The patch titled
Char: moxa, do not initialize global static
has been removed from the -mm tree. Its filename was
char-moxa-do-not-initialize-global-static.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: Char: moxa, do not initialize global static
From: Jiri Slaby <jirislaby@xxxxxxxxx>
Remove useless initialization of variables a) statically b) dynamically at
module_init c) dynamically after kzalloc (those with '= 0/NULL')
Signed-off-by: Jiri Slaby <jirislaby@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/char/moxa.c | 24 ++++--------------------
1 file changed, 4 insertions(+), 20 deletions(-)
diff -puN drivers/char/moxa.c~char-moxa-do-not-initialize-global-static drivers/char/moxa.c
--- a/drivers/char/moxa.c~char-moxa-do-not-initialize-global-static
+++ a/drivers/char/moxa.c
@@ -194,9 +194,9 @@ static int verbose = 0;
static int ttymajor = MOXAMAJOR;
/* Variables for insmod */
#ifdef MODULE
-static int baseaddr[] = {0, 0, 0, 0};
-static int type[] = {0, 0, 0, 0};
-static int numports[] = {0, 0, 0, 0};
+static int baseaddr[4];
+static int type[4];
+static int numports[4];
#endif
MODULE_AUTHOR("William Chen");
@@ -348,10 +348,7 @@ static int __init moxa_init(void)
moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
moxaDriver->subtype = SERIAL_TYPE_NORMAL;
moxaDriver->init_termios = tty_std_termios;
- moxaDriver->init_termios.c_iflag = 0;
- moxaDriver->init_termios.c_oflag = 0;
moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
- moxaDriver->init_termios.c_lflag = 0;
moxaDriver->init_termios.c_ispeed = 9600;
moxaDriver->init_termios.c_ospeed = 9600;
moxaDriver->flags = TTY_DRIVER_REAL_RAW;
@@ -361,25 +358,13 @@ static int __init moxa_init(void)
ch->type = PORT_16550A;
ch->port = i;
INIT_WORK(&ch->tqueue, do_moxa_softint);
- ch->tty = NULL;
ch->close_delay = 5 * HZ / 10;
ch->closing_wait = 30 * HZ;
- ch->count = 0;
- ch->blocked_open = 0;
ch->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
init_waitqueue_head(&ch->open_wait);
init_waitqueue_head(&ch->close_wait);
}
- for (i = 0; i < MAX_BOARDS; i++) {
- moxa_boards[i].boardType = 0;
- moxa_boards[i].numPorts = 0;
- moxa_boards[i].baseAddr = 0;
- moxa_boards[i].busType = 0;
- moxa_boards[i].pciInfo.busNum = 0;
- moxa_boards[i].pciInfo.devNum = 0;
- }
- MoxaDriverInit();
printk("Tty devices major number = %d\n", ttymajor);
if (tty_register_driver(moxaDriver)) {
@@ -391,7 +376,6 @@ static int __init moxa_init(void)
init_timer(&moxaEmptyTimer[i]);
moxaEmptyTimer[i].function = check_xmit_empty;
moxaEmptyTimer[i].data = (unsigned long) & moxaChannels[i];
- moxaEmptyTimer_on[i] = 0;
}
init_timer(&moxaTimer);
@@ -1470,7 +1454,7 @@ static char moxaLowChkFlag[MAX_PORTS];
static int moxaLowWaterChk;
static int moxaCard;
static mon_st moxaLog;
-static int moxaFuncTout;
+static int moxaFuncTout = HZ / 2;
static ushort moxaBreakCnt[MAX_PORTS];
static void moxadelay(int);
_
Patches currently in -mm which might be from jirislaby@xxxxxxxxx are
origin.patch
char-use-more-pci_device-macro.patch
char-cyclades-use-pci_device_id.patch
maintainers-remove-two-dead-e-mail.patch
char-specialix-isr-have-2-params.patch
char-timers-cleanup.patch
fbdev-driver-for-s3-trio-virge-update-2-fix.patch
video-fb-add-true-ref_count-atomicity.patch
video-fb-kzalloc-changes.patch
shrink_slab-handle-bad-shrinkers.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
