The patch titled
Subject: xz: adjust arch-specific options for better kernel compression
has been added to the -mm mm-nonmm-unstable branch. Its filename is
xz-adjust-arch-specific-options-for-better-kernel-compression.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/xz-adjust-arch-specific-options-for-better-kernel-compression.patch
This patch will later appear in the mm-nonmm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Lasse Collin <lasse.collin@xxxxxxxxxxx>
Subject: xz: adjust arch-specific options for better kernel compression
Date: Wed, 20 Mar 2024 20:38:44 +0200
Use LZMA2 options that match the arch-specific alignment of instructions.
This change reduces compressed kernel size 0-2 % depending on the arch.
On 1-byte-aligned x86 it makes no difference and on 4-byte-aligned archs
it helps the most.
Use the ARM-Thumb filter for ARM-Thumb2 kernels. This reduces compressed
kernel size about 5 %.[1] Previously such kernels were compressed using
the ARM filter which didn't do anything useful with ARM-Thumb2 code.
Add BCJ filter support for ARM64 and RISC-V. On ARM64 the compressed
kernel size is reduced about 5 % and on RISC-V by 7-8 % compared to
unfiltered XZ or plain LZMA. However:
- arch/arm64/boot/Makefile and arch/riscv/boot/Makefile don't include
the build rule (two lines) for XZ support even though they support
six other compressors. It would be trivial to add the rule but boot
loaders would need XZ support too.
- A new enough version of the xz tool is required: 5.4.0 for ARM64 and
5.6.0 for RISC-V. With an old xz version a message is printed to
standard error and the kernel is compressed without the filter.
Update lib/decompress_unxz.c to match the changes to xz_wrap.sh.
Update the CONFIG_KERNEL_XZ help text in init/Kconfig:
- Add the RISC-V and ARM64 filters.
- Clarify that the PowerPC filter is for big endian only.
- Omit IA-64.
Link: https://lore.kernel.org/lkml/1637379771-39449-1-git-send-email-zhongjubin@xxxxxxxxxx/ [1]
Link: https://lkml.kernel.org/r/20240320183846.19475-12-lasse.collin@xxxxxxxxxxx
Signed-off-by: Lasse Collin <lasse.collin@xxxxxxxxxxx>
Reviewed-by: Jia Tan <jiat0218@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
init/Kconfig | 5 -
lib/decompress_unxz.c | 14 +++
scripts/xz_wrap.sh | 141 ++++++++++++++++++++++++++++++++++++++--
3 files changed, 151 insertions(+), 9 deletions(-)
--- a/init/Kconfig~xz-adjust-arch-specific-options-for-better-kernel-compression
+++ a/init/Kconfig
@@ -308,8 +308,9 @@ config KERNEL_XZ
BCJ filters which can improve compression ratio of executable
code. The size of the kernel is about 30% smaller with XZ in
comparison to gzip. On architectures for which there is a BCJ
- filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ
- will create a few percent smaller kernel than plain LZMA.
+ filter (i386, x86_64, ARM, ARM64, RISC-V, big endian PowerPC,
+ and SPARC), XZ will create a few percent smaller kernel than
+ plain LZMA.
The speed is about the same as with LZMA: The decompression
speed of XZ is better than that of bzip2 but worse than gzip
--- a/lib/decompress_unxz.c~xz-adjust-arch-specific-options-for-better-kernel-compression
+++ a/lib/decompress_unxz.c
@@ -126,11 +126,21 @@
#ifdef CONFIG_X86
# define XZ_DEC_X86
#endif
-#ifdef CONFIG_PPC
+#if defined(CONFIG_PPC) && defined(CONFIG_CPU_BIG_ENDIAN)
# define XZ_DEC_POWERPC
#endif
#ifdef CONFIG_ARM
-# define XZ_DEC_ARM
+# ifdef CONFIG_THUMB2_KERNEL
+# define XZ_DEC_ARMTHUMB
+# else
+# define XZ_DEC_ARM
+# endif
+#endif
+#ifdef CONFIG_ARM64
+# define XZ_DEC_ARM64
+#endif
+#ifdef CONFIG_RISCV
+# define XZ_DEC_RISCV
#endif
#ifdef CONFIG_SPARC
# define XZ_DEC_SPARC
--- a/scripts/xz_wrap.sh~xz-adjust-arch-specific-options-for-better-kernel-compression
+++ a/scripts/xz_wrap.sh
@@ -6,14 +6,145 @@
#
# Author: Lasse Collin <lasse.collin@xxxxxxxxxxx>
+# This has specialized settings for the following archs. However,
+# XZ-compressed kernel isn't currently supported on every listed arch.
