The patch titled
e1000: update new hardware init layer code with bugfixes
has been added to the -mm tree. Its filename is
e1000-update-new-hardware-init-layer-code-with-bugfixes.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: e1000: update new hardware init layer code with bugfixes
From: Jeb Cramer <cramerj@xxxxxxxxx>
Replace hard coded RAR numbers with constant. Add several function
description and fix some small copy+paste errors in others. Fix link speed
detection on PCI adapters showing wrong PCI bus speed. Fix laa detection.
Rewrite tbi static for 82543. Fix mta list overflow. Don't unmap skb's
twice in occasions, but set dma=0. Flatten dhcp generic function for
readability. Change force phy speed duplex setup to be void and static.
Depends on git-e1000.patch as present in 2.6.20-rc4-mm1.
Signed-off-by: Jesse Brandeburg <jbrandeb@xxxxxxxxx>
Signed-off-by: Jeb Cramer <cramerj@xxxxxxxxx>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
Signed-off-by: Auke Kok <auke-jan.h.kok@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/net/e1000/e1000_80003es2lan.c | 90 +++++++++++++++++-------
drivers/net/e1000/e1000_82540.c | 86 +++++++++++++++++++++-
drivers/net/e1000/e1000_82541.c | 6 -
drivers/net/e1000/e1000_82542.c | 6 -
drivers/net/e1000/e1000_82543.c | 44 ++++++-----
drivers/net/e1000/e1000_82571.c | 19 +----
drivers/net/e1000/e1000_api.h | 1
drivers/net/e1000/e1000_defines.h | 8 ++
drivers/net/e1000/e1000_ich8lan.c | 21 +++--
drivers/net/e1000/e1000_ich8lan.h | 2
drivers/net/e1000/e1000_mac.c | 5 +
drivers/net/e1000/e1000_main.c | 31 +++++---
drivers/net/e1000/e1000_manage.c | 39 +++++-----
drivers/net/e1000/e1000_nvm.c | 3
drivers/net/e1000/e1000_osdep.h | 2
drivers/net/e1000/e1000_phy.c | 58 +++++++--------
drivers/net/e1000/e1000_phy.h | 64 ++++++++---------
17 files changed, 316 insertions(+), 169 deletions(-)
diff -puN drivers/net/e1000/e1000_80003es2lan.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_80003es2lan.c
--- a/drivers/net/e1000/e1000_80003es2lan.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_80003es2lan.c
@@ -131,7 +131,7 @@ out:
}
/**
- * e1000_init_phy_params_80003es2lan - Init ESB2 NVM func ptrs.
+ * e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs.
* @hw - pointer to the HW structure
*
* This is a function pointer entry point called by the api module.
@@ -187,7 +187,7 @@ e1000_init_nvm_params_80003es2lan(struct
}
/**
- * e1000_init_phy_params_80003es2lan - Init ESB2 MAC func ptrs.
+ * e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
* @hw - pointer to the HW structure
*
* This is a function pointer entry point called by the api module.
@@ -214,7 +214,7 @@ e1000_init_mac_params_80003es2lan(struct
/* Set mta register count */
mac->mta_reg_count = 128;
/* Set rar entry count */
- mac->rar_entry_count = 16;
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Set if part includes ASF firmware */
mac->asf_firmware_present = TRUE;
/* Set if manageability features are enabled. */
@@ -535,29 +535,48 @@ e1000_read_phy_reg_gg82563_80003es2lan(s
u16 *data)
{
s32 ret_val;
+ u32 page_select;
+ u16 temp;
DEBUGFUNC("e1000_read_phy_reg_gg82563_80003es2lan");
/* Select Configuration Page */
- if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
- ret_val = e1000_write_phy_reg_m88(hw, GG82563_PHY_PAGE_SELECT,
- (u16)((u16)offset >> GG82563_PAGE_SHIFT));
- } else {
+ if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
+ page_select = GG82563_PHY_PAGE_SELECT;
+ else {
/* Use Alternative Page Select register to access
* registers 30 and 31
*/
- ret_val = e1000_write_phy_reg_m88(hw,
- GG82563_PHY_PAGE_SELECT_ALT,
- (u16)((u16)offset >> GG82563_PAGE_SHIFT));
+ page_select = GG82563_PHY_PAGE_SELECT_ALT;
}
+ temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
+ ret_val = e1000_write_phy_reg_m88(hw, page_select, temp);
if (ret_val)
goto out;
+ /* The "ready" bit in the MDIC register may be incorrectly set
+ * before the device has completed the "Page Select" MDI
+ * transaction. So we wait 200us after each MDI command...
