The quilt patch titled
Subject: powerpc/64e: drop MMU_FTR_TYPE_FSL_E checks in 64-bit code
has been removed from the -mm tree. Its filename was
powerpc-64e-drop-mmu_ftr_type_fsl_e-checks-in-64-bit-code.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Subject: powerpc/64e: drop MMU_FTR_TYPE_FSL_E checks in 64-bit code
Date: Tue, 2 Jul 2024 15:51:16 +0200
All 64-bit Book3E have MMU_FTR_TYPE_FSL_E, since A2 was removed, so remove
checks for it in 64-bit only code.
Link: https://lkml.kernel.org/r/2b0b0bc9752e6cece222e4e2050358da70bb631d.1719928057.git.christophe.leroy@xxxxxxxxxx
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
Cc: Jason Gunthorpe <jgg@xxxxxxxxxx>
Cc: Nicholas Piggin <npiggin@xxxxxxxxx>
Cc: Oscar Salvador <osalvador@xxxxxxx>
Cc: Peter Xu <peterx@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/powerpc/kernel/setup_64.c | 6 -
arch/powerpc/mm/nohash/tlb_64e.c | 101 +++++++++++------------------
2 files changed, 40 insertions(+), 67 deletions(-)
--- a/arch/powerpc/kernel/setup_64.c~powerpc-64e-drop-mmu_ftr_type_fsl_e-checks-in-64-bit-code
+++ a/arch/powerpc/kernel/setup_64.c
@@ -696,11 +696,7 @@ __init u64 ppc64_bolted_size(void)
{
#ifdef CONFIG_PPC_BOOK3E_64
/* Freescale BookE bolts the entire linear mapping */
- /* XXX: BookE ppc64_rma_limit setup seems to disagree? */
- if (early_mmu_has_feature(MMU_FTR_TYPE_FSL_E))
- return linear_map_top;
- /* Other BookE, we assume the first GB is bolted */
- return 1ul << 30;
+ return linear_map_top;
#else
/* BookS radix, does not take faults on linear mapping */
if (early_radix_enabled())
--- a/arch/powerpc/mm/nohash/tlb_64e.c~powerpc-64e-drop-mmu_ftr_type_fsl_e-checks-in-64-bit-code
+++ a/arch/powerpc/mm/nohash/tlb_64e.c
@@ -86,9 +86,8 @@ static void __init setup_page_sizes(void
int psize;
unsigned int mmucfg = mfspr(SPRN_MMUCFG);
- int fsl_mmu = mmu_has_feature(MMU_FTR_TYPE_FSL_E);
- if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
+ if ((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG);
unsigned int min_pg, max_pg;
@@ -115,7 +114,7 @@ static void __init setup_page_sizes(void
goto out;
}
- if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) {
+ if ((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) {
u32 tlb1cfg, tlb1ps;
tlb0cfg = mfspr(SPRN_TLB0CFG);
@@ -213,26 +212,24 @@ static void early_init_this_mmu(void)
}
mtspr(SPRN_MAS4, mas4);
- if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
- unsigned int num_cams;
- bool map = true;
+ unsigned int num_cams;
+ bool map = true;
- /* use a quarter of the TLBCAM for bolted linear map */
- num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
+ /* use a quarter of the TLBCAM for bolted linear map */
+ num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
- /*
- * Only do the mapping once per core, or else the
- * transient mapping would cause problems.
- */
+ /*
+ * Only do the mapping once per core, or else the
+ * transient mapping would cause problems.
