The patch titled
Dynamic kernel command-line: common
has been removed from the -mm tree. Its filename was
dynamic-kernel-command-line-common.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: Dynamic kernel command-line: common
From: Alon Bar-Lev <alon.barlev@xxxxxxxxx>
Current implementation stores a static command-line buffer allocated to
COMMAND_LINE_SIZE size. Most architectures stores two copies of this buffer,
one for future reference and one for parameter parsing.
Current kernel command-line size for most architecture is much too small for
module parameters, video settings, initramfs paramters and much more. The
problem is that setting COMMAND_LINE_SIZE to a grater value, allocates static
buffers.
In order to allow a greater command-line size, these buffers should be
dynamically allocated or marked as init disposable buffers, so unused memory
can be released.
This patch renames the static saved_command_line variable into
boot_command_line adding __initdata attribute, so that it can be disposed
after initialization. This rename is required so applications that use
saved_command_line will not be affected by this change.
It reintroduces saved_command_line as dynamically allocated buffer to match
the data in boot_command_line.
It also mark secondary command-line buffer as __initdata, and copies it to
dynamically allocated static_command_line buffer components may hold reference
to it after initialization.
This patch is for linux-2.6.20-rc4-mm1 and is divided to target each
architecture. I could not check this in any architecture so please forgive me
if I got it wrong.
The per-architecture modification is very simple, use boot_command_line in
place of saved_command_line. The common code is the change into dynamic
command-line.
This patch:
1. Rename saved_command_line into boot_command_line, mark as init
disposable.
2. Add dynamic allocated saved_command_line.
3. Add dynamic allocated static_command_line.
4. During startup copy: boot_command_line into saved_command_line. arch
command_line into static_command_line.
5. Parse static_command_line and not arch command_line, so arch
command_line may be freed.
Signed-off-by: Alon Bar-Lev <alon.barlev@xxxxxxxxx>
Cc: Andi Kleen <ak@xxxxxx>
Cc: Paul Mackerras <paulus@xxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Richard Henderson <rth@xxxxxxxxxxx>
Cc: Ivan Kokshaysky <ink@xxxxxxxxxxxxxxxxxxxx>
Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
Cc: Ian Molton <spyro@xxxxxxx>
Cc: Mikael Starvik <starvik@xxxxxxxx>
Cc: David Howells <dhowells@xxxxxxxxxx>
Cc: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Kyle McMartin <kyle@xxxxxxxxxxx>
Cc: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
Cc: Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
Cc: Hirokazu Takata <takata@xxxxxxxxxxxxxx>
Cc: Paul Mundt <lethal@xxxxxxxxxxxx>
Cc: Kazumoto Kojima <kkojima@xxxxxxxxxxxxxx>
Cc: Richard Curnow <rc@xxxxxxxxxx>
Cc: William Lee Irwin III <wli@xxxxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Jeff Dike <jdike@xxxxxxxxxxx>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@xxxxxxxx>
Cc: Miles Bader <uclinux-v850@xxxxxxxxxxxxx>
Cc: Chris Zankel <chris@xxxxxxxxxx>
Cc: "Luck, Tony" <tony.luck@xxxxxxxxx>
Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Cc: Roman Zippel <zippel@xxxxxxxxxxxxxx>
Cc: Greg Ungerer <gerg@xxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
include/linux/init.h | 5 +++--
init/main.c | 29 ++++++++++++++++++++++++-----
2 files changed, 27 insertions(+), 7 deletions(-)
diff -puN include/linux/init.h~dynamic-kernel-command-line-common include/linux/init.h
--- a/include/linux/init.h~dynamic-kernel-command-line-common
+++ a/include/linux/init.h
@@ -67,7 +67,8 @@ extern initcall_t __con_initcall_start[]
extern initcall_t __security_initcall_start[], __security_initcall_end[];
/* Defined in init/main.c */
-extern char saved_command_line[];
+extern char __initdata boot_command_line[];
+extern char *saved_command_line;
extern unsigned int reset_devices;
/* used by init/main.c */
@@ -164,7 +165,7 @@ struct obs_kernel_param {
#define early_param(str, fn) \
__setup_param(str, fn, fn, 1)
-/* Relies on saved_command_line being set */
+/* Relies on boot_command_line being set */
void __init parse_early_param(void);
#endif /* __ASSEMBLY__ */
diff -puN init/main.c~dynamic-kernel-command-line-common init/main.c
--- a/init/main.c~dynamic-kernel-command-line-common
+++ a/init/main.c
@@ -121,8 +121,12 @@ extern void time_init(void);
void (*late_time_init)(void);
extern void softirq_init(void);
-/* Untouched command line (eg. for /proc) saved by arch-specific code. */
-char saved_command_line[COMMAND_LINE_SIZE];
+/* Untouched command line saved by arch-specific code. */
+char __initdata boot_command_line[COMMAND_LINE_SIZE];
+/* Untouched saved command line (eg. for /proc) */
+char *saved_command_line;
+/* Command line for parameter parsing */
+static char *static_command_line;
static char *execute_command;
static char *ramdisk_execute_command;
@@ -400,6 +404,20 @@ static void __init smp_init(void)
#endif
/*
+ * We need to store the untouched command line for future reference.
+ * We also need to store the touched command line since the parameter
+ * parsing is performed in place, and we should allow a component to
+ * store reference of name/value for future reference.
+ */
+static void __init setup_command_line(char *command_line)
+{
+ saved_command_line = alloc_bootmem(strlen (boot_command_line)+1);
+ static_command_line = alloc_bootmem(strlen (command_line)+1);
+ strcpy (saved_command_line, boot_command_line);
+ strcpy (static_command_line, command_line);
+}
+
+/*
* We need to finalize in a non-__init function or else race conditions
* between the root thread and the init thread may cause start_kernel to
* be reaped by free_initmem before the root thread has proceeded to
@@ -453,7 +471,7 @@ void __init parse_early_param(void)
return;
/* All fall through to do_early_param. */
- strlcpy(tmp_cmdline, saved_command_line, COMMAND_LINE_SIZE);
+ strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
parse_args("early options", tmp_cmdline, NULL, 0, do_early_param);
done = 1;
}
@@ -503,6 +521,7 @@ asmlinkage void __init start_kernel(void
printk(KERN_NOTICE);
printk(linux_banner);
setup_arch(&command_line);
+ setup_command_line(command_line);
unwind_setup();
setup_per_cpu_areas();
smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */
@@ -520,9 +539,9 @@ asmlinkage void __init start_kernel(void
preempt_disable();
build_all_zonelists();
page_alloc_init();
- printk(KERN_NOTICE "Kernel command line: %s\n", saved_command_line);
+ printk(KERN_NOTICE "Kernel command line: %s\n", boot_command_line);
parse_early_param();
- parse_args("Booting kernel", command_line, __start___param,
+ parse_args("Booting kernel", static_command_line, __start___param,
__stop___param - __start___param,
&unknown_bootoption);
if (!irqs_disabled()) {
_
Patches currently in -mm which might be from alon.barlev@xxxxxxxxx are
origin.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
