Harald Welte <laforge@xxxxxxxxxxxx>
Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx>
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 drivers/spi/spi_s3c24xx_gpio.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+)

diff -puN drivers/spi/spi_s3c24xx_gpio.c~spi_s3c2410_gpioc-spi-mode-2-and-3-support drivers/spi/spi_s3c24xx_gpio.c
--- a/drivers/spi/spi_s3c24xx_gpio.c~spi_s3c2410_gpioc-spi-mode-2-and-3-support
+++ a/drivers/spi/spi_s3c24xx_gpio.c
@@ -73,6 +73,19 @@ static u32 s3c2410_spigpio_txrx_mode1(st
 	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
 }
 
+static u32 s3c2410_spigpio_txrx_mode2(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+static u32 s3c2410_spigpio_txrx_mode3(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+
 static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value)
 {
 	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
@@ -108,6 +121,8 @@ static int s3c2410_spigpio_probe(struct 
 
 	sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
 	sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+	sp->bitbang.txrx_word[SPI_MODE_2] = s3c2410_spigpio_txrx_mode2;
+	sp->bitbang.txrx_word[SPI_MODE_3] = s3c2410_spigpio_txrx_mode3;
 
 	/* set state of spi pins */
 	s3c2410_gpio_setpin(sp->info->pin_clk, 0);
_

Patches currently in -mm which might be from laforge@xxxxxxxxxxxx are

spi_s3c2410_gpioc-spi-mode-2-and-3-support.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux