The patch titled
Add support for ASUS A6VA, M6V, W5F, V6V laptops in asus-acpi
has been removed from the -mm tree. Its filename was
add-support-for-asus-a6va-m6v-w5f-v6v-laptops-in-asus-acpi.patch
This patch was dropped because it was nacked by the maintainer
------------------------------------------------------
Subject: Add support for ASUS A6VA, M6V, W5F, V6V laptops in asus-acpi
From: "Panagiotis Papadakos" <papadako@xxxxxxxxx>
This patch is based on
http://www.mail-archive.com/linux-acpi@xxxxxxxxxxxxxxx/msg02277.html
and adds support for ASUS A6VA, M6V, W5F and V6V laptops in asus-acpi.
Also some trailing spaces cleanups.
Cc: Timo Hoenig <thoenig@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/acpi/asus_acpi.c | 93 ++++++++++++++++++++++++++++++++-----
1 files changed, 82 insertions(+), 11 deletions(-)
diff -puN drivers/acpi/asus_acpi.c~add-support-for-asus-a6va-m6v-w5f-v6v-laptops-in-asus-acpi drivers/acpi/asus_acpi.c
--- a/drivers/acpi/asus_acpi.c~add-support-for-asus-a6va-m6v-w5f-v6v-laptops-in-asus-acpi
+++ a/drivers/acpi/asus_acpi.c
@@ -122,6 +122,7 @@ struct asus_hotk {
A1x = 0, //A1340D, A1300F
A2x, //A2500H
A4G, //A4700G
+ A6VA, //A6VA
D1x, //D1
L2D, //L2000D
L3C, //L3800C
@@ -134,12 +135,15 @@ struct asus_hotk {
M2E, //M2400E, L4400L
M6N, //M6800N, W3400N
M6R, //M6700R, A3000G
+ M6V, //M6A, M6V-B022P, M6V-8012P
P30, //Samsung P30
S1x, //S1300A, but also L1400B and M2400A (L84F)
S2x, //S200 (J1 reported), Victor MP-XP7210
W1N, //W1000N
- W5A, //W5A
W3V, //W3030V
+ W5A, //W5A
+ W5F, //W5F
+ V6V, //V6V
xxN, //M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
//(Centrino)
END_MODEL
@@ -194,6 +198,17 @@ static struct model_data model_conf[END_
.display_get = "\\ADVG"},
{
+ .name = "A6VA",
+ .mt_mled = "MLED",
+ .mt_wled = "WLED",
+ .mt_lcd_switch = "\\Q11",
+ .lcd_status = "\\RGPL",
+ .brightness_set = "SPLV",
+ .brightness_get = "GPLV",
+ .display_set = "SDSP",
+ .display_get = "\\ADVG"},
+
+ {
.name = "D1x",
.mt_mled = "MLED",
.mt_lcd_switch = "\\Q0D",
@@ -326,6 +341,20 @@ static struct model_data model_conf[END_
.display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
{
+ .name = "M6V",
+ .mt_bt_switch = "BLED",
+ .mt_wled = "WLED",
+ .mt_mled = NULL,
+ .mt_lcd_switch = xxN_PREFIX "_Q10",
+ .bt_status = "\\_SB.PCI0.SBRG.BLTS",
+ .lcd_status = "\\RGPL",
+ .wled_status = "\\WLSF",
+ .display_get = "\\_SB.PCI0.P0P3.VGA.GETD",
+ .display_set = "SDSP",
+ .brightness_set = "SPLV",
+ .brightness_get = "GPLV"},
+
+ {
.name = "P30",
.mt_wled = "WLED",
.mt_lcd_switch = P30_PREFIX "_Q0E",
@@ -368,6 +397,17 @@ static struct model_data model_conf[END_
.display_get = "\\ADVG"},
{
+ .name = "W3V",
+ .mt_mled = "MLED",
+ .mt_wled = "WLED",
+ .mt_lcd_switch = xxN_PREFIX "_Q10",
+ .lcd_status = "\\BKLT",
+ .brightness_set = "SPLV",
+ .brightness_get = "GPLV",
+ .display_set = "SDSP",
+ .display_get = "\\INFB"},
+
+ {
.name = "W5A",
.mt_bt_switch = "BLED",
.mt_wled = "WLED",
@@ -378,17 +418,30 @@ static struct model_data model_conf[END_
.display_get = "\\ADVG"},
{
- .name = "W3V",