+ */
+ udelay(200);
+
+ /* ...and verify the command was successful. */
+ ret_val = e1000_read_phy_reg_m88(hw, page_select, &temp);
+
+ if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ udelay(200);
+
ret_val = e1000_read_phy_reg_m88(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
+ udelay(200);
+
out:
return ret_val;
}
@@ -576,29 +595,48 @@ e1000_write_phy_reg_gg82563_80003es2lan(
u16 data)
{
s32 ret_val;
+ u32 page_select;
+ u16 temp;
DEBUGFUNC("e1000_write_phy_reg_gg82563_80003es2lan");
/* Select Configuration Page */
- if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
- ret_val = e1000_write_phy_reg_m88(hw, GG82563_PHY_PAGE_SELECT,
- (u16)((u16)offset >> GG82563_PAGE_SHIFT));
- } else {
+ if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
+ page_select = GG82563_PHY_PAGE_SELECT;
+ else {
/* Use Alternative Page Select register to access
* registers 30 and 31
*/
- ret_val = e1000_write_phy_reg_m88(hw,
- GG82563_PHY_PAGE_SELECT_ALT,
- (u16)((u16)offset >> GG82563_PAGE_SHIFT));
+ page_select = GG82563_PHY_PAGE_SELECT_ALT;
}
+ temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
+ ret_val = e1000_write_phy_reg_m88(hw, page_select, temp);
if (ret_val)
goto out;
+ /* The "ready" bit in the MDIC register may be incorrectly set
+ * before the device has completed the "Page Select" MDI
+ * transaction. So we wait 200us after each MDI command...
+ */
+ udelay(200);
+
+ /* ...and verify the command was successful. */
+ ret_val = e1000_read_phy_reg_m88(hw, page_select, &temp);
+
+ if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ udelay(200);
+
ret_val = e1000_write_phy_reg_m88(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
+ udelay(200);
+
out:
return ret_val;
}
@@ -673,10 +711,6 @@ e1000_phy_force_speed_duplex_80003es2lan
DEBUGFUNC("e1000_phy_force_speed_duplex_80003es2lan");
- ret_val = e1000_phy_force_speed_duplex_setup(hw);
- if (ret_val)
- goto out;
-
/* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
* forced whenever speed and duplex are forced.
*/
@@ -691,8 +725,16 @@ e1000_phy_force_speed_duplex_80003es2lan
DEBUGOUT1("GG82563 PSCR: %X\n", phy_data);
+ ret_val = e1000_read_phy_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ e1000_phy_force_speed_duplex_setup(hw, &phy_data);
+
/* Reset the phy to commit changes. */
- ret_val = e1000_phy_commit(hw);
+ phy_data |= MII_CR_RESET;
+
+ ret_val = e1000_write_phy_reg(hw, PHY_CONTROL, phy_data);
if (ret_val)
goto out;
@@ -892,9 +934,7 @@ e1000_init_hw_80003es2lan(struct e1000_h
DEBUGOUT("Initializing the IEEE VLAN\n");
e1000_clear_vfta(hw);
- /* Setup the receive address. This involves initializing all of the
- * Receive Address Registers (RARs 0 - 15).
- */
+ /* Setup the receive address. */
e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
/* Zero out the Multicast HASH table */
diff -puN drivers/net/e1000/e1000_82540.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_82540.c
--- a/drivers/net/e1000/e1000_82540.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_82540.c
@@ -49,6 +49,12 @@ static s32 e1000_set_vco_speed_82540(st
static s32 e1000_setup_copper_link_82540(struct e1000_hw *hw);
static s32 e1000_setup_fiber_serdes_link_82540(struct e1000_hw *hw);
+/**
+ * e1000_init_phy_params_82540 - Init PHY func ptrs.
+ * @hw - pointer to the HW structure
+ *
+ * This is a function pointer entry point called by the api module.
+ **/
static s32
e1000_init_phy_params_82540(struct e1000_hw *hw)
{
@@ -96,6 +102,12 @@ out:
return ret_val;
}
+/**
+ * e1000_init_nvm_params_82540 - Init NVM func ptrs.
+ * @hw - pointer to the HW structure
+ *
+ * This is a function pointer entry point called by the api module.
+ **/
static s32
e1000_init_nvm_params_82540(struct e1000_hw *hw)
{
@@ -135,6 +147,12 @@ e1000_init_nvm_params_82540(struct e1000
return E1000_SUCCESS;
}
+/**
+ * e1000_init_mac_params_82540 - Init MAC func ptrs.
+ * @hw - pointer to the HW structure
+ *
+ * This is a function pointer entry point called by the api module.
+ **/
static s32
e1000_init_mac_params_82540(struct e1000_hw *hw)
{
@@ -164,7 +182,7 @@ e1000_init_mac_params_82540(struct e1000
/* Set mta register count */
mac->mta_reg_count = 128;
/* Set rar entry count */
- mac->rar_entry_count = 16;
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Function pointers */
@@ -224,6 +242,13 @@ out:
return ret_val;
}
+/**
+ * e1000_init_function_pointers_82540 - Init func ptrs.
+ * @hw - pointer to the HW structure
+ *
+ * The only function explicitly called by the api module to initialize
+ * all function pointers and parameters.
