The patch titled
mbxfb: Add YUV video overlay support
has been removed from the -mm tree. Its filename was
mbxfb-add-yuv-video-overlay-support.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: mbxfb: Add YUV video overlay support
From: Raphael Assenat <raph@xxxxxx>
This patch adds a way to create and use the video plane (YUV overlay) and
scaling video scaling features of the chip.
The overlay is configured, resized and modified using a device specific
ioctl.
Also included in this patch:
- If no platform data was passed, print an error and exit instead of crashing.
- Added a write_reg(_dly) macro. This improves readability when
manipulating chip registers. (no more udelay() after each write).
- Comments about some issues.
Signed-off-by: Raphael Assenat <raph@xxxxxx>
Cc: "Antonino A. Daplas" <adaplas@xxxxxxx>
Acked-by: James Simmons <jsimmons@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/video/mbx/mbxfb.c | 361 +++++++++++++++++++++++++++---------
include/video/mbxfb.h | 31 +++
2 files changed, 303 insertions(+), 89 deletions(-)
diff -puN drivers/video/mbx/mbxfb.c~mbxfb-add-yuv-video-overlay-support drivers/video/mbx/mbxfb.c
--- a/drivers/video/mbx/mbxfb.c~mbxfb-add-yuv-video-overlay-support
+++ a/drivers/video/mbx/mbxfb.c
@@ -1,8 +1,14 @@
/*
* linux/drivers/video/mbx/mbxfb.c
*
+ * Copyright (C) 2006 8D Technologies inc
+ * Raphael Assenat <raph@xxxxxx>
+ * - Added video overlay support
+ * - Various improvements
+ *
* Copyright (C) 2006 Compulab, Ltd.
* Mike Rapoport <mike@xxxxxxxxxxxxxx>
+ * - Creation of driver
*
* Based on pxafb.c
*
@@ -19,6 +25,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/uaccess.h>
#include <asm/io.h>
@@ -29,6 +36,14 @@
static unsigned long virt_base_2700;
+#define write_reg(val, reg) do { writel((val), (reg)); } while(0)
+
+/* Without this delay, the graphics appears somehow scaled and
+ * there is a lot of jitter in scanlines. This delay is probably
+ * needed only after setting some specific register(s) somewhere,
+ * not all over the place... */
+#define write_reg_dly(val, reg) do { writel((val), reg); udelay(1000); } while(0)
+
#define MIN_XRES 16
#define MIN_YRES 16
#define MAX_XRES 2048
@@ -257,19 +272,17 @@ static int mbxfb_set_par(struct fb_info
gsctrl &= ~(FMsk(GSCTRL_GSWIDTH) | FMsk(GSCTRL_GSHEIGHT));
gsctrl |= Gsctrl_Width(info->var.xres) |
Gsctrl_Height(info->var.yres);
- writel(gsctrl, GSCTRL);
- udelay(1000);
+ write_reg_dly(gsctrl, GSCTRL);
gsadr &= ~(FMsk(GSADR_SRCSTRIDE));
gsadr |= Gsadr_Srcstride(info->var.xres * info->var.bits_per_pixel /
(8 * 16) - 1);
- writel(gsadr, GSADR);
- udelay(1000);
+ write_reg_dly(gsadr, GSADR);
/* setup timings */
var->pixclock = mbxfb_get_pixclock(info->var.pixclock, &div);
- writel((Disp_Pll_M(div.m) | Disp_Pll_N(div.n) |
+ write_reg_dly((Disp_Pll_M(div.m) | Disp_Pll_N(div.n) |
Disp_Pll_P(div.p) | DISP_PLL_EN), DISPPLL);
hbps = var->hsync_len;
