The quilt patch titled
Subject: mm/damon: add data structure for monitoring intervals auto-tuning
has been removed from the -mm tree. Its filename was
mm-damon-add-data-structure-for-monitoring-intervals-auto-tuning.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: SeongJae Park <sj@xxxxxxxxxx>
Subject: mm/damon: add data structure for monitoring intervals auto-tuning
Date: Mon, 3 Mar 2025 14:17:19 -0800
Patch series "mm/damon: auto-tune aggregation interval".
DAMON requires time-consuming and repetitive aggregation interval tuning.
Introduce a feature for automating it using a feedback loop that aims an
amount of observed access events, like auto-exposing cameras.
Background: Access Frequency Monitoring and Aggregation Interval
================================================================
DAMON checks if each memory element (damon_region) is accessed or not for
every user-specified time interval called 'sampling interval'. It
aggregates the check intervals on per-element counter called
'nr_accesses'. DAMON users can read the counters to get the access
temperature of a given element. The counters are reset for every another
user-specified time interval called 'aggregation interval'.
This can be illustrated as DAMON continuously capturing a snapshot of
access events that happen and captured within the last aggregation
interval. This implies the aggregation interval plays a key role for the
quality of the snapshots, like the camera exposure time. If it is too
short, the amount of access events that happened and captured for each
snapshot is small, so each snapshot will show no many interesting things
but just a cold and dark world with hopefuly one pale blue dot or two. If
it is too long, too many events are aggregated in a single shot, so each
snapshot will look like world of flames, or Muspellheim. It will be
difficult to find practical insights in both cases.
Problem: Time Consuming and Repetitive Tuning
=============================================
The appropriate length of the aggregation interval depends on how
frequently the system and workloads are making access events that DAMON
can observe. Hence, users have to tune the interval with excessive amount
of tests with the target system and workloads. If the system and
workloads are changed, the tuning should be done again. If the
characteristic of the workloads is dynamic, it becomes more challenging.
It is therefore time-consuming and repetitive.
The tuning challenge mainly stems from the wrong question. It is not
asking users what quality of monitoring results they want, but how DAMON
should operate for their hidden goal. To make the right answer, users
need to fully understand DAMON's mechanisms and the characteristics of
their workloads. Users shouldn't be asked to understand the underlying
mechanism. Understanding the characteristics of the workloads shouldn't
be the role of users but DAMON.
Aim-oriented Feedback-driven Auto-Tuning
=========================================
Fortunately, the appropriate length of the aggregation interval can be
inferred using a feedback loop. If the current snapshots are showing no
much intresting information, in other words, if it shows only rare access
events, increasing the aggregation interval helps, and vice versa. We
tested this theory on a few real-world workloads, and documented one of
the experience with an official DAMON monitoring intervals tuning
guideline. Since it is a simple theory that requires repeatable tries, it
can be a good job for machines.
Based on the guideline's theory, we design an automation of aggregation
interval tuning, in a way similar to that of camera auto-exposure feature.
It defines the amount of interesting information as the ratio of
DAMON-observed access events that DAMON actually observed to theoretical
maximum amount of it within each snapshot. Events are accounted in byte
and sampling attempts granularity. For example, let's say there is a
region of 'X' bytes size. DAMON tried access check smapling for the
region 'Y' times in total for a given aggregation. Among the 'Y'
attempts, 'Z' times it shown positive results. Then, the theoritical
maximum number of access events for the region is 'X * Y'. And the number
of access events that DAMON has observed for the region is 'X * Z'. The
abount of the interesting information is '(X * Z / X * Y)'. Note that
each snapshot would have multiple regions.
Users can set an arbitrary value of the ratio as their target. Once the
target is set, the automation periodically measures the current value of
the ratio and increase or decrease the aggregation interval if the ratio
value is lower or higher than the target. The amount of the change is
proportion to the distance between the current adn the target values.
To avoid auto-tuning goes too long way, let users set the minimum and the
maximum aggregation interval times. Changing only aggregation interval
while sampling interval is kept makes the maximum level of access
frequency in each snapshot, or discernment of regions inconsistent. Also,
unnecessarily short sampling interval causes meaningless monitoring
overhed. The automation therefore adjusts the sampling interval together
with aggregation interval, while keeping the ratio between the two
intervals. Users can set the ratio, or the discernment.