+ **/
void
e1000_init_function_pointers_82540(struct e1000_hw *hw)
{
@@ -234,6 +259,13 @@ e1000_init_function_pointers_82540(struc
hw->func.init_phy_params = e1000_init_phy_params_82540;
}
+/**
+ * e1000_reset_hw_82540 - Reset hardware
+ * @hw - pointer to the HW structure
+ *
+ * This resets the hardware into a known state. This is a
+ * function pointer entry point called by the api module.
+ **/
static s32
e1000_reset_hw_82540(struct e1000_hw *hw)
{
@@ -285,6 +317,13 @@ e1000_reset_hw_82540(struct e1000_hw *hw
return ret_val;
}
+/**
+ * e1000_init_hw_82540 - Initialize hardware
+ * @hw - pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation. This is a
+ * function pointer entry point called by the api module.
+ **/
static s32
e1000_init_hw_82540(struct e1000_hw *hw)
{
@@ -309,9 +348,7 @@ e1000_init_hw_82540(struct e1000_hw *hw)
}
e1000_clear_vfta(hw);
- /* Setup the receive address. This involves initializing all of the
- * Receive Address Registers (RARs 0 - 15).
- */
+ /* Setup the receive address. */
e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
/* Zero out the Multicast HASH table */
@@ -359,6 +396,16 @@ out:
return ret_val;
}
+/**
+ * e1000_setup_copper_link_82540 - Configure copper link settings
+ * @hw - pointer to the HW structure
+ *
+ * Calls the appropriate function to configure the link for auto-neg or forced
+ * speed and duplex. Then we check for link, once link is established calls
+ * to configure collision distance and flow control are called. If link is
+ * not established, we return -E1000_ERR_PHY (-2). This is a function
+ * pointer entry point called by the api module.
+ **/
static s32
e1000_setup_copper_link_82540(struct e1000_hw *hw)
{
@@ -398,6 +445,16 @@ out:
return ret_val;
}
+/**
+ * e1000_setup_fiber_serdes_link_82540 - Setup link for fiber/serdes
+ * @hw - pointer to the HW structure
+ *
+ * Set the output amplitude to the value in the EEPROM and adjust the VCO
+ * speed to improve Bit Error Rate (BER) performance. Configures collision
+ * distance and flow control for fiber and serdes links. Upon successful
+ * setup, poll for link. This is a function pointer entry point called by
+ * the api module.
+ **/
static s32
e1000_setup_fiber_serdes_link_82540(struct e1000_hw *hw)
{
@@ -431,6 +488,12 @@ out:
return ret_val;
}
+/**
+ * e1000_adjust_serdes_amplitude_82540 - Adjust amplitude based on EEPROM
+ * @hw - pointer to the HW structure
+ *
+ * Adjust the SERDES ouput amplitude based on the EEPROM settings.
+ **/
static s32
e1000_adjust_serdes_amplitude_82540(struct e1000_hw *hw)
{
@@ -458,6 +521,12 @@ out:
return ret_val;
}
+/**
+ * e1000_set_vco_speed_82540 - Set VCO speed for better performance
+ * @hw - pointer to the HW structure
+ *
+ * Set the VCO speed to improve Bit Error Rate (BER) performance.
+ **/
static s32
e1000_set_vco_speed_82540(struct e1000_hw *hw)
{
@@ -510,6 +579,15 @@ out:
return ret_val;
}
+/**
+ * e1000_set_phy_mode_82540 - Set PHY to class A mode
+ * @hw - pointer to the HW structure
+ *
+ * Sets the PHY to class A mode and assumes the following operations will
+ * follow to enable the new class mode:
+ * 1. Do a PHY soft reset.
+ * 2. Restart auto-negotiation or force link.
+ **/
static s32
e1000_set_phy_mode_82540(struct e1000_hw *hw)
{
diff -puN drivers/net/e1000/e1000_82541.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_82541.c
--- a/drivers/net/e1000/e1000_82541.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_82541.c
@@ -222,7 +222,7 @@ e1000_init_mac_params_82541(struct e1000
/* Set mta register count */
mac->mta_reg_count = 128;
/* Set rar entry count */
- mac->rar_entry_count = 16;
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Set if part includes ASF firmware */
mac->asf_firmware_present = TRUE;
@@ -370,9 +370,7 @@ e1000_init_hw_82541(struct e1000_hw *hw)
DEBUGOUT("Initializing the IEEE VLAN\n");
e1000_clear_vfta(hw);
- /* Setup the receive address. This involves initializing
- * all of the Receive Address Registers (RARs 0 - 15);
- */
+ /* Setup the receive address. */
e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
/* Zero out the Multicast HASH table */
diff -puN drivers/net/e1000/e1000_82542.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_82542.c
--- a/drivers/net/e1000/e1000_82542.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_82542.c
@@ -100,7 +100,7 @@ e1000_init_mac_params_82542(struct e1000
/* Set mta register count */
mac->mta_reg_count = 128;
/* Set rar entry count */
- mac->rar_entry_count = 16;
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Function pointers */
@@ -235,9 +235,7 @@ e1000_init_hw_82542(struct e1000_hw *hw)
msleep(5);
}
- /* Setup the receive address. This involves initializing all of the
- * Receive Address Registers (RARs 0 - 15).
