The patch titled
sata_nv: wait for response on entering/leaving ADMA mode
has been added to the -mm tree. Its filename is
sata_nv-wait-for-response-on-entering-leaving-adma-mode.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: sata_nv: wait for response on entering/leaving ADMA mode
From: Robert Hancock <hancockr@xxxxxxx>
Update sata_nv to wait for the controller to indicate via the status
register that it has entered the requested state when switching between
ADMA mode and register mode. This issue came up recently when debugging
some problems with cache flush command timeouts and while it didn't appear
to fix that problem, this is something we should likely be doing in any
case.
Signed-off-by: Robert Hancock <hancockr@xxxxxxx>
Cc: Tejun Heo <htejun@xxxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/sata_nv.c | 41 ++++++++++++++++++++++++++++++++++++++--
1 files changed, 39 insertions(+), 2 deletions(-)
diff -puN drivers/ata/sata_nv.c~sata_nv-wait-for-response-on-entering-leaving-adma-mode drivers/ata/sata_nv.c
--- a/drivers/ata/sata_nv.c~sata_nv-wait-for-response-on-entering-leaving-adma-mode
+++ a/drivers/ata/sata_nv.c
@@ -504,14 +504,38 @@ static void nv_adma_register_mode(struct
{
struct nv_adma_port_priv *pp = ap->private_data;
void __iomem *mmio = pp->ctl_block;
- u16 tmp;
+ u16 tmp, status;
+ int count = 0;
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
return;
+ status = readw(mmio + NV_ADMA_STAT);
+ while(!(status & NV_ADMA_STAT_IDLE) && count < 20) {
+ ndelay(50);
+ status = readw(mmio + NV_ADMA_STAT);
+ count++;
+ }
+ if(count == 20)
+ ata_port_printk(ap, KERN_WARNING,
+ "timeout waiting for ADMA IDLE, stat=0x%hx\n",
+ status);
+
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+ count = 0;
+ status = readw(mmio + NV_ADMA_STAT);
+ while(!(status & NV_ADMA_STAT_LEGACY) && count < 20) {
+ ndelay(50);
+ status = readw(mmio + NV_ADMA_STAT);
+ count++;
+ }
+ if(count == 20)
+ ata_port_printk(ap, KERN_WARNING,
+ "timeout waiting for ADMA LEGACY, stat=0x%hx\n",
+ status);
+
pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
}
@@ -519,7 +543,8 @@ static void nv_adma_mode(struct ata_port
{
struct nv_adma_port_priv *pp = ap->private_data;
void __iomem *mmio = pp->ctl_block;
- u16 tmp;
+ u16 tmp, status;
+ int count = 0;
if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
return;
@@ -529,6 +554,18 @@ static void nv_adma_mode(struct ata_port
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+ status = readw(mmio + NV_ADMA_STAT);
+ while(((status & NV_ADMA_STAT_LEGACY) ||
+ !(status & NV_ADMA_STAT_IDLE)) && count < 20) {
+ ndelay(50);
+ status = readw(mmio + NV_ADMA_STAT);
+ count++;
+ }
+ if(count == 20)
+ ata_port_printk(ap, KERN_WARNING,
+ "timeout waiting for ADMA LEGACY clear and IDLE, stat=0x%hx\n",
+ status);
+
pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
}
_
Patches currently in -mm which might be from hancockr@xxxxxxx are
git-libata-all.patch
sata_nv-cleanup-adma-error-handling-v2.patch
sata_nv-use-adma-for-nodata-commands.patch
sata_nv-wait-for-response-on-entering-leaving-adma-mode.patch
sata_nv-propagate-ata_pci_device_do_resume-return-value.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