- .mt_mled = "MLED",
+ .name = "W5F",
+ .mt_bt_switch = "BLED",
.mt_wled = "WLED",
+ .mt_tled = "TLED",
.mt_lcd_switch = xxN_PREFIX "_Q10",
- .lcd_status = "\\BKLT",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
- .display_get = "\\INFB"},
+ .display_get = "\\ADVG"},
+
+ {
+ .name = "V6V",
+ .mt_bt_switch = "BLED",
+ .mt_wled = "WLED",
+ .mt_tled = "TLED",
+ .mt_lcd_switch = xxN_PREFIX "_Q10",
+ .bt_status = "\\_SB.PCI0.SBRG.BLTS",
+ .display_get = "\\_SB.PCI0.POP1.VGA.GETD",
+ .display_set = "SDSP",
+ .brightness_set = "SPLV",
+ .brightness_get = "GPLV",
+ .lcd_status = "\\BKLT"},
- {
+ {
.name = "xxN",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
@@ -695,7 +748,7 @@ static int get_lcd_state(void)
{
int lcd = 0;
- if (hotk->model != L3H) {
+ if (hotk->model != A6VA && hotk->model != M6V && hotk->model != L3H) {
/* We don't have to check anything if we are here */
if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
printk(KERN_WARNING
@@ -715,9 +768,15 @@ static int get_lcd_state(void)
/* Note: the following values are partly guessed up, but
otherwise they seem to work */
mt_params[0].type = ACPI_TYPE_INTEGER;
- mt_params[0].integer.value = 0x02;
mt_params[1].type = ACPI_TYPE_INTEGER;
- mt_params[1].integer.value = 0x02;
+
+ if (hotk->model == A6VA || hotk->model == M6V) {
+ mt_params[0].integer.value = 0x15;
+ mt_params[1].integer.value = 0x01;
+ } else if (hotk->model == L3H) {
+ mt_params[0].integer.value = 0x02;
+ mt_params[1].integer.value = 0x02;
+ }
output.length = sizeof(out_obj);
output.pointer = &out_obj;
@@ -727,9 +786,13 @@ static int get_lcd_state(void)
&input, &output);
if (status != AE_OK)
return -1;
- if (out_obj.type == ACPI_TYPE_INTEGER)
+ if (out_obj.type == ACPI_TYPE_INTEGER) {
/* That's what the AML code does */
- lcd = out_obj.integer.value >> 8;
+ if (hotk->model == A6VA || hotk->model == M6V)
+ lcd = out_obj.integer.value;
+ else if (hotk->model == L3H)
+ lcd = out_obj.integer.value >> 8;
+ }
}
return (lcd & 1);
@@ -1095,6 +1158,8 @@ static int asus_model_match(char *model)
return M1A;
else if (strncmp(model, "M2", 2) == 0 || strncmp(model, "L4E", 3) == 0)
return M2E;
+ else if (strncmp(model, "M6A", 3) == 0 || strncmp(model, "M6V", 3) == 0)
+ return M6V;
else if (strncmp(model, "L2", 2) == 0)
return L2D;
else if (strncmp(model, "L8", 2) == 0)
@@ -1105,6 +1170,8 @@ static int asus_model_match(char *model)
return A1x;
else if (strncmp(model, "A2", 2) == 0)
return A2x;
+ else if (strncmp(model, "A6VA", 4) == 0)
+ return A6VA;
else if (strncmp(model, "J1", 2) == 0)
return S2x;
else if (strncmp(model, "L5", 2) == 0)
@@ -1117,6 +1184,10 @@ static int asus_model_match(char *model)
return W3V;
else if (strncmp(model, "W5A", 3) == 0)
return W5A;
+ else if (strncmp(model, "W5F", 3) == 0)
+ return W5F;
+ else if (strncmp(model, "V6V", 3) == 0)
+ return V6V;
else
return END_MODEL;
}
_
Patches currently in -mm which might be from papadako@xxxxxxxxx are
add-support-for-asus-a6va-m6v-w5f-v6v-laptops-in-asus-acpi.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