Discussion
==========
The modified question (aimed amount of access events, or lights, in each
snapshot) is easy to answer by both the users and the kernel. If users
are interested in finding more cold regions, the value should be lower,
and vice versa. If users have no idea, kernel can suggest a fair default
value based on some theories and experiments. For example, based on the
Pareto principle (80/20 rule), we could expect 20% target ratio will
capture 80% of real access events. Since 80% might be too high, applying
the rule once again, 4% (20% * 20%) may capture about 56% (80% * 80%) of
real access events.
Sampling to aggregation intervals ratio and min/max aggregation intervals
are also arguably easy to answer. What users want is discernment of
regions for efficient system operation, for examples, X amount of colder
regions or Y amount of warmer regions, not exactly how many times each
cache line is accessed in nanoseconds degree. The appropriate min/max
aggregation interval can relatively naively set, and may better to set for
aimed monitoring overhead. Since sampling interval is directly deciding
the overhead, setting it based on the sampling interval can be easy. With
my experiences, I'd argue the intervals ratio 0.05, and 5 milliseconds to
20 seconds sampling interval range (100 milliseconds to 400 seconds
aggregation interval) can be a good default suggestion.
Evaluation
==========
On a machine running a real world server workload, I ran DAMON to monitor
its physical address space for about 23 hours, with this feature turned
on. We set it to tune sampling interval in a range from 5 milliseconds to
10 seconds, aiming 4 % DAMON-observed access ratio per three aggregation
intervals. The exact command I used is as below.
damo start --monitoring_intervals_goal 4% 3 5ms 10s --damos_action stat
During the test run, DAMON continuously updated sampling and aggregation
intervals as designed, within the given range. For all the time, DAMON
was able to find the intervals that meets the target access events ratio
in the given intervals range (sampling interval between 5 milliseconds and
10 seconds).
For most of the time, tuned sampling interval was converged in 300-400
milliseconds. It made only small amount of changes within the range. The
average of the tuned sampling interval during the test was about 380
milliseconds.
The workload periodically gets less load and decreases its CPU usage.
Presumably this also caused it making less memory access events.
Reactively to such event,s DAMON also increased the intervals as expected.
It was still able to find the optimum interval that satisfying the target
access ratio within the given intervals range. Usually it was converged
to about 5 seconds. Once the workload gets normal amount of load again,
DAMON reactively reduced the intervals to the normal range.
I collected and visualized DAMON's monitoring results on the server a few
times. Every time the visualized access pattern looked not biased to only
cold or hot pages but diverse and balanced. Let me show some of the
snapshots that I collected at the nearly end of the test (after about 23
hours have passed since starting DAMON on the server).
The recency histogram looks as below. Please note that this visualization
shows only a very coarse grained information. For more details about the
visualization format, please refer to DAMON user-space tool
documentation[1].
# ./damo report access --style recency-sz-hist --tried_regions_of 0 0 0 --access_rate 0 0
<last accessed time (us)> <total size>
[-19 h 7 m 45.514 s, -17 h 12 m 58.963 s) 6.198 GiB |**** |
[-17 h 12 m 58.963 s, -15 h 18 m 12.412 s) 0 B | |
[-15 h 18 m 12.412 s, -13 h 23 m 25.860 s) 0 B | |
[-13 h 23 m 25.860 s, -11 h 28 m 39.309 s) 0 B | |
[-11 h 28 m 39.309 s, -9 h 33 m 52.757 s) 0 B | |
[-9 h 33 m 52.757 s, -7 h 39 m 6.206 s) 0 B | |
[-7 h 39 m 6.206 s, -5 h 44 m 19.654 s) 0 B | |
[-5 h 44 m 19.654 s, -3 h 49 m 33.103 s) 0 B | |
[-3 h 49 m 33.103 s, -1 h 54 m 46.551 s) 0 B | |
[-1 h 54 m 46.551 s, -0 ns) 16.967 GiB |********* |
[-0 ns, --6886551440000 ns) 38.835 GiB |********************|
memory bw estimate: 9.425 GiB per second
total size: 62.000 GiB
It shows about 38 GiB of memory was accessed at least once within last
aggregation interval (given ~300 milliseconds tuned sampling interval,
this is about six seconds). This is about 61 % of the total memory. In
other words, DAMON found warmest 61 % memory of the system. The number is
particularly interesting given our Pareto principle based theory for the
tuning goal value. We set it as 20 % of 20 % (4 %), thinking it would
capture 80 % of 80 % (64 %) real access events. And it foudn 61 % hot
memory, or working set. Nevertheless, to make the theory clearer, much
more discussion and tests would be needed. At the moment, nonetheless, we
can say making the target value higher helps finding more hot memory
regions.
