The quilt patch titled
Subject: mm: zswap: function ordering: pool params
has been removed from the -mm tree. Its filename was
mm-zswap-function-ordering-pool-params.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Johannes Weiner <hannes@xxxxxxxxxxx>
Subject: mm: zswap: function ordering: pool params
Date: Mon, 29 Jan 2024 20:36:49 -0500
Patch series "mm: zswap: cleanups".
Cleanups and maintenance items that accumulated while reviewing zswap
patches.
This patch (of 20):
The parameters primarily control pool attributes. Move those
operations up to the pool section.
Link: https://lkml.kernel.org/r/20240130014208.565554-1-hannes@xxxxxxxxxxx
Link: https://lkml.kernel.org/r/20240130014208.565554-14-hannes@xxxxxxxxxxx
Signed-off-by: Johannes Weiner <hannes@xxxxxxxxxxx>
Reviewed-by: Nhat Pham <nphamcs@xxxxxxxxx>
Cc: Chengming Zhou <zhouchengming@xxxxxxxxxxxxx>
Cc: Yosry Ahmed <yosryahmed@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
mm/zswap.c | 312 +++++++++++++++++++++++++--------------------------
1 file changed, 156 insertions(+), 156 deletions(-)
--- a/mm/zswap.c~mm-zswap-function-ordering-pool-params
+++ a/mm/zswap.c
@@ -590,6 +590,162 @@ static struct zswap_pool *zswap_pool_fin
return NULL;
}
+/*********************************
+* param callbacks
+**********************************/
+
+static bool zswap_pool_changed(const char *s, const struct kernel_param *kp)
+{
+ /* no change required */
+ if (!strcmp(s, *(char **)kp->arg) && zswap_has_pool)
+ return false;
+ return true;
+}
+
+/* val must be a null-terminated string */
+static int __zswap_param_set(const char *val, const struct kernel_param *kp,
+ char *type, char *compressor)
+{
+ struct zswap_pool *pool, *put_pool = NULL;
+ char *s = strstrip((char *)val);
+ int ret = 0;
+ bool new_pool = false;
+
+ mutex_lock(&zswap_init_lock);
+ switch (zswap_init_state) {
+ case ZSWAP_UNINIT:
+ /* if this is load-time (pre-init) param setting,
+ * don't create a pool; that's done during init.
+ */
+ ret = param_set_charp(s, kp);
+ break;
+ case ZSWAP_INIT_SUCCEED:
+ new_pool = zswap_pool_changed(s, kp);
+ break;
+ case ZSWAP_INIT_FAILED:
+ pr_err("can't set param, initialization failed\n");
+ ret = -ENODEV;
+ }
+ mutex_unlock(&zswap_init_lock);
+
+ /* no need to create a new pool, return directly */
+ if (!new_pool)
+ return ret;
+
+ if (!type) {
+ if (!zpool_has_pool(s)) {
+ pr_err("zpool %s not available\n", s);
+ return -ENOENT;
+ }
+ type = s;
+ } else if (!compressor) {
+ if (!crypto_has_acomp(s, 0, 0)) {
+ pr_err("compressor %s not available\n", s);
+ return -ENOENT;
+ }
+ compressor = s;
+ } else {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ spin_lock(&zswap_pools_lock);
+
+ pool = zswap_pool_find_get(type, compressor);
+ if (pool) {
+ zswap_pool_debug("using existing", pool);
+ WARN_ON(pool == zswap_pool_current());
+ list_del_rcu(&pool->list);
+ }
+
+ spin_unlock(&zswap_pools_lock);
+
+ if (!pool)
+ pool = zswap_pool_create(type, compressor);
+
+ if (pool)
+ ret = param_set_charp(s, kp);
+ else
+ ret = -EINVAL;
+
+ spin_lock(&zswap_pools_lock);
+
+ if (!ret) {
+ put_pool = zswap_pool_current();
+ list_add_rcu(&pool->list, &zswap_pools);
+ zswap_has_pool = true;
+ } else if (pool) {
+ /* add the possibly pre-existing pool to the end of the pools
+ * list; if it's new (and empty) then it'll be removed and
+ * destroyed by the put after we drop the lock
+ */
+ list_add_tail_rcu(&pool->list, &zswap_pools);
+ put_pool = pool;
+ }
+
+ spin_unlock(&zswap_pools_lock);
+
+ if (!zswap_has_pool && !pool) {
+ /* if initial pool creation failed, and this pool creation also
+ * failed, maybe both compressor and zpool params were bad.
+ * Allow changing this param, so pool creation will succeed
+ * when the other param is changed. We already verified this
+ * param is ok in the zpool_has_pool() or crypto_has_acomp()
+ * checks above.
+ */
+ ret = param_set_charp(s, kp);
+ }
+
+ /* drop the ref from either the old current pool,
+ * or the new pool we failed to add
+ */
+ if (put_pool)
+ zswap_pool_put(put_pool);
+
+ return ret;
+}
+
+static int zswap_compressor_param_set(const char *val,
+ const struct kernel_param *kp)
+{
+ return __zswap_param_set(val, kp, zswap_zpool_type, NULL);
+}
+
+static int zswap_zpool_param_set(const char *val,
+ const struct kernel_param *kp)
+{
+ return __zswap_param_set(val, kp, NULL, zswap_compressor);
+}
+
+static int zswap_enabled_param_set(const char *val,
+ const struct kernel_param *kp)
+{
+ int ret = -ENODEV;
+
+ /* if this is load-time (pre-init) param setting, only set param. */
+ if (system_state != SYSTEM_RUNNING)
+ return param_set_bool(val, kp);
+
+ mutex_lock(&zswap_init_lock);
+ switch (zswap_init_state) {
+ case ZSWAP_UNINIT:
+ if (zswap_setup())
+ break;
+ fallthrough;
+ case ZSWAP_INIT_SUCCEED:
+ if (!zswap_has_pool)
+ pr_err("can't enable, no pool configured\n");
+ else
+ ret = param_set_bool(val, kp);
+ break;
+ case ZSWAP_INIT_FAILED:
+ pr_err("can't enable, initialization failed\n");
+ }
+ mutex_unlock(&zswap_init_lock);
+
+ return ret;
+}
+
/* should be called under RCU */
#ifdef CONFIG_MEMCG
static inline struct mem_cgroup *mem_cgroup_from_entry(struct zswap_entry *entry)
@@ -1162,162 +1318,6 @@ resched:
zswap_pool_put(pool);
}
-/*********************************
-* param callbacks
-**********************************/
-
-static bool zswap_pool_changed(const char *s, const struct kernel_param *kp)
-{
- /* no change required */
- if (!strcmp(s, *(char **)kp->arg) && zswap_has_pool)
- return false;
- return true;
-}
-
-/* val must be a null-terminated string */
-static int __zswap_param_set(const char *val, const struct kernel_param *kp,
- char *type, char *compressor)
-{
- struct zswap_pool *pool, *put_pool = NULL;
- char *s = strstrip((char *)val);
- int ret = 0;
- bool new_pool = false;
-
- mutex_lock(&zswap_init_lock);
- switch (zswap_init_state) {
- case ZSWAP_UNINIT:
- /* if this is load-time (pre-init) param setting,
- * don't create a pool; that's done during init.
- */
- ret = param_set_charp(s, kp);
- break;
- case ZSWAP_INIT_SUCCEED:
- new_pool = zswap_pool_changed(s, kp);
- break;
- case ZSWAP_INIT_FAILED:
- pr_err("can't set param, initialization failed\n");
- ret = -ENODEV;
- }
- mutex_unlock(&zswap_init_lock);
-
- /* no need to create a new pool, return directly */
- if (!new_pool)
- return ret;
-
- if (!type) {
- if (!zpool_has_pool(s)) {
- pr_err("zpool %s not available\n", s);
- return -ENOENT;
- }
- type = s;
- } else if (!compressor) {
- if (!crypto_has_acomp(s, 0, 0)) {
- pr_err("compressor %s not available\n", s);
- return -ENOENT;
- }
- compressor = s;
- } else {
- WARN_ON(1);
- return -EINVAL;
- }
-
- spin_lock(&zswap_pools_lock);
-
- pool = zswap_pool_find_get(type, compressor);
- if (pool) {
- zswap_pool_debug("using existing", pool);
- WARN_ON(pool == zswap_pool_current());
- list_del_rcu(&pool->list);
- }
-
- spin_unlock(&zswap_pools_lock);
-
- if (!pool)
- pool = zswap_pool_create(type, compressor);
-
- if (pool)
- ret = param_set_charp(s, kp);
- else
- ret = -EINVAL;
-
- spin_lock(&zswap_pools_lock);
-
- if (!ret) {
- put_pool = zswap_pool_current();
- list_add_rcu(&pool->list, &zswap_pools);
- zswap_has_pool = true;
- } else if (pool) {
- /* add the possibly pre-existing pool to the end of the pools
- * list; if it's new (and empty) then it'll be removed and
- * destroyed by the put after we drop the lock
- */
- list_add_tail_rcu(&pool->list, &zswap_pools);
- put_pool = pool;
- }
-
- spin_unlock(&zswap_pools_lock);
-
- if (!zswap_has_pool && !pool) {
- /* if initial pool creation failed, and this pool creation also
- * failed, maybe both compressor and zpool params were bad.
- * Allow changing this param, so pool creation will succeed
- * when the other param is changed. We already verified this
- * param is ok in the zpool_has_pool() or crypto_has_acomp()
- * checks above.
- */
- ret = param_set_charp(s, kp);
- }
-
- /* drop the ref from either the old current pool,
- * or the new pool we failed to add
- */
- if (put_pool)
- zswap_pool_put(put_pool);
-
- return ret;
-}
-
-static int zswap_compressor_param_set(const char *val,
- const struct kernel_param *kp)
-{
- return __zswap_param_set(val, kp, zswap_zpool_type, NULL);
-}
-
-static int zswap_zpool_param_set(const char *val,
- const struct kernel_param *kp)
-{
- return __zswap_param_set(val, kp, NULL, zswap_compressor);
-}
-
-static int zswap_enabled_param_set(const char *val,
- const struct kernel_param *kp)
-{
- int ret = -ENODEV;
-
- /* if this is load-time (pre-init) param setting, only set param. */
- if (system_state != SYSTEM_RUNNING)
- return param_set_bool(val, kp);
-
- mutex_lock(&zswap_init_lock);
- switch (zswap_init_state) {
- case ZSWAP_UNINIT:
- if (zswap_setup())
- break;
- fallthrough;
- case ZSWAP_INIT_SUCCEED:
- if (!zswap_has_pool)
- pr_err("can't enable, no pool configured\n");
- else
- ret = param_set_bool(val, kp);
- break;
- case ZSWAP_INIT_FAILED:
- pr_err("can't enable, initialization failed\n");
- }
- mutex_unlock(&zswap_init_lock);
-
- return ret;
-}
-
static bool zswap_compress(struct folio *folio, struct zswap_entry *entry)
{
struct crypto_acomp_ctx *acomp_ctx;
_
Patches currently in -mm which might be from hannes@xxxxxxxxxxx are