@@ -282,18 +295,20 @@ static int mbxfb_set_par(struct fb_info
vfps = vas + var->yres;
vt = vfps + var->lower_margin;
- writel((Dht01_Hbps(hbps) | Dht01_Ht(ht)), DHT01);
- writel((Dht02_Hlbs(has) | Dht02_Has(has)), DHT02);
- writel((Dht03_Hfps(hfps) | Dht03_Hrbs(hfps)), DHT03);
- writel((Dhdet_Hdes(has) | Dhdet_Hdef(hfps)), DHDET);
-
- writel((Dvt01_Vbps(vbps) | Dvt01_Vt(vt)), DVT01);
- writel((Dvt02_Vtbs(vas) | Dvt02_Vas(vas)), DVT02);
- writel((Dvt03_Vfps(vfps) | Dvt03_Vbbs(vfps)), DVT03);
- writel((Dvdet_Vdes(vas) | Dvdet_Vdef(vfps)), DVDET);
- writel((Dvectrl_Vevent(vfps) | Dvectrl_Vfetch(vbps)), DVECTRL);
+ write_reg_dly((Dht01_Hbps(hbps) | Dht01_Ht(ht)), DHT01);
+ write_reg_dly((Dht02_Hlbs(has) | Dht02_Has(has)), DHT02);
+ write_reg_dly((Dht03_Hfps(hfps) | Dht03_Hrbs(hfps)), DHT03);
+ write_reg_dly((Dhdet_Hdes(has) | Dhdet_Hdef(hfps)), DHDET);
+
+ write_reg_dly((Dvt01_Vbps(vbps) | Dvt01_Vt(vt)), DVT01);
+ write_reg_dly((Dvt02_Vtbs(vas) | Dvt02_Vas(vas)), DVT02);
+ write_reg_dly((Dvt03_Vfps(vfps) | Dvt03_Vbbs(vfps)), DVT03);
+ write_reg_dly((Dvdet_Vdes(vas) | Dvdet_Vdef(vfps)), DVDET);
+ write_reg_dly((Dvectrl_Vevent(vfps) | Dvectrl_Vfetch(vbps)), DVECTRL);
- writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+
+ write_reg_dly(DINTRE_VEVENT0_EN, DINTRE);
return 0;
}
@@ -305,23 +320,203 @@ static int mbxfb_blank(int blank, struct
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_NORMAL:
- writel((readl(DSCTRL) & ~DSCTRL_SYNCGEN_EN), DSCTRL);
- udelay(1000);
- writel((readl(PIXCLK) & ~PIXCLK_EN), PIXCLK);
- udelay(1000);
- writel((readl(VOVRCLK) & ~VOVRCLK_EN), VOVRCLK);
- udelay(1000);
+ write_reg_dly((readl(DSCTRL) & ~DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly((readl(PIXCLK) & ~PIXCLK_EN), PIXCLK);
+ write_reg_dly((readl(VOVRCLK) & ~VOVRCLK_EN), VOVRCLK);
break;
case FB_BLANK_UNBLANK:
- writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
- udelay(1000);
- writel((readl(PIXCLK) | PIXCLK_EN), PIXCLK);
- udelay(1000);
+ write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly((readl(PIXCLK) | PIXCLK_EN), PIXCLK);
break;
}
return 0;
}
+static int mbxfb_setupOverlay(struct mbxfb_overlaySetup *set)
+{
+ u32 vsctrl, vbbase, vscadr, vsadr;
+ u32 sssize, spoctrl, svctrl, shctrl;
+ u32 vubase, vvbase;
+ u32 vovrclk;
+
+ if (set->scaled_width==0 || set->scaled_height==0)
+ return -EINVAL;
+
+ /* read registers which have reserved bits
+ * so we can write them back as-is. */
+ vovrclk = readl(VOVRCLK);
+ vsctrl = readl(VSCTRL);
+ vscadr = readl(VSCADR);
+ vubase = readl(VUBASE);
+ vvbase = readl(VVBASE);
+
+ spoctrl = readl(SPOCTRL);
+ sssize = readl(SSSIZE);
+
+
+ vbbase = Vbbase_Glalpha(set->alpha);
+
+ vsctrl &= ~( FMsk(VSCTRL_VSWIDTH) |
+ FMsk(VSCTRL_VSHEIGHT) |
+ FMsk(VSCTRL_VPIXFMT) |
+ VSCTRL_GAMMA_EN | VSCTRL_CSC_EN |
+ VSCTRL_COSITED );
+ vsctrl |= Vsctrl_Width(set->width) | Vsctrl_Height(set->height) |
+ VSCTRL_CSC_EN;