The histogram also shows an amount of cold memory. About 17 GiB memory of
the system has not accessed at least for last aggregation interval (about
six seconds), and at most for about last two hours. The real longest
unaccessed time of the 17 GiB memory was about 19 minutes, though. This
is a limitation of this visualization format.
It further found very cold 6 GiB memory. It has not accessed at least for
last 17 hours and at most 19 hours.
What about hot memory distribution? To see this, I capture and visualize
the snapshot in access temperature histogram. Again, please refer to the
DAMON user-space tool documentation[1] for the format and what access
temperature mean. Both the visualization and metric shows only very
coarse grained and limited information. The resulting histogram look like
below.
# ./damo report access --style temperature-sz-hist --tried_regions_of 0 0 0
<temperature> <total size>
[-6,840,763,776,000, -5,501,580,939,800) 6.198 GiB |*** |
[-5,501,580,939,800, -4,162,398,103,600) 0 B | |
[-4,162,398,103,600, -2,823,215,267,400) 0 B | |
[-2,823,215,267,400, -1,484,032,431,200) 0 B | |
[-1,484,032,431,200, -144,849,595,000) 0 B | |
[-144,849,595,000, 1,194,333,241,200) 55.802 GiB |********************|
[1,194,333,241,200, 2,533,516,077,400) 4.000 KiB |* |
[2,533,516,077,400, 3,872,698,913,600) 4.000 KiB |* |
[3,872,698,913,600, 5,211,881,749,800) 8.000 KiB |* |
[5,211,881,749,800, 6,551,064,586,000) 12.000 KiB |* |
[6,551,064,586,000, 7,890,247,422,200) 4.000 KiB |* |
memory bw estimate: 5.178 GiB per second
total size: 62.000 GiB
We can see most of the memory is in similar access temperature range, and
definitely some pages are extremely hot.
To see the picture in more detail, let's capture and visualize the
snapshot per DAMON-region, sorted by their access temperature. The total
number of the regions was about 300. Due to the limited space, I'm
showing only a few parts of the output here.
# ./damo report access --style hot --tried_regions_of 0 0 0
heatmap: 00000000888888889999999888888888888888888888888888888888888888888888888888888888
# min/max temperatures: -6,827,258,184,000, 17,589,052,500, column size: 793.600 MiB
|999999999999999999999999999999999999999| 4.000 KiB access 100 % 18 h 9 m 43.918 s
|999999999999999999999999999999999999999| 8.000 KiB access 100 % 17 h 56 m 5.351 s
|999999999999999999999999999999999999999| 4.000 KiB access 100 % 15 h 24 m 19.634 s
|999999999999999999999999999999999999999| 4.000 KiB access 100 % 14 h 10 m 55.606 s
|999999999999999999999999999999999999999| 4.000 KiB access 100 % 11 h 34 m 18.993 s
[...]
|99999999999999999999999999999| 8.000 KiB access 100 % 1 m 27.945 s
|11111111111111111111111111111| 80.000 KiB access 15 % 1 m 21.180 s
|00000000000000000000000000000| 24.000 KiB access 5 % 1 m 21.180 s
|00000000000000000000000000000| 5.919 GiB access 10 % 1 m 14.415 s
|99999999999999999999999999999| 12.000 KiB access 100 % 1 m 7.650 s
[...]
|0| 4.000 KiB access 5 % 0 ns
|0| 12.000 KiB access 5 % 0 ns
|0| 188.000 KiB access 0 % 0 ns
|0| 24.000 KiB access 0 % 0 ns
|0| 48.000 KiB access 0 % 0 ns
[...]
