The patch titled
atmel_serial: Use __raw I/O register access
has been removed from the -mm tree. Its filename was
atmel_serial-use-__raw-i-o-register-access.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: atmel_serial: Use __raw I/O register access
From: Haavard Skinnemoen <hskinnemoen@xxxxxxxxx>
Access to chip-internal registers should always be native-endian. This is
especially important for AVR32 since it's a big-endian architecture and the
non-raw readl() and writel() macros are defined to do little-endian
accesses.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@xxxxxxxxx>
Acked-by: Andrew Victor <andrew@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/serial/atmel_serial.c | 50 ++++++++++++++++----------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff -puN drivers/serial/atmel_serial.c~atmel_serial-use-__raw-i-o-register-access drivers/serial/atmel_serial.c
--- a/drivers/serial/atmel_serial.c~atmel_serial-use-__raw-i-o-register-access
+++ a/drivers/serial/atmel_serial.c
@@ -73,35 +73,35 @@
#define ATMEL_ISR_PASS_LIMIT 256
-#define UART_PUT_CR(port,v) writel(v, (port)->membase + ATMEL_US_CR)
-#define UART_GET_MR(port) readl((port)->membase + ATMEL_US_MR)
-#define UART_PUT_MR(port,v) writel(v, (port)->membase + ATMEL_US_MR)
-#define UART_PUT_IER(port,v) writel(v, (port)->membase + ATMEL_US_IER)
-#define UART_PUT_IDR(port,v) writel(v, (port)->membase + ATMEL_US_IDR)
-#define UART_GET_IMR(port) readl((port)->membase + ATMEL_US_IMR)
-#define UART_GET_CSR(port) readl((port)->membase + ATMEL_US_CSR)
-#define UART_GET_CHAR(port) readl((port)->membase + ATMEL_US_RHR)
-#define UART_PUT_CHAR(port,v) writel(v, (port)->membase + ATMEL_US_THR)
-#define UART_GET_BRGR(port) readl((port)->membase + ATMEL_US_BRGR)
-#define UART_PUT_BRGR(port,v) writel(v, (port)->membase + ATMEL_US_BRGR)
-#define UART_PUT_RTOR(port,v) writel(v, (port)->membase + ATMEL_US_RTOR)
+#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
+#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
+#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
+#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER)
+#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR)
+#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR)
+#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR)
+#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR)
+#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR)
+#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
+#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
+#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
-// #define UART_GET_CR(port) readl((port)->membase + ATMEL_US_CR) // is write-only
+// #define UART_GET_CR(port) __raw_readl((port)->membase + ATMEL_US_CR) // is write-only
/* PDC registers */
-#define UART_PUT_PTCR(port,v) writel(v, (port)->membase + ATMEL_PDC_PTCR)
-#define UART_GET_PTSR(port) readl((port)->membase + ATMEL_PDC_PTSR)
+#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
-#define UART_PUT_RPR(port,v) writel(v, (port)->membase + ATMEL_PDC_RPR)
-#define UART_GET_RPR(port) readl((port)->membase + ATMEL_PDC_RPR)
-#define UART_PUT_RCR(port,v) writel(v, (port)->membase + ATMEL_PDC_RCR)
-#define UART_PUT_RNPR(port,v) writel(v, (port)->membase + ATMEL_PDC_RNPR)
-#define UART_PUT_RNCR(port,v) writel(v, (port)->membase + ATMEL_PDC_RNCR)
-
-#define UART_PUT_TPR(port,v) writel(v, (port)->membase + ATMEL_PDC_TPR)
-#define UART_PUT_TCR(port,v) writel(v, (port)->membase + ATMEL_PDC_TCR)
-//#define UART_PUT_TNPR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNPR)
-//#define UART_PUT_TNCR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNCR)
+#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
+#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR)
+#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
+#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
+#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
+
+#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
+#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+//#define UART_PUT_TNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
+//#define UART_PUT_TNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
static int (*atmel_open_hook)(struct uart_port *);
static void (*atmel_close_hook)(struct uart_port *);
_
Patches currently in -mm which might be from hskinnemoen@xxxxxxxxx are
origin.patch
git-arm.patch
git-avr32.patch
git-mtd.patch
clocksource-fixup-is_continous-changes-on-avr32.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
