The patch titled
serial: support for new board
has been added to the -mm tree. Its filename is
serial-support-for-new-board.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: serial: support for new board
From: Matthias Fuchs <matthias.fuchs@xxxxxxxxxxxxxxxxxxx>
Add support for the CPCI-ASIO4 quad port CompactPCI UART board from
electronic system design gmbh.
Signed-off-by: Matthias Fuchs <matthias.fuchs@xxxxxxxxxxxxxxxxxxx>
Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/serial/8250_pci.c | 11 +++++++++++
include/linux/pci_ids.h | 3 +++
2 files changed, 14 insertions(+)
diff -puN drivers/serial/8250_pci.c~serial-support-for-new-board drivers/serial/8250_pci.c
--- a/drivers/serial/8250_pci.c~serial-support-for-new-board
+++ a/drivers/serial/8250_pci.c
@@ -936,6 +936,7 @@ enum pci_board_num_t {
pbn_b2_1_115200,
pbn_b2_2_115200,
+ pbn_b2_4_115200,
pbn_b2_8_115200,
pbn_b2_1_460800,
@@ -1249,6 +1250,12 @@ static struct pciserial_board pci_boards
.base_baud = 115200,
.uart_offset = 8,
},
+ [pbn_b2_4_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[pbn_b2_8_115200] = {
.flags = FL_BASE2,
.num_ports = 8,
@@ -1990,6 +1997,10 @@ static struct pci_device_id serial_pci_t
{ PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_panacom2 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ PCI_VENDOR_ID_ESDGMBH,
+ PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
+ pbn_b2_4_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
diff -puN include/linux/pci_ids.h~serial-support-for-new-board include/linux/pci_ids.h
--- a/include/linux/pci_ids.h~serial-support-for-new-board
+++ a/include/linux/pci_ids.h
@@ -955,6 +955,7 @@
#define PCI_DEVICE_ID_PLX_R753 0x1152
#define PCI_DEVICE_ID_PLX_OLITEC 0x1187
#define PCI_DEVICE_ID_PLX_PCI200SYN 0x3196
+#define PCI_DEVICE_ID_PLX_9030 0x9030
#define PCI_DEVICE_ID_PLX_9050 0x9050
#define PCI_DEVICE_ID_PLX_9080 0x9080
#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001
@@ -1688,6 +1689,8 @@
#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
#define PCI_DEVICE_ID_LML_33R10 0x8a02
+#define PCI_VENDOR_ID_ESDGMBH 0x12fe
+#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
#define PCI_VENDOR_ID_SIIG 0x131f
#define PCI_SUBVENDOR_ID_SIIG 0x131f
_
Patches currently in -mm which might be from matthias.fuchs@xxxxxxxxxxxxxxxxxxx are
serial-support-for-new-board.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