+ */
#ifdef CONFIG_SMP
- if (hweight32(get_tensr()) > 1)
- map = false;
+ if (hweight32(get_tensr()) > 1)
+ map = false;
#endif
- if (map)
- linear_map_top = map_mem_in_cams(linear_map_top,
- num_cams, false, true);
- }
+ if (map)
+ linear_map_top = map_mem_in_cams(linear_map_top,
+ num_cams, false, true);
/* A sync won't hurt us after mucking around with
* the MMU configuration
@@ -242,16 +239,10 @@ static void early_init_this_mmu(void)
static void __init early_init_mmu_global(void)
{
- /* XXX This should be decided at runtime based on supported
- * page sizes in the TLB, but for now let's assume 16M is
- * always there and a good fit (which it probably is)
- *
+ /*
* Freescale booke only supports 4K pages in TLB0, so use that.
*/
- if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
- mmu_vmemmap_psize = MMU_PAGE_4K;
- else
- mmu_vmemmap_psize = MMU_PAGE_16M;
+ mmu_vmemmap_psize = MMU_PAGE_4K;
/* XXX This code only checks for TLB 0 capabilities and doesn't
* check what page size combos are supported by the HW. It
@@ -264,13 +255,10 @@ static void __init early_init_mmu_global
/* Look for HW tablewalk support */
setup_mmu_htw();
- if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
- if (book3e_htw_mode == PPC_HTW_NONE) {
- extlb_level_exc = EX_TLB_SIZE;
- patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
- patch_exception(0x1e0,
- exc_instruction_tlb_miss_bolted_book3e);
- }
+ if (book3e_htw_mode == PPC_HTW_NONE) {
+ extlb_level_exc = EX_TLB_SIZE;
+ patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
+ patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e);
}
/* Set the global containing the top of the linear mapping
@@ -283,16 +271,14 @@ static void __init early_init_mmu_global
static void __init early_mmu_set_memory_limit(void)
{
- if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
- /*
- * Limit memory so we dont have linear faults.
- * Unlike memblock_set_current_limit, which limits
- * memory available during early boot, this permanently
- * reduces the memory available to Linux. We need to
- * do this because highmem is not supported on 64-bit.
- */
- memblock_enforce_memory_limit(linear_map_top);
- }
+ /*
+ * Limit memory so we dont have linear faults.
+ * Unlike memblock_set_current_limit, which limits
+ * memory available during early boot, this permanently
+ * reduces the memory available to Linux. We need to
+ * do this because highmem is not supported on 64-bit.
+ */
+ memblock_enforce_memory_limit(linear_map_top);
memblock_set_current_limit(linear_map_top);
}
@@ -313,12 +299,8 @@ void early_init_mmu_secondary(void)
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
{
- /* On non-FSL Embedded 64-bit, we adjust the RMA size to match
- * the bolted TLB entry. We know for now that only 1G
- * entries are supported though that may eventually
- * change.
- *
- * on FSL Embedded 64-bit, usually all RAM is bolted, but with
+ /*
+ * On FSL Embedded 64-bit, usually all RAM is bolted, but with
* unusual memory sizes it's possible for some RAM to not be mapped
* (such RAM is not used at all by Linux, since we don't support
* highmem on 64-bit). We limit ppc64_rma_size to what would be
@@ -330,19 +312,14 @@ void setup_initial_memory_limit(phys_add
* We crop it to the size of the first MEMBLOCK to
* avoid going over total available memory just in case...
*/
- if (early_mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
- unsigned long linear_sz;
- unsigned int num_cams;
-
- /* use a quarter of the TLBCAM for bolted linear map */
- num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
-
- linear_sz = map_mem_in_cams(first_memblock_size, num_cams,
- true, true);
-
- ppc64_rma_size = min_t(u64, linear_sz, 0x40000000);
- } else
- ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
+ unsigned long linear_sz;
+ unsigned int num_cams;
+
+ /* use a quarter of the TLBCAM for bolted linear map */
+ num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
+
+ linear_sz = map_mem_in_cams(first_memblock_size, num_cams, true, true);
+ ppc64_rma_size = min_t(u64, linear_sz, 0x40000000);
/* Finally limit subsequent allocations */
memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
_
Patches currently in -mm which might be from mpe@xxxxxxxxxxxxxx are