|0000000000000000000000000000000| 8.000 KiB access 0 % 6 m 45.901 s
|00000000000000000000000000000000| 36.000 KiB access 0 % 7 m 26.491 s
|00000000000000000000000000000000| 4.000 KiB access 0 % 12 m 37.682 s
|000000000000000000000000000000000| 8.000 KiB access 0 % 18 m 9.168 s
|000000000000000000000000000000000| 16.000 KiB access 0 % 19 m 3.288 s
|0000000000000000000000000000000000000000| 6.198 GiB access 0 % 18 h 57 m 52.582 s
memory bw estimate: 8.798 GiB per second
total size: 62.000 GiB
We can see DAMON found small and extremely hot regions that accessed for
all access check sampling (once per about 300 milliseconds) for more than
10 hours. The access temperature rapidly decreases. DAMON was also able
to find small and big regions that not accessed for up to about 19
minutes. It even found an outlier cold region of 6 GiB that not accessed
for about 19 hours. It is unclear what the outlier region is, as of this
writing.
For the testing, DAMON was consuming about 0.1% of single CPU time. This
is again expected results, since DAMON was using about 370 milliseconds
sampling interval in most case.
# ps -p $kdamond_pid -o %cpu
%CPU
0.1
I also ran similar tests against kernel build workload and an in-memory
cache workload benchmark[2]. Detialed results including tuned intervals
and captured access pattern were of course different sicne those depend on
the workloads. But the auto-tuning feature was always working as expected
like the above results for the real world workload.
To wrap up, with intervals auto-tuning feature, DAMON was able to capture
access pattern snapshots of a quality on a real world server workload.
The auto-tuning feature was able to adaptively react to the dynamic access
patterns of the workload and reliably provide consistent monitoring
results without manual human interventions. Also, the auto-tuning made
DAMON consumes only necessary amount of resource for the required quality.
References
==========
[1] https://github.com/damonitor/damo/blob/next/USAGE.md#access-report-styles
[2] https://github.com/facebookresearch/DCPerf/blob/main/packages/tao_bench/README.md
This patch (of 8):
Add data structures for DAMON sampling and aggregation intervals automatic
tuning that aims specific amount of DAMON-observed access events per
snapshot. In more detail, define the data structure for the tuning goal,
link it to the monitoring attributes data structure so that DAMON kernel
API callers can make the request, and update parameters setup DAMON
function to respect the new parameter.
Link: https://lkml.kernel.org/r/20250303221726.484227-1-sj@xxxxxxxxxx
Link: https://lkml.kernel.org/r/20250303221726.484227-2-sj@xxxxxxxxxx
Signed-off-by: SeongJae Park <sj@xxxxxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
include/linux/damon.h | 27 +++++++++++++++++++++++++++
mm/damon/core.c | 22 ++++++++++++++++++++++
2 files changed, 49 insertions(+)
--- a/include/linux/damon.h~mm-damon-add-data-structure-for-monitoring-intervals-auto-tuning
+++ a/include/linux/damon.h
@@ -660,11 +660,37 @@ struct damon_call_control {
};
/**
+ * struct damon_intervals_goal - Monitoring intervals auto-tuning goal.
+ *
+ * @access_bp: Access events observation ratio to achieve in bp.
+ * @aggrs: Number of aggregations to acheive @access_bp within.
+ * @min_sample_us: Minimum resulting sampling interval in microseconds.
+ * @max_sample_us: Maximum resulting sampling interval in microseconds.
+ *
+ * DAMON automatically tunes &damon_attrs->sample_interval and
+ * &damon_attrs->aggr_interval aiming the ratio in bp (1/10,000) of
+ * DAMON-observed access events to theoretical maximum amount within @aggrs
+ * aggregations be same to @access_bp. The logic increases
+ * &damon_attrs->aggr_interval and &damon_attrs->sampling_interval in same
+ * ratio if the current access events observation ratio is lower than the
+ * target for each @aggrs aggregations, and vice versa.
+ *
+ * If @aggrs is zero, the tuning is disabled and hence this struct is ignored.
+ */
+struct damon_intervals_goal {
+ unsigned long access_bp;
+ unsigned long aggrs;
+ unsigned long min_sample_us;
+ unsigned long max_sample_us;
+};
+
+/**
* struct damon_attrs - Monitoring attributes for accuracy/overhead control.
*
* @sample_interval: The time between access samplings.
* @aggr_interval: The time between monitor results aggregations.
* @ops_update_interval: The time between monitoring operations updates.