- */
+ /* Setup the receive address. */
e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
/* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
diff -puN drivers/net/e1000/e1000_82543.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_82543.c
--- a/drivers/net/e1000/e1000_82543.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_82543.c
@@ -64,6 +64,7 @@ static void e1000_raise_mdi_clk_825
static u16 e1000_shift_in_mdi_bits_82543(struct e1000_hw *hw);
static void e1000_shift_out_mdi_bits_82543(struct e1000_hw *hw, u32 data,
u16 count);
+static boolean_t e1000_tbi_compatibility_enabled_82543(struct e1000_hw *hw);
static void e1000_set_tbi_sbp_82543(struct e1000_hw *hw, boolean_t state);
struct e1000_dev_spec_82543 {
@@ -196,7 +197,7 @@ e1000_init_mac_params_82543(struct e1000
/* Set mta register count */
mac->mta_reg_count = 128;
/* Set rar entry count */
- mac->rar_entry_count = 16;
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Function pointers */
@@ -265,7 +266,7 @@ e1000_init_function_pointers_82543(struc
hw->func.init_phy_params = e1000_init_phy_params_82543;
}
-boolean_t
+static boolean_t
e1000_tbi_compatibility_enabled_82543(struct e1000_hw *hw)
{
struct e1000_dev_spec_82543 *dev_spec;
@@ -869,9 +870,7 @@ e1000_init_hw_82543(struct e1000_hw *hw)
E1000_WRITE_REG(hw, VET, 0);
e1000_clear_vfta(hw);
- /* Setup the receive address. This involves initializing all of the
- * Receive Address Registers (RARs 0 - 15).
- */
+ /* Setup the receive address. */
e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
/* Zero out the Multicast HASH table */
@@ -1286,41 +1285,46 @@ out:
static void
e1000_write_vfta_82543(struct e1000_hw *hw, u32 offset, u32 value)
{
- u32 vfta;
+ u32 temp;
DEBUGFUNC("e1000_write_vfta_82543");
- vfta = E1000_READ_REG_ARRAY(hw, VFTA, offset - 1);
-
- e1000_write_vfta_generic(hw, offset, value);
-
if ((hw->mac.type == e1000_82544) && (offset & 1)) {
- E1000_WRITE_REG_ARRAY(hw, VFTA, offset - 1, vfta);
+ temp = E1000_READ_REG_ARRAY(hw, VFTA, offset - 1);
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
E1000_WRITE_FLUSH(hw);
- }
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset - 1, temp);
+ E1000_WRITE_FLUSH(hw);
+ } else
+ e1000_write_vfta_generic(hw, offset, value);
}
static void
e1000_mta_set_82543(struct e1000_hw *hw, u32 hash_value)
{
- u32 hash_reg, mta;
+ u32 hash_bit, hash_reg, mta, temp;
DEBUGFUNC("e1000_mta_set_82543");
- hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
-
- mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg - 1);
-
- e1000_mta_set_generic(hw, hash_value);
+ hash_reg = (hash_value >> 5);
/* If we are on an 82544 and we are trying to write an odd offset
* in the MTA, save off the previous entry before writing and
* restore the old value after writing.
*/
if ((hw->mac.type == e1000_82544) && (hash_reg & 1)) {
- E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg - 1, mta);
+ hash_reg &= (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+ mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg);
+ mta |= (1 << hash_bit);
+ temp = E1000_READ_REG_ARRAY(hw, MTA, hash_reg - 1);
+
+ E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
E1000_WRITE_FLUSH(hw);
- }
+ E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg - 1, temp);
+ E1000_WRITE_FLUSH(hw);
+ } else
+ e1000_mta_set_generic(hw, hash_value);
}
static s32
diff -puN drivers/net/e1000/e1000_82571.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_82571.c
--- a/drivers/net/e1000/e1000_82571.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_82571.c
@@ -243,7 +243,7 @@ e1000_init_mac_params_82571(struct e1000
/* Set mta register count */
mac->mta_reg_count = 128;
/* Set rar entry count */
- mac->rar_entry_count = 16;
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Set if part includes ASF firmware */
mac->asf_firmware_present = TRUE;
/* Set if manageability features are enabled. */
@@ -700,7 +700,6 @@ static s32
e1000_init_hw_82571(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
- struct e1000_dev_spec_82571 *dev_spec;
u32 reg_data;
s32 ret_val;
u16 i, rar_count = mac->rar_entry_count;
@@ -709,8 +708,6 @@ e1000_init_hw_82571(struct e1000_hw *hw)
e1000_initialize_hw_bits_82571(hw);
- dev_spec = (struct e1000_dev_spec_82571 *)hw->dev_spec;
-
/* Initialize identification LED */
ret_val = e1000_id_led_init_generic(hw);
if (ret_val) {
@@ -722,14 +719,12 @@ e1000_init_hw_82571(struct e1000_hw *hw)
DEBUGOUT("Initializing the IEEE VLAN\n");
e1000_clear_vfta(hw);
- /* Setup the receive address. This involves initializing all of the
- * Receive Address Registers (RARs 0 - 15).
