[merged mm-nonmm-stable] riscv-boot-add-imagexz-support.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The quilt patch titled
     Subject: riscv: boot: add Image.xz support
has been removed from the -mm tree.  Its filename was
     riscv-boot-add-imagexz-support.patch

This patch was dropped because it was merged into the mm-nonmm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

------------------------------------------------------
From: Lasse Collin <lasse.collin@xxxxxxxxxxx>
Subject: riscv: boot: add Image.xz support
Date: Sun, 21 Jul 2024 16:36:31 +0300

The Image.* targets existed for other compressors already.  Bootloader
support is needed for decompression.

This is for CONFIG_EFI_ZBOOT=n. With CONFIG_EFI_ZBOOT=y, XZ was already
available.

Comparision with Linux 6.10 RV64GC tinyconfig (in KiB):

    1027 Image
     594 Image.gz
     541 Image.zst
     510 Image.lzma
     474 Image.xz

Link: https://lkml.kernel.org/r/20240721133633.47721-17-lasse.collin@xxxxxxxxxxx
Signed-off-by: Lasse Collin <lasse.collin@xxxxxxxxxxx>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
Cc: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
Cc: Palmer Dabbelt <palmer@xxxxxxxxxxx>
Cc: Albert Ou <aou@xxxxxxxxxxxxxxxxx>
Cc: Jules Maselbas <jmaselbas@xxxxxxxx>
Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
Cc: Joel Stanley <joel@xxxxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: Jubin Zhong <zhongjubin@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: Rui Li <me@xxxxxxxxx>
Cc: Sam James <sam@xxxxxxxxxx>
Cc: Simon Glass <sjg@xxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Will Deacon <will@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 arch/riscv/Kconfig       |    1 +
 arch/riscv/Makefile      |    6 ++++--
 arch/riscv/boot/Makefile |    3 +++
 3 files changed, 8 insertions(+), 2 deletions(-)

--- a/arch/riscv/boot/Makefile~riscv-boot-add-imagexz-support
+++ a/arch/riscv/boot/Makefile
@@ -64,6 +64,9 @@ $(obj)/Image.lzo: $(obj)/Image FORCE
 $(obj)/Image.zst: $(obj)/Image FORCE
 	$(call if_changed,zstd)
 
+$(obj)/Image.xz: $(obj)/Image FORCE
+	$(call if_changed,xzkern)
+
 $(obj)/loader.bin: $(obj)/loader FORCE
 	$(call if_changed,objcopy)
 
--- a/arch/riscv/Kconfig~riscv-boot-add-imagexz-support
+++ a/arch/riscv/Kconfig
@@ -156,6 +156,7 @@ config RISCV
 	select HAVE_KERNEL_LZO if !XIP_KERNEL && !EFI_ZBOOT
 	select HAVE_KERNEL_UNCOMPRESSED if !XIP_KERNEL && !EFI_ZBOOT
 	select HAVE_KERNEL_ZSTD if !XIP_KERNEL && !EFI_ZBOOT
+	select HAVE_KERNEL_XZ if !XIP_KERNEL && !EFI_ZBOOT
 	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KRETPROBES if !XIP_KERNEL
 	# https://github.com/ClangBuiltLinux/linux/issues/1881
--- a/arch/riscv/Makefile~riscv-boot-add-imagexz-support
+++ a/arch/riscv/Makefile
@@ -159,6 +159,7 @@ boot-image-$(CONFIG_KERNEL_LZ4)		:= Imag
 boot-image-$(CONFIG_KERNEL_LZMA)	:= Image.lzma
 boot-image-$(CONFIG_KERNEL_LZO)		:= Image.lzo
 boot-image-$(CONFIG_KERNEL_ZSTD)	:= Image.zst
+boot-image-$(CONFIG_KERNEL_XZ)		:= Image.xz
 ifdef CONFIG_RISCV_M_MODE
 boot-image-$(CONFIG_ARCH_CANAAN)	:= loader.bin
 endif
@@ -183,12 +184,12 @@ endif
 vdso-install-y			+= arch/riscv/kernel/vdso/vdso.so.dbg
 vdso-install-$(CONFIG_COMPAT)	+= arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg
 
-BOOT_TARGETS := Image Image.gz Image.bz2 Image.lz4 Image.lzma Image.lzo Image.zst loader loader.bin xipImage vmlinuz.efi
+BOOT_TARGETS := Image Image.gz Image.bz2 Image.lz4 Image.lzma Image.lzo Image.zst Image.xz loader loader.bin xipImage vmlinuz.efi
 
 all:	$(notdir $(KBUILD_IMAGE))
 
 loader.bin: loader
-Image.gz Image.bz2 Image.lz4 Image.lzma Image.lzo Image.zst loader xipImage vmlinuz.efi: Image
+Image.gz Image.bz2 Image.lz4 Image.lzma Image.lzo Image.zst Image.xz loader xipImage vmlinuz.efi: Image
 
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
@@ -225,6 +226,7 @@ define archhelp
   echo  '  Image.lzma	- Compressed kernel image (arch/riscv/boot/Image.lzma)'
   echo  '  Image.lzo	- Compressed kernel image (arch/riscv/boot/Image.lzo)'
   echo  '  Image.zst	- Compressed kernel image (arch/riscv/boot/Image.zst)'
+  echo  '  Image.xz	- Compressed kernel image (arch/riscv/boot/Image.xz)'
   echo  '  vmlinuz.efi	- Compressed EFI kernel image (arch/riscv/boot/vmlinuz.efi)'
   echo  '		  Default when CONFIG_EFI_ZBOOT=y'
   echo  '  xipImage	- Execute-in-place kernel image (arch/riscv/boot/xipImage)'
_

Patches currently in -mm which might be from lasse.collin@xxxxxxxxxxx are






[Index of Archives]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux