The patch titled
time: uninline jiffies.h
has been removed from the -mm tree. Its filename was
time-uninline-jiffiesh.patch
This patch was dropped because it is obsolete
------------------------------------------------------
Subject: time: uninline jiffies.h
From: Ingo Molnar <mingo@xxxxxxx>
There are load of fat functions hidden in jiffies.h. Uninline them. No code
changes.
Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
include/linux/jiffies.h | 223 ++------------------------------------
kernel/time.c | 218 +++++++++++++++++++++++++++++++++++++
2 files changed, 234 insertions(+), 207 deletions(-)
diff -puN include/linux/jiffies.h~time-uninline-jiffiesh include/linux/jiffies.h
--- a/include/linux/jiffies.h~time-uninline-jiffiesh
+++ a/include/linux/jiffies.h
@@ -259,215 +259,24 @@ static inline u64 get_jiffies_64(void)
#endif
/*
- * Convert jiffies to milliseconds and back.
- *
- * Avoid unnecessary multiplications/divisions in the
- * two most common HZ cases:
+ * Convert various time units to each other:
*/
-static inline unsigned int jiffies_to_msecs(const unsigned long j)
-{
-#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
- return (MSEC_PER_SEC / HZ) * j;
-#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
- return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC);
-#else
- return (j * MSEC_PER_SEC) / HZ;
-#endif
-}
-
-static inline unsigned int jiffies_to_usecs(const unsigned long j)
-{
-#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
- return (USEC_PER_SEC / HZ) * j;
-#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
- return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);
-#else
- return (j * USEC_PER_SEC) / HZ;
-#endif
-}
-
-static inline unsigned long msecs_to_jiffies(const unsigned int m)
-{
- if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
- return MAX_JIFFY_OFFSET;
-#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
- return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
-#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
- return m * (HZ / MSEC_PER_SEC);
-#else
- return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC;
-#endif
-}
-
-static inline unsigned long usecs_to_jiffies(const unsigned int u)
-{
- if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
- return MAX_JIFFY_OFFSET;
-#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
- return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);
-#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
- return u * (HZ / USEC_PER_SEC);
-#else
- return (u * HZ + USEC_PER_SEC - 1) / USEC_PER_SEC;
-#endif
-}
-
-/*
- * The TICK_NSEC - 1 rounds up the value to the next resolution. Note
- * that a remainder subtract here would not do the right thing as the
- * resolution values don't fall on second boundries. I.e. the line:
- * nsec -= nsec % TICK_NSEC; is NOT a correct resolution rounding.
- *
- * Rather, we just shift the bits off the right.
- *
- * The >> (NSEC_JIFFIE_SC - SEC_JIFFIE_SC) converts the scaled nsec
- * value to a scaled second value.
- */
-static __inline__ unsigned long
-timespec_to_jiffies(const struct timespec *value)
-{
- unsigned long sec = value->tv_sec;
- long nsec = value->tv_nsec + TICK_NSEC - 1;
-
- if (sec >= MAX_SEC_IN_JIFFIES){
- sec = MAX_SEC_IN_JIFFIES;
- nsec = 0;
- }
- return (((u64)sec * SEC_CONVERSION) +
- (((u64)nsec * NSEC_CONVERSION) >>
- (NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
-
-}
-
-static __inline__ void
-jiffies_to_timespec(const unsigned long jiffies, struct timespec *value)
-{
- /*
- * Convert jiffies to nanoseconds and separate with
- * one divide.
- */
- u64 nsec = (u64)jiffies * TICK_NSEC;
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_nsec);
-}
-
-/* Same for "timeval"
- *
- * Well, almost. The problem here is that the real system resolution is
- * in nanoseconds and the value being converted is in micro seconds.
- * Also for some machines (those that use HZ = 1024, in-particular),
- * there is a LARGE error in the tick size in microseconds.
-
- * The solution we use is to do the rounding AFTER we convert the
- * microsecond part. Thus the USEC_ROUND, the bits to be shifted off.
- * Instruction wise, this should cost only an additional add with carry
- * instruction above the way it was done above.
- */
-static __inline__ unsigned long
-timeval_to_jiffies(const struct timeval *value)
-{
- unsigned long sec = value->tv_sec;
- long usec = value->tv_usec;
-
- if (sec >= MAX_SEC_IN_JIFFIES){
- sec = MAX_SEC_IN_JIFFIES;
- usec = 0;
- }
- return (((u64)sec * SEC_CONVERSION) +
- (((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
- (USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
-}
-
-static __inline__ void
-jiffies_to_timeval(const unsigned long jiffies, struct timeval *value)
-{
- /*
- * Convert jiffies to nanoseconds and separate with
- * one divide.
- */
- u64 nsec = (u64)jiffies * TICK_NSEC;
- long tv_usec;
-
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tv_usec);
- tv_usec /= NSEC_PER_USEC;
- value->tv_usec = tv_usec;
-}
-
-/*
- * Convert jiffies/jiffies_64 to clock_t and back.
- */
-static inline clock_t jiffies_to_clock_t(long x)
-{
-#if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
- return x / (HZ / USER_HZ);
-#else
- u64 tmp = (u64)x * TICK_NSEC;
- do_div(tmp, (NSEC_PER_SEC / USER_HZ));
- return (long)tmp;
-#endif
-}
-
-static inline unsigned long clock_t_to_jiffies(unsigned long x)
-{
-#if (HZ % USER_HZ)==0
- if (x >= ~0UL / (HZ / USER_HZ))
- return ~0UL;
- return x * (HZ / USER_HZ);
-#else
- u64 jif;
-
- /* Don't worry about loss of precision here .. */
- if (x >= ~0UL / HZ * USER_HZ)
- return ~0UL;
-
- /* .. but do try to contain it here */
- jif = x * (u64) HZ;
- do_div(jif, USER_HZ);
- return jif;
-#endif
-}
-
-static inline u64 jiffies_64_to_clock_t(u64 x)
-{
-#if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
- do_div(x, HZ / USER_HZ);
-#else
- /*
- * There are better ways that don't overflow early,
- * but even this doesn't overflow in hundreds of years
- * in 64 bits, so..
- */
- x *= TICK_NSEC;
- do_div(x, (NSEC_PER_SEC / USER_HZ));
-#endif
- return x;
-}
-
-static inline u64 nsec_to_clock_t(u64 x)
-{
-#if (NSEC_PER_SEC % USER_HZ) == 0
- do_div(x, (NSEC_PER_SEC / USER_HZ));
-#elif (USER_HZ % 512) == 0
- x *= USER_HZ/512;
- do_div(x, (NSEC_PER_SEC / 512));
-#else
- /*
- * max relative error 5.7e-8 (1.8s per year) for USER_HZ <= 1024,
- * overflow after 64.99 years.
- * exact for HZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
- */
- x *= 9;
- do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (USER_HZ/2))
- / USER_HZ));
-#endif
- return x;
-}
+extern unsigned int jiffies_to_msecs(const unsigned long j);
+extern unsigned int jiffies_to_usecs(const unsigned long j);
+extern unsigned long msecs_to_jiffies(const unsigned int m);
+extern unsigned long usecs_to_jiffies(const unsigned int u);
+extern unsigned long timespec_to_jiffies(const struct timespec *value);
+extern void jiffies_to_timespec(const unsigned long jiffies,
+ struct timespec *value);
+extern unsigned long timeval_to_jiffies(const struct timeval *value);
+extern void jiffies_to_timeval(const unsigned long jiffies,
+ struct timeval *value);
+extern clock_t jiffies_to_clock_t(long x);
+extern unsigned long clock_t_to_jiffies(unsigned long x);
+extern u64 jiffies_64_to_clock_t(u64 x);
+extern u64 nsec_to_clock_t(u64 x);
+extern int nsec_to_timestamp(char *s, u64 t);
-static inline int nsec_to_timestamp(char *s, u64 t)
-{
- unsigned long nsec_rem = do_div(t, NSEC_PER_SEC);
- return sprintf(s, "[%5lu.%06lu]", (unsigned long)t,
- nsec_rem/NSEC_PER_USEC);
-}
#define TIMESTAMP_SIZE 30
#endif
diff -puN kernel/time.c~time-uninline-jiffiesh kernel/time.c
--- a/kernel/time.c~time-uninline-jiffiesh
+++ a/kernel/time.c
@@ -470,6 +470,224 @@ struct timeval ns_to_timeval(const s64 n
return tv;
}
+/*
+ * Convert jiffies to milliseconds and back.