+
+ vscadr &= ~(VSCADR_STR_EN | VSCADR_COLKEY_EN | VSCADR_COLKEYSRC |
+ FMsk(VSCADR_BLEND_M) | FMsk(VSCADR_BLEND_POS) |
+ FMsk(VSCADR_VBASE_ADR) );
+ vubase &= ~(VUBASE_UVHALFSTR | FMsk(VUBASE_UBASE_ADR));
+ vvbase &= ~(FMsk(VVBASE_VBASE_ADR));
+
+ switch (set->fmt)
+ {
+ case MBXFB_FMT_YUV12:
+ vsctrl |= VSCTRL_VPIXFMT_YUV12;
+
+ set->Y_stride = ((set->width) + 0xf ) & ~0xf;
+
+ break;
+ case MBXFB_FMT_UY0VY1:
+ vsctrl |= VSCTRL_VPIXFMT_UY0VY1;
+ set->Y_stride = (set->width*2 + 0xf ) & ~0xf;
+ break;
+ case MBXFB_FMT_VY0UY1:
+ vsctrl |= VSCTRL_VPIXFMT_VY0UY1;
+ set->Y_stride = (set->width*2 + 0xf ) & ~0xf;
+ break;
+ case MBXFB_FMT_Y0UY1V:
+ vsctrl |= VSCTRL_VPIXFMT_Y0UY1V;
+ set->Y_stride = (set->width*2 + 0xf ) & ~0xf;
+ break;
+ case MBXFB_FMT_Y0VY1U:
+ vsctrl |= VSCTRL_VPIXFMT_Y0VY1U;
+ set->Y_stride = (set->width*2 + 0xf ) & ~0xf;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* VSCTRL has the bits which sets the Video Pixel Format.
+ * When passing from a packed to planar format,
+ * if we write VSCTRL first, VVBASE and VUBASE would
+ * be zero if we would not set them here. (And then,
+ * the chips hangs and only a reset seems to fix it).
+ *
+ * If course, the values calculated here have no meaning
+ * for packed formats.
+ */
+ set->UV_stride = ((set->width/2) + 0x7 ) & ~0x7;
+ set->U_offset = set->height * set->Y_stride;
+ set->V_offset = set->U_offset +
+ set->height * set->UV_stride;
+ vubase |= Vubase_Ubase_Adr(
+ (0x60000 + set->mem_offset + set->U_offset)>>3);
+ vvbase |= Vvbase_Vbase_Adr(
+ (0x60000 + set->mem_offset + set->V_offset)>>3);
+
+
+ vscadr |= VSCADR_BLEND_VID | VSCADR_BLEND_GLOB |
+ Vscadr_Vbase_Adr((0x60000 + set->mem_offset)>>4);
+
+ if (set->enable)
+ vscadr |= VSCADR_STR_EN;
+
+
+ vsadr = Vsadr_Srcstride((set->Y_stride)/16-1) |
+ Vsadr_Xstart(set->x) | Vsadr_Ystart(set->y);
+
+ sssize &= ~(FMsk(SSSIZE_SC_WIDTH) | FMsk(SSSIZE_SC_HEIGHT));
+ sssize = Sssize_Sc_Width(set->scaled_width-1) |
+ Sssize_Sc_Height(set->scaled_height-1);
+
+ spoctrl &= ~(SPOCTRL_H_SC_BP | SPOCTRL_V_SC_BP |
+ SPOCTRL_HV_SC_OR | SPOCTRL_VS_UR_C |
+ FMsk(SPOCTRL_VORDER) | FMsk(SPOCTRL_VPITCH));
+ spoctrl = Spoctrl_Vpitch((set->height<<11)/set->scaled_height)
+ | SPOCTRL_VORDER_2TAP;
+
+ /* Bypass horiz/vert scaler when same size */
+ if (set->scaled_width == set->width)
+ spoctrl |= SPOCTRL_H_SC_BP;
+ if (set->scaled_height == set->height)
+ spoctrl |= SPOCTRL_V_SC_BP;
+
+ svctrl = Svctrl_Initial1(1<<10) | Svctrl_Initial2(1<<10);
+
+ shctrl = Shctrl_Hinitial(4<<11)
+ | Shctrl_Hpitch((set->width<<11)/set->scaled_width);
+
+ /* Video plane registers */
+ write_reg(vsctrl, VSCTRL);
+ write_reg(vbbase, VBBASE);
+ write_reg(vscadr, VSCADR);
+ write_reg(vubase, VUBASE);
+ write_reg(vvbase, VVBASE);
+ write_reg(vsadr, VSADR);
+
+ /* Video scaler registers */
+ write_reg(sssize, SSSIZE);
+ write_reg(spoctrl, SPOCTRL);
+ write_reg(svctrl, SVCTRL);