+#
+# Arch Align Notes
+# arm 2/4 ARM and ARM-Thumb2
+# arm64 4
+# csky 2
+# loongarch 4
+# mips 2/4 MicroMIPS is 2-byte aligned
+# parisc 4
+# powerpc 4 Uses its own wrapper for compressors instead of this.
+# riscv 2/4
+# s390 2
+# sh 2
+# sparc 4
+# x86 1
+
+# A few archs use 2-byte or 4-byte aligned instructions depending on
+# the kernel config. This function is used to check if the relevant
+# config option is set to "y".
+is_enabled()
+{
+ grep -q "^$1=y$" include/config/auto.conf
+}
+
+# Set XZ_VERSION (and LIBLZMA_VERSION). This is needed to disable features
+# that aren't available in old XZ Utils versions.
+eval "$($XZ --robot --version)" || exit
+
+# Assume that no BCJ filter is available.
BCJ=
-LZMA2OPTS=
+# Set the instruction alignment to 1, 2, or 4 bytes.
+#
+# Set the BCJ filter if one is available.
+# It must match the #ifdef usage in lib/decompress_unxz.c.
case $SRCARCH in
- x86) BCJ=--x86 ;;
- powerpc) BCJ=--powerpc ;;
- arm) BCJ=--arm ;;
- sparc) BCJ=--sparc ;;
+ arm)
+ if is_enabled CONFIG_THUMB2_KERNEL; then
+ ALIGN=2
+ BCJ=--armthumb
+ else
+ ALIGN=4
+ BCJ=--arm
+ fi
+ ;;
+
+ arm64)
+ ALIGN=4
+
+ # ARM64 filter was added in XZ Utils 5.4.0.
+ if [ "$XZ_VERSION" -ge 50040002 ]; then
+ BCJ=--arm64
+ else
+ echo "$0: Upgrading to xz >= 5.4.0" \
+ "would enable the ARM64 filter" \
+ "for better compression" >&2
+ fi
+ ;;
+
+ csky)
+ ALIGN=2
+ ;;
+
+ loongarch)
+ ALIGN=4
+ ;;
+
+ mips)
+ if is_enabled CONFIG_CPU_MICROMIPS; then
+ ALIGN=2
+ else
+ ALIGN=4
+ fi
+ ;;
+
+ parisc)
+ ALIGN=4
+ ;;
+
+ powerpc)
+ ALIGN=4
+
+ # The filter is only for big endian instruction encoding.
+ if is_enabled CONFIG_CPU_BIG_ENDIAN; then
+ BCJ=--powerpc
+ fi
+ ;;
+
+ riscv)
+ if is_enabled CONFIG_RISCV_ISA_C; then
+ ALIGN=2
+ else
+ ALIGN=4
+ fi
+
+ # RISC-V filter was added in XZ Utils 5.6.0.
+ if [ "$XZ_VERSION" -ge 50060002 ]; then
+ BCJ=--riscv
+ else
+ echo "$0: Upgrading to xz >= 5.6.0" \
+ "would enable the RISC-V filter" \
+ "for better compression" >&2
+ fi
+ ;;
+
+ s390)
+ ALIGN=2
+ ;;
+
+ sh)
+ ALIGN=2
+ ;;
+
+ sparc)
+ ALIGN=4
+ BCJ=--sparc
+ ;;
+
+ x86)
+ ALIGN=1
+ BCJ=--x86
+ ;;
+
+ *)
+ echo "$0: Arch-specific tuning is missing for '$SRCARCH'" >&2
+
+ # Guess 2-byte-aligned instructions. Guessing too low
+ # should hurt less than guessing too high.
+ ALIGN=2
+ ;;
+esac
+
+# Select the LZMA2 options matching the instruction alignment.
+case $ALIGN in
+ 1) LZMA2OPTS= ;;
+ 2) LZMA2OPTS=lp=1 ;;
+ 4) LZMA2OPTS=lp=2,lc=2 ;;
+ *) echo "$0: ALIGN wrong or missing" >&2; exit 1 ;;
esac
# Use single-threaded mode because it compresses a little better
_
Patches currently in -mm which might be from lasse.collin@xxxxxxxxxxx are
maintainers-add-xz-embedded-maintainers.patch
licenses-add-0bsd-license-text.patch
xz-switch-from-public-domain-to-bsd-zero-clause-license-0bsd.patch
xz-documentation-staging-xzrst-revise-thoroughly.patch
xz-fix-comments-and-coding-style.patch
xz-cleanup-crc32-edits-from-2018.patch
xz-optimize-for-loop-conditions-in-the-bcj-decoders.patch
xz-add-arm64-bcj-filter.patch
xz-add-risc-v-bcj-filter.patch
xz-use-128-mib-dictionary-and-force-single-threaded-mode.patch
xz-adjust-arch-specific-options-for-better-kernel-compression.patch