+ *
+ * Avoid unnecessary multiplications/divisions in the
+ * two most common HZ cases:
+ */
+unsigned int jiffies_to_msecs(const unsigned long j)
+{
+#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
+ return (MSEC_PER_SEC / HZ) * j;
+#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
+ return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC);
+#else
+ return (j * MSEC_PER_SEC) / HZ;
+#endif
+}
+EXPORT_SYMBOL(jiffies_to_msecs);
+
+unsigned int jiffies_to_usecs(const unsigned long j)
+{
+#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
+ return (USEC_PER_SEC / HZ) * j;
+#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
+ return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);
+#else
+ return (j * USEC_PER_SEC) / HZ;
+#endif
+}
+EXPORT_SYMBOL(jiffies_to_usecs);
+
+unsigned long msecs_to_jiffies(const unsigned int m)
+{
+ if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
+ return MAX_JIFFY_OFFSET;
+#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
+ return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
+#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
+ return m * (HZ / MSEC_PER_SEC);
+#else
+ return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC;
+#endif
+}
+EXPORT_SYMBOL(msecs_to_jiffies);
+
+unsigned long usecs_to_jiffies(const unsigned int u)
+{
+ if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
+ return MAX_JIFFY_OFFSET;
+#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
+ return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);
+#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
+ return u * (HZ / USEC_PER_SEC);
+#else
+ return (u * HZ + USEC_PER_SEC - 1) / USEC_PER_SEC;
+#endif
+}
+EXPORT_SYMBOL(usecs_to_jiffies);
+
+/*
+ * The TICK_NSEC - 1 rounds up the value to the next resolution. Note
+ * that a remainder subtract here would not do the right thing as the
+ * resolution values don't fall on second boundries. I.e. the line:
+ * nsec -= nsec % TICK_NSEC; is NOT a correct resolution rounding.
+ *
+ * Rather, we just shift the bits off the right.
+ *
+ * The >> (NSEC_JIFFIE_SC - SEC_JIFFIE_SC) converts the scaled nsec
+ * value to a scaled second value.
+ */
+unsigned long
+timespec_to_jiffies(const struct timespec *value)
+{
+ unsigned long sec = value->tv_sec;
+ long nsec = value->tv_nsec + TICK_NSEC - 1;
+
+ if (sec >= MAX_SEC_IN_JIFFIES){
+ sec = MAX_SEC_IN_JIFFIES;
+ nsec = 0;
+ }
+ return (((u64)sec * SEC_CONVERSION) +
+ (((u64)nsec * NSEC_CONVERSION) >>
+ (NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
+
+}
+EXPORT_SYMBOL(timespec_to_jiffies);
+
+void
+jiffies_to_timespec(const unsigned long jiffies, struct timespec *value)
+{
+ /*
+ * Convert jiffies to nanoseconds and separate with
+ * one divide.
+ */
+ u64 nsec = (u64)jiffies * TICK_NSEC;
+ value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_nsec);
+}
+
+/* Same for "timeval"
+ *
+ * Well, almost. The problem here is that the real system resolution is
+ * in nanoseconds and the value being converted is in micro seconds.
+ * Also for some machines (those that use HZ = 1024, in-particular),
+ * there is a LARGE error in the tick size in microseconds.
+
+ * The solution we use is to do the rounding AFTER we convert the
+ * microsecond part. Thus the USEC_ROUND, the bits to be shifted off.
+ * Instruction wise, this should cost only an additional add with carry
+ * instruction above the way it was done above.
+ */
+unsigned long
+timeval_to_jiffies(const struct timeval *value)
+{
+ unsigned long sec = value->tv_sec;
+ long usec = value->tv_usec;
+
+ if (sec >= MAX_SEC_IN_JIFFIES){
+ sec = MAX_SEC_IN_JIFFIES;
+ usec = 0;
+ }
+ return (((u64)sec * SEC_CONVERSION) +
+ (((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
+ (USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
+}
+
+void jiffies_to_timeval(const unsigned long jiffies, struct timeval *value)
+{
+ /*
+ * Convert jiffies to nanoseconds and separate with
+ * one divide.
+ */
+ u64 nsec = (u64)jiffies * TICK_NSEC;
+ long tv_usec;
+
+ value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tv_usec);
+ tv_usec /= NSEC_PER_USEC;
+ value->tv_usec = tv_usec;
+}
+
+/*
+ * Convert jiffies/jiffies_64 to clock_t and back.
+ */
+clock_t jiffies_to_clock_t(long x)
+{
+#if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
+ return x / (HZ / USER_HZ);
+#else
+ u64 tmp = (u64)x * TICK_NSEC;
+ do_div(tmp, (NSEC_PER_SEC / USER_HZ));
+ return (long)tmp;
+#endif
+}
+EXPORT_SYMBOL(jiffies_to_clock_t);
+
+unsigned long clock_t_to_jiffies(unsigned long x)
+{
+#if (HZ % USER_HZ)==0
+ if (x >= ~0UL / (HZ / USER_HZ))
+ return ~0UL;
+ return x * (HZ / USER_HZ);
+#else
+ u64 jif;
+
+ /* Don't worry about loss of precision here .. */
+ if (x >= ~0UL / HZ * USER_HZ)
+ return ~0UL;
+
+ /* .. but do try to contain it here */
+ jif = x * (u64) HZ;
+ do_div(jif, USER_HZ);
+ return jif;
+#endif
+}
+EXPORT_SYMBOL(clock_t_to_jiffies);
+
+u64 jiffies_64_to_clock_t(u64 x)
+{
+#if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
+ do_div(x, HZ / USER_HZ);
+#else
+ /*
+ * There are better ways that don't overflow early,
+ * but even this doesn't overflow in hundreds of years
+ * in 64 bits, so..
+ */
+ x *= TICK_NSEC;
+ do_div(x, (NSEC_PER_SEC / USER_HZ));
+#endif
+ return x;
+}
+
+EXPORT_SYMBOL(jiffies_64_to_clock_t);
+
+u64 nsec_to_clock_t(u64 x)
+{
+#if (NSEC_PER_SEC % USER_HZ) == 0
+ do_div(x, (NSEC_PER_SEC / USER_HZ));
+#elif (USER_HZ % 512) == 0
+ x *= USER_HZ/512;
+ do_div(x, (NSEC_PER_SEC / 512));
+#else
+ /*
+ * max relative error 5.7e-8 (1.8s per year) for USER_HZ <= 1024,
+ * overflow after 64.99 years.
+ * exact for HZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
+ */
+ x *= 9;
+ do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (USER_HZ/2)) /
+ USER_HZ));
+#endif
+ return x;
+}
+
+int nsec_to_timestamp(char *s, u64 t)
+{
+ unsigned long nsec_rem = do_div(t, NSEC_PER_SEC);
+ return sprintf(s, "[%5lu.%06lu]", (unsigned long)t,
+ nsec_rem/NSEC_PER_USEC);
+}
__attribute__((weak)) unsigned long long timestamp_clock(void)
{
return sched_clock();
_
Patches currently in -mm which might be from mingo@xxxxxxx are
origin.patch
debug-add-sysrq_always_enabled-boot-option.patch
lockdep-filter-off-by-default.patch
lockdep-improve-verbose-messages.patch
lockdep-improve-lockdep_reset.patch
lockdep-clean-up-very_verbose-define.patch
lockdep-use-chain-hash-on-config_debug_lockdep-too.patch
lockdep-print-irq-trace-info-on-asserts.patch
lockdep-fix-possible-races-while-disabling-lock-debugging.patch
optimize-calc_load.patch
acpi-i686-x86_64-fix-laptop-bootup-hang-in-init_acpi.patch
revert-i386-fix-the-verify_quirk_intel_irqbalance.patch
revert-x86_64-mm-add-genapic_force.patch
revert-x86_64-mm-fix-the-irqbalance-quirk-for-e7320-e7520-e7525.patch
convert-i386-pda-code-to-use-%fs.patch
convert-i386-pda-code-to-use-%fs-fixes.patch
genapic-optimize-fix-apic-mode-setup-2.patch
genapic-always-use-physical-delivery-mode-on-8-cpus.patch
genapic-remove-es7000-workaround.patch
genapic-remove-clustered-apic-mode.patch
genapic-default-to-physical-mode-on-hotplug-cpu-kernels.patch
x86_64-do-not-enable-the-nmi-watchdog-by-default.patch
cpuset-remove-sched-domain-hooks-from-cpusets.patch
gtod-uninline-jiffiesh.patch
gtod-fix-multiple-conversion-bugs-in-msecs_to_jiffies.patch
gtod-fix-timeout-overflow.patch
gtod-persistent-clock-support-core.patch
gtod-persistent-clock-support-i386.patch
dynticks-uninline-irq_enter.patch
dynticks-extend-next_timer_interrupt-to-use-a-reference-jiffie.patch
hrtimers-namespace-and-enum-cleanup.patch
hrtimers-clean-up-locking.patch
hrtimers-add-state-tracking.patch
hrtimers-clean-up-callback-tracking.patch
hrtimers-move-and-add-documentation.patch
acpi-include-fix.patch
acpi-keep-track-of-timer-broadcast.patch
acpi-add-state-propagation-for-dynamic-broadcasting.patch
acpi-cleanups-allow-early-access-to-pmtimer.patch
i386-apic-clean-up-the-apic-code.patch
clockevents-core.patch
clockevents-i386-drivers.patch
clockevents-i386-hpet-driver.patch
i386-apic-rework-and-fix-local-apic-calibration.patch
high-res-timers-core.patch
high-res-timers-core-do-itimer-rearming-in-process-context.patch
high-res-timers-allow-tsc-clocksource-if-pmtimer-present.patch
dynticks-core.patch
dynticks-add-nohz-stats-to-proc-stat.patch
dynticks-i386-support-idle-handler-callbacks.patch
dynticks-i386-prepare-nmi-watchdog.patch
high-res-timers-dynticks-i386-support-enable-in-kconfig.patch
debugging-feature-add-proc-timer_stat.patch
debugging-feature-proc-timer_list.patch
workqueue-dont-hold-workqueue_mutex-in-flush_scheduled_work.patch
mm-only-sched-add-a-few-scheduler-event-counters.patch
sched-add-above-background-load-function.patch
mm-implement-swap-prefetching.patch
mm-implement-swap-prefetching-use-ctl_unnumbered.patch
sched-cleanup-remove-task_t-convert-to-struct-task_struct-prefetch.patch
detect-atomic-counter-underflows.patch
debug-shared-irqs.patch
make-frame_pointer-default=y.patch
mutex-subsystem-synchro-test-module.patch
vdso-print-fatal-signals.patch
vdso-improve-print_fatal_signals-support-by-adding-memory-maps.patch
vdso-print-fatal-signals-use-ctl_unnumbered.patch
lockdep-show-held-locks-when-showing-a-stackdump.patch
lockdep-show-held-locks-when-showing-a-stackdump-fix.patch
lockdep-show-held-locks-when-showing-a-stackdump-fix-2.patch
kmap_atomic-debugging.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