- */
+ /* Setup the receive address. */
/* If, however, a locally administered address was assigned to the
* 82571, we must reserve a RAR for it to work around an issue where
* resetting one port will reload the MAC on the other port.
*/
- if (dev_spec->laa_is_present)
+ if (e1000_get_laa_state_82571(hw) == TRUE)
rar_count--;
e1000_init_rx_addrs_generic(hw, rar_count);
@@ -744,16 +739,16 @@ e1000_init_hw_82571(struct e1000_hw *hw)
/* Set the transmit descriptor write-back policy */
reg_data = E1000_READ_REG(hw, TXDCTL);
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB |
- E1000_TXDCTL_COUNT_DESC;
+ E1000_TXDCTL_FULL_TX_DESC_WB |
+ E1000_TXDCTL_COUNT_DESC;
E1000_WRITE_REG(hw, TXDCTL, reg_data);
/* ...for both queues. */
if (mac->type != e1000_82573) {
reg_data = E1000_READ_REG(hw, TXDCTL1);
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB |
- E1000_TXDCTL_COUNT_DESC;
+ E1000_TXDCTL_FULL_TX_DESC_WB |
+ E1000_TXDCTL_COUNT_DESC;
E1000_WRITE_REG(hw, TXDCTL1, reg_data);
} else {
e1000_enable_tx_pkt_filtering(hw);
diff -puN drivers/net/e1000/e1000_api.h~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_api.h
--- a/drivers/net/e1000/e1000_api.h~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_api.h
@@ -97,7 +97,6 @@ void e1000_tbi_adjust_stats_82543(s
u32 frame_len, u8 *mac_addr);
void e1000_set_tbi_compatibility_82543(struct e1000_hw *hw,
boolean_t state);
-boolean_t e1000_tbi_compatibility_enabled_82543(struct e1000_hw *hw);
boolean_t e1000_tbi_sbp_enabled_82543(struct e1000_hw *hw);
#endif
#ifndef NO_82542_SUPPORT
diff -puN drivers/net/e1000/e1000_defines.h~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_defines.h
--- a/drivers/net/e1000/e1000_defines.h~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_defines.h
@@ -740,6 +740,7 @@
#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
still to be processed. */
@@ -753,6 +754,13 @@
#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
/* Receive Address */
+/* Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots. However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES 15
#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
/* Error Codes */
diff -puN drivers/net/e1000/e1000_ich8lan.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_ich8lan.c
--- a/drivers/net/e1000/e1000_ich8lan.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_ich8lan.c
@@ -292,10 +292,9 @@ e1000_init_mac_params_ich8lan(struct e10
/* Set mta register count */
mac->mta_reg_count = 32;
/* Set rar entry count */
+ mac->rar_entry_count = E1000_ICH_RAR_ENTRIES;
if (mac->type == e1000_ich8lan)
- mac->rar_entry_count = 6;
- else
- mac->rar_entry_count = 7;
+ mac->rar_entry_count--;
/* Set if part includes ASF firmware */
mac->asf_firmware_present = TRUE;
/* Set if manageability features are enabled. */
@@ -493,7 +492,13 @@ e1000_phy_force_speed_duplex_ich8lan(str
goto out;
}
- ret_val = e1000_phy_force_speed_duplex_setup(hw);
+ ret_val = e1000_read_phy_reg(hw, PHY_CONTROL, &data);
+ if (ret_val)
+ goto out;
+
+ e1000_phy_force_speed_duplex_setup(hw, &data);
+
+ ret_val = e1000_write_phy_reg(hw, PHY_CONTROL, data);
if (ret_val)
goto out;
@@ -1860,9 +1865,7 @@ e1000_init_hw_ich8lan(struct e1000_hw *h
goto out;
}
- /* Setup the receive address. This involves initializing all of the
- * Receive Address Registers (RARs 0 - 5).
- */
+ /* Setup the receive address. */
e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
/* Zero out the Multicast HASH table */
@@ -1877,10 +1880,14 @@ e1000_init_hw_ich8lan(struct e1000_hw *h
txdctl = E1000_READ_REG(hw, TXDCTL);
txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
E1000_TXDCTL_FULL_TX_DESC_WB;
+ txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
E1000_WRITE_REG(hw, TXDCTL, txdctl);
txdctl = E1000_READ_REG(hw, TXDCTL1);
txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
E1000_TXDCTL_FULL_TX_DESC_WB;
+ txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
E1000_WRITE_REG(hw, TXDCTL1, txdctl);
/* ICH8 has opposite polarity of no_snoop bits.