+ * @intervals_goal: Intervals auto-tuning goal.
* @min_nr_regions: The minimum number of adaptive monitoring
* regions.
* @max_nr_regions: The maximum number of adaptive monitoring
@@ -684,6 +710,7 @@ struct damon_attrs {
unsigned long sample_interval;
unsigned long aggr_interval;
unsigned long ops_update_interval;
+ struct damon_intervals_goal intervals_goal;
unsigned long min_nr_regions;
unsigned long max_nr_regions;
};
--- a/mm/damon/core.c~mm-damon-add-data-structure-for-monitoring-intervals-auto-tuning
+++ a/mm/damon/core.c
@@ -615,6 +615,25 @@ static void damon_update_monitoring_resu
r, old_attrs, new_attrs);
}
+/*
+ * damon_valid_intervals_goal() - return if the intervals goal of @attrs is
+ * valid.
+ */
+static bool damon_valid_intervals_goal(struct damon_attrs *attrs)
+{
+ struct damon_intervals_goal *goal = &attrs->intervals_goal;
+
+ /* tuning is disabled */
+ if (!goal->aggrs)
+ return true;
+ if (goal->min_sample_us > goal->max_sample_us)
+ return false;
+ if (attrs->sample_interval < goal->min_sample_us ||
+ goal->max_sample_us < attrs->sample_interval)
+ return false;
+ return true;
+}
+
/**
* damon_set_attrs() - Set attributes for the monitoring.
* @ctx: monitoring context
@@ -635,6 +654,9 @@ int damon_set_attrs(struct damon_ctx *ct
attrs->sample_interval : 1;
struct damos *s;
+ if (!damon_valid_intervals_goal(attrs))
+ return -EINVAL;
+
if (attrs->min_nr_regions < 3)
return -EINVAL;
if (attrs->min_nr_regions > attrs->max_nr_regions)
_
Patches currently in -mm which might be from sj@xxxxxxxxxx are
mm-damon-sysfs-schemes-let-damon_sysfs_scheme_set_filters-be-used-for-different-named-directories.patch
mm-damon-sysfs-schemes-implement-core_filters-and-ops_filters-directories.patch
mm-damon-sysfs-schemes-commit-filters-in-coreops_filters-directories.patch
mm-damon-core-expose-damos_filter_for_ops-to-damon-kernel-api-callers.patch
mm-damon-sysfs-schemes-record-filters-of-which-layer-should-be-added-to-the-given-filters-directory.patch
mm-damon-sysfs-schemes-return-error-when-for-attempts-to-install-filters-on-wrong-sysfs-directory.patch
docs-abi-damon-document-coreops_filters-directories.patch
docs-admin-guide-mm-damon-usage-update-for-coreops_filters-directories.patch
mm-damon-sysfs-validate-user-inputs-from-damon_sysfs_commit_input.patch
mm-damon-core-invoke-kdamond_call-after-merging-is-done-if-possible.patch
mm-damon-core-make-damon_set_attrs-be-safe-to-be-called-from-damon_call.patch
mm-damon-sysfs-handle-commit-command-using-damon_call.patch
mm-damon-sysfs-remove-damon_sysfs_cmd_request-code-from-damon_sysfs_handle_cmd.patch
mm-damon-sysfs-remove-damon_sysfs_cmd_request_callback-and-its-callers.patch
mm-damon-sysfs-remove-damon_sysfs_cmd_request-and-its-readers.patch
mm-damon-sysfs-schemes-remove-obsolete-comment-for-damon_sysfs_schemes_clear_regions.patch
mm-damon-remove-damon_callback-private.patch
mm-damon-remove-before_start-of-damon_callback.patch
mm-damon-remove-damon_callback-after_sampling.patch
mm-damon-remove-damon_callback-before_damos_apply.patch
mm-damon-remove-damon_operations-reset_aggregated.patch
mm-damon-sysfs-schemes-avoid-wformat-security-warning-on-damon_sysfs_access_pattern_add_range_dir.patch
mm-madvise-use-is_memory_failure-from-madvise_do_behavior.patch
mm-madvise-split-out-populate-behavior-check-logic.patch
mm-madvise-deduplicate-madvise_do_behavior-skip-case-handlings.patch
mm-madvise-remove-len-parameter-of-madvise_do_behavior.patch