diff -puN drivers/net/e1000/e1000_ich8lan.h~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_ich8lan.h
--- a/drivers/net/e1000/e1000_ich8lan.h~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_ich8lan.h
@@ -83,6 +83,8 @@
#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
+#define E1000_ICH_RAR_ENTRIES 7
+
#define PHY_PAGE_SHIFT 5
#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
((reg) & MAX_PHY_REG_ADDRESS))
diff -puN drivers/net/e1000/e1000_mac.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_mac.c
--- a/drivers/net/e1000/e1000_mac.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_mac.c
@@ -76,10 +76,13 @@ e1000_get_bus_info_pci_generic(struct e1
switch (status & E1000_STATUS_PCIX_SPEED) {
case E1000_STATUS_PCIX_SPEED_66:
bus->speed = e1000_bus_speed_66;
+ break;
case E1000_STATUS_PCIX_SPEED_100:
bus->speed = e1000_bus_speed_100;
+ break;
case E1000_STATUS_PCIX_SPEED_133:
bus->speed = e1000_bus_speed_133;
+ break;
default:
bus->speed = e1000_bus_speed_reserved;
break;
@@ -207,7 +210,9 @@ e1000_init_rx_addrs_generic(struct e1000
DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count-1);
for (i = 1; i < rar_count; i++) {
E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_FLUSH(hw);
E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ E1000_WRITE_FLUSH(hw);
}
}
diff -puN drivers/net/e1000/e1000_main.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_main.c
--- a/drivers/net/e1000/e1000_main.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_main.c
@@ -35,7 +35,7 @@ static char e1000_driver_string[] = "Int
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "7.4.16-m2"DRIVERNAPI
+#define DRV_VERSION "7.4.19-m2"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2007 Intel Corporation.";
@@ -2254,12 +2254,14 @@ e1000_clean_rx_ring(struct e1000_adapter
/* Free all the Rx ring sk_buffs */
for (i = 0; i < rx_ring->count; i++) {
buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->skb) {
+ if (buffer_info->dma) {
pci_unmap_single(pdev,
buffer_info->dma,
buffer_info->length,
PCI_DMA_FROMDEVICE);
-
+ buffer_info->dma = 0;
+ }
+ if (buffer_info->skb) {
dev_kfree_skb(buffer_info->skb);
buffer_info->skb = NULL;
}
@@ -2429,7 +2431,7 @@ e1000_set_multi(struct net_device *netde
struct e1000_hw *hw = &adapter->hw;
struct e1000_mac_info *mac = &hw->mac;
struct dev_mc_list *mc_ptr;
- u8 mta_list[512]; /* Largest MTA size is 4096 bits */
+ u8 *mta_list;
u32 rctl;
int i;
@@ -2453,16 +2455,24 @@ e1000_set_multi(struct net_device *netde
if (hw->mac.type == e1000_82542)
e1000_enter_82542_rst(adapter);
+ mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC);
+ if (!mta_list)
+ return;
+
/* The shared function expects a packed array of only addresses. */
mc_ptr = netdev->mc_list;
- for (i = 0; mc_ptr; mc_ptr = mc_ptr->next) {
- memcpy(&mta_list[i*6], mc_ptr->dmi_addr, 6);
- i++;
+ for (i = 0; i < netdev->mc_count; i++) {
+ if (!mc_ptr)
+ break;
+ memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
+ mc_ptr = mc_ptr->next;
}
e1000_mc_addr_list_update(hw, mta_list, i, 1, mac->rar_entry_count);
+ kfree(mta_list);
+
if (hw->mac.type == e1000_82542)
e1000_leave_82542_rst(adapter);
}
@@ -3530,7 +3540,7 @@ e1000_change_mtu(struct net_device *netd
adapter->rx_buffer_len = E1000_RXBUFFER_16384;
/* adjust allocation if LPE protects us, and we aren't using SBP */
- if (!e1000_tbi_compatibility_enabled_82543(&adapter->hw) &&
+ if (!e1000_tbi_sbp_enabled_82543(&adapter->hw) &&
((max_frame == ETH_FRAME_LEN + ETHERNET_FCS_SIZE) ||
(max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
@@ -3882,7 +3892,7 @@ e1000_intr(int irq, void *data)
for (i = 0; i < E1000_MAX_INTR; i++)
if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
- !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+ e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
if (likely(adapter->itr_setting & 3))
@@ -4166,6 +4176,7 @@ e1000_clean_rx_irq(struct e1000_adapter
buffer_info->dma,
buffer_info->length,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
length = le16_to_cpu(rx_desc->length);
@@ -4333,6 +4344,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapt
pci_unmap_single(pdev, buffer_info->dma,
buffer_info->length,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
if (unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
E1000_DBG("%s: Packet Split buffers didn't pick up"
@@ -4548,6 +4560,7 @@ map_skb:
pci_unmap_single(pdev, buffer_info->dma,
adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
break; /* while !buffer_info->skb */
}
diff -puN drivers/net/e1000/e1000_manage.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_manage.c
--- a/drivers/net/e1000/e1000_manage.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_manage.c
@@ -208,23 +208,27 @@ e1000_mng_write_dhcp_info_generic(struct
hdr.reserved2 = 0;
hdr.checksum = 0;
+ /* Enable the host interface */
ret_val = e1000_mng_enable_host_if(hw);
- if (ret_val == E1000_SUCCESS) {
- ret_val = e1000_mng_host_if_write(hw,
- buffer,
- length,
- sizeof(hdr),
- &(hdr.checksum));
- if (ret_val == E1000_SUCCESS) {
- ret_val = e1000_mng_write_cmd_header(hw, &hdr);
- if (ret_val == E1000_SUCCESS) {
- /* Tell the ARC a new command is pending. */
- hicr = E1000_READ_REG(hw, HICR);
- E1000_WRITE_REG(hw, HICR, hicr | E1000_HICR_C);
- }
- }
- }
+ if (ret_val)
+ goto out;
+
+ /* Populate the host interface with the contents of "buffer". */
+ ret_val = e1000_mng_host_if_write(hw, buffer, length,
+ sizeof(hdr), &(hdr.checksum));
+ if (ret_val)
+ goto out;
+ /* Write the manageability command header */
+ ret_val = e1000_mng_write_cmd_header(hw, &hdr);
+ if (ret_val)
+ goto out;
+
+ /* Tell the ARC a new command is pending. */
+ hicr = E1000_READ_REG(hw, HICR);
+ E1000_WRITE_REG(hw, HICR, hicr | E1000_HICR_C);
+
+out:
return ret_val;
}
@@ -252,10 +256,7 @@ e1000_mng_write_cmd_header_generic(struc
length >>= 2;
/* Write the relevant command block into the ram area. */
for (i = 0; i < length; i++) {
- E1000_WRITE_REG_ARRAY_DWORD(hw,
- HOST_IF,
- i,
- *((u32 *) hdr + i));
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *) hdr + i));
E1000_WRITE_FLUSH(hw);
}
diff -puN drivers/net/e1000/e1000_nvm.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_nvm.c
--- a/drivers/net/e1000/e1000_nvm.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_nvm.c
@@ -518,8 +518,7 @@ e1000_read_nvm_eerd(struct e1000_hw *hw,
if (ret_val)
break;
- data[i] = (E1000_READ_REG(hw, EERD) >>
- E1000_NVM_RW_REG_DATA);
+ data[i] = (E1000_READ_REG(hw, EERD) >> E1000_NVM_RW_REG_DATA);
}
out:
diff -puN drivers/net/e1000/e1000_osdep.h~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_osdep.h
--- a/drivers/net/e1000/e1000_osdep.h~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_osdep.h
@@ -58,7 +58,7 @@ typedef enum {
#define DEBUGOUT1(S, A...)
#endif
-#define DEBUGFUNC(F) DEBUGOUT(F)
+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
#define DEBUGOUT2 DEBUGOUT1
#define DEBUGOUT3 DEBUGOUT2
#define DEBUGOUT7 DEBUGOUT3
diff -puN drivers/net/e1000/e1000_phy.c~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_phy.c
--- a/drivers/net/e1000/e1000_phy.c~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_phy.c
@@ -998,7 +998,13 @@ e1000_phy_force_speed_duplex_igp(struct
DEBUGFUNC("e1000_phy_force_speed_duplex_igp");
- ret_val = e1000_phy_force_speed_duplex_setup(hw);
+ ret_val = e1000_read_phy_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ e1000_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = e1000_write_phy_reg(hw, PHY_CONTROL, phy_data);
if (ret_val)
goto out;
@@ -1067,10 +1073,6 @@ e1000_phy_force_speed_duplex_m88(struct
DEBUGFUNC("e1000_phy_force_speed_duplex_m88");
- ret_val = e1000_phy_force_speed_duplex_setup(hw);
- if (ret_val)
- goto out;
-
/* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
* forced whenever speed and duplex are forced.
*/
@@ -1085,8 +1087,16 @@ e1000_phy_force_speed_duplex_m88(struct
DEBUGOUT1("M88E1000 PSCR: %X\n", phy_data);
+ ret_val = e1000_read_phy_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ e1000_phy_force_speed_duplex_setup(hw, &phy_data);
+
/* Reset the phy to commit changes. */
- ret_val = e1000_phy_commit(hw);
+ phy_data |= MII_CR_RESET;
+
+ ret_val = e1000_write_phy_reg(hw, PHY_CONTROL, phy_data);
if (ret_val)
goto out;
@@ -1155,19 +1165,20 @@ out:
/**
* e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
* @hw - pointer to the HW structure
+ * @phy_ctrl - pointer to current value of PHY_CONTROL
*
* Forces speed and duplex on the PHY by doing the following: disable flow
* control, force speed/duplex on the MAC, disable auto speed detection,
* disable auto-negotiation, configure duplex, configure speed, configure
- * the collision distance, write configuration to CTRL and PHY registers.
+ * the collision distance, write configuration to CTRL register. The
+ * caller must write to the PHY_CONTROL register for these settings to
+ * take affect.
**/
-s32
-e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw)
+void
+e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
{
struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
u32 ctrl;
- u16 phy_ctrl;
DEBUGFUNC("e1000_phy_force_speed_duplex_setup");
@@ -1182,47 +1193,36 @@ e1000_phy_force_speed_duplex_setup(struc
/* Disable Auto Speed Detection */
ctrl &= ~E1000_CTRL_ASDE;
- ret_val = e1000_read_phy_reg(hw, PHY_CONTROL, &phy_ctrl);
- if (ret_val)
- goto out;
-
/* Disable autoneg on the phy */
- phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
+ *phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
/* Forcing Full or Half Duplex? */
if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
ctrl &= ~E1000_CTRL_FD;
- phy_ctrl &= ~MII_CR_FULL_DUPLEX;
+ *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
DEBUGOUT("Half Duplex\n");
} else {
ctrl |= E1000_CTRL_FD;
- phy_ctrl |= MII_CR_FULL_DUPLEX;
+ *phy_ctrl |= MII_CR_FULL_DUPLEX;
DEBUGOUT("Full Duplex\n");
}
/* Forcing 10mb or 100mb? */
if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
ctrl |= E1000_CTRL_SPD_100;
- phy_ctrl |= MII_CR_SPEED_100;
- phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ *phy_ctrl |= MII_CR_SPEED_100;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
DEBUGOUT("Forcing 100mb\n");
} else {
ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
- phy_ctrl |= MII_CR_SPEED_10;
- phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ *phy_ctrl |= MII_CR_SPEED_10;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
DEBUGOUT("Forcing 10mb\n");
}
e1000_config_collision_dist_generic(hw);
E1000_WRITE_REG(hw, CTRL, ctrl);
-
- ret_val = e1000_write_phy_reg(hw, PHY_CONTROL, phy_ctrl);
- if (ret_val)
- goto out;
-
-out:
- return ret_val;
}
/**
diff -puN drivers/net/e1000/e1000_phy.h~e1000-update-new-hardware-init-layer-code-with-bugfixes drivers/net/e1000/e1000_phy.h
--- a/drivers/net/e1000/e1000_phy.h~e1000-update-new-hardware-init-layer-code-with-bugfixes
+++ a/drivers/net/e1000/e1000_phy.h
@@ -44,38 +44,38 @@ typedef enum {
#include "e1000_api.h"
-s32 e1000_check_downshift_generic(struct e1000_hw *hw);
-s32 e1000_check_polarity_m88(struct e1000_hw *hw);
-s32 e1000_check_polarity_igp(struct e1000_hw *hw);
-s32 e1000_check_reset_block_generic(struct e1000_hw *hw);
-s32 e1000_copper_link_autoneg(struct e1000_hw *hw);
-s32 e1000_copper_link_setup_igp(struct e1000_hw *hw);
-s32 e1000_copper_link_setup_m88(struct e1000_hw *hw);
-s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw);
-s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw);
-s32 e1000_get_cable_length_m88(struct e1000_hw *hw);
-s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw);
-s32 e1000_get_cfg_done_generic(struct e1000_hw *hw);
-s32 e1000_get_phy_id(struct e1000_hw *hw);
-s32 e1000_get_phy_info_igp(struct e1000_hw *hw);
-s32 e1000_get_phy_info_m88(struct e1000_hw *hw);
-s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw);
-s32 e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw);
-s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw);
-s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw);
-s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
-s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, boolean_t active);
-s32 e1000_setup_copper_link_generic(struct e1000_hw *hw);
-s32 e1000_wait_autoneg_generic(struct e1000_hw *hw);
-s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data);
-s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
-s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
-s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
-s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, boolean_t *success);
+s32 e1000_check_downshift_generic(struct e1000_hw *hw);
+s32 e1000_check_polarity_m88(struct e1000_hw *hw);
+s32 e1000_check_polarity_igp(struct e1000_hw *hw);
+s32 e1000_check_reset_block_generic(struct e1000_hw *hw);
+s32 e1000_copper_link_autoneg(struct e1000_hw *hw);
+s32 e1000_copper_link_setup_igp(struct e1000_hw *hw);
+s32 e1000_copper_link_setup_m88(struct e1000_hw *hw);
+s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+s32 e1000_get_cable_length_m88(struct e1000_hw *hw);
+s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw);
+s32 e1000_get_cfg_done_generic(struct e1000_hw *hw);
+s32 e1000_get_phy_id(struct e1000_hw *hw);
+s32 e1000_get_phy_info_igp(struct e1000_hw *hw);
+s32 e1000_get_phy_info_m88(struct e1000_hw *hw);
+s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw);
+void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw);
+s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw);
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
+s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, boolean_t active);
+s32 e1000_setup_copper_link_generic(struct e1000_hw *hw);
+s32 e1000_wait_autoneg_generic(struct e1000_hw *hw);
+s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
+s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, boolean_t *success);
_
Patches currently in -mm which might be from cramerj@xxxxxxxxx are
git-e1000.patch
e1000-update-new-hardware-init-layer-code-with-bugfixes.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