+ write_reg(shctrl, SHCTRL);
+
+ /* RAPH: Using those coefficients, the scaled
+ * image is quite blurry. I dont know how
+ * to improve them ; The chip documentation
+ * was not helpful.. */
+ write_reg(0x21212121, VSCOEFF0);
+ write_reg(0x21212121, VSCOEFF1);
+ write_reg(0x21212121, VSCOEFF2);
+ write_reg(0x21212121, VSCOEFF3);
+ write_reg(0x21212121, VSCOEFF4);
+ write_reg(0x00000000, HSCOEFF0);
+ write_reg(0x00000000, HSCOEFF1);
+ write_reg(0x00000000, HSCOEFF2);
+ write_reg(0x03020201, HSCOEFF3);
+ write_reg(0x09070604, HSCOEFF4);
+ write_reg(0x0f0e0c0a, HSCOEFF5);
+ write_reg(0x15141211, HSCOEFF6);
+ write_reg(0x19181716, HSCOEFF7);
+ write_reg(0x00000019, HSCOEFF8);
+
+ /* Clock */
+ if (set->enable)
+ vovrclk |= 1;
+ else
+ vovrclk &= ~1;
+
+ write_reg(vovrclk, VOVRCLK);
+
+ return 0;
+}
+
+static int mbxfb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct mbxfb_overlaySetup setup;
+ int res;
+
+ if (cmd == MBXFB_IOCX_OVERLAY)
+ {
+ if (copy_from_user(&setup, (void __user*)arg,
+ sizeof(struct mbxfb_overlaySetup)))
+ return -EFAULT;
+
+ res = mbxfb_setupOverlay(&setup);
+ if (res)
+ return res;
+
+ if (copy_to_user((void __user*)arg, &setup,
+ sizeof(struct mbxfb_overlaySetup)))
+ return -EFAULT;
+
+ return 0;
+ }
+ return -EINVAL;
+}
+
static struct fb_ops mbxfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = mbxfb_check_var,
@@ -331,6 +526,7 @@ static struct fb_ops mbxfb_ops = {
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_blank = mbxfb_blank,
+ .fb_ioctl = mbxfb_ioctl,
};
/*
@@ -339,36 +535,29 @@ static struct fb_ops mbxfb_ops = {
*/
static void __devinit setup_memc(struct fb_info *fbi)
{
- struct mbxfb_info *mfbi = fbi->par;
unsigned long tmp;
int i;
/* FIXME: use platfrom specific parameters */
/* setup SDRAM controller */
- writel((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
+ write_reg_dly((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
LMCFG_LMA_TS),
LMCFG);
- udelay(1000);
- writel(LMPWR_MC_PWR_ACT, LMPWR);
- udelay(1000);
+ write_reg_dly(LMPWR_MC_PWR_ACT, LMPWR);
/* setup SDRAM timings */
- writel((Lmtim_Tras(7) | Lmtim_Trp(3) | Lmtim_Trcd(3) |
+ write_reg_dly((Lmtim_Tras(7) | Lmtim_Trp(3) | Lmtim_Trcd(3) |
Lmtim_Trc(9) | Lmtim_Tdpl(2)),
LMTIM);
- udelay(1000);
/* setup SDRAM refresh rate */
- writel(0xc2b, LMREFRESH);
- udelay(1000);
+ write_reg_dly(0xc2b, LMREFRESH);
/* setup SDRAM type parameters */
- writel((LMTYPE_CASLAT_3 | LMTYPE_BKSZ_2 | LMTYPE_ROWSZ_11 |
+ write_reg_dly((LMTYPE_CASLAT_3 | LMTYPE_BKSZ_2 | LMTYPE_ROWSZ_11 |
LMTYPE_COLSZ_8),
LMTYPE);
- udelay(1000);
/* enable memory controller */
- writel(LMPWR_MC_PWR_ACT, LMPWR);
- udelay(1000);
+ write_reg_dly(LMPWR_MC_PWR_ACT, LMPWR);
/* perform dummy reads */
for ( i = 0; i < 16; i++ ) {
@@ -379,34 +568,30 @@ static void __devinit setup_memc(struct
static void enable_clocks(struct fb_info *fbi)
{
/* enable clocks */
- writel(SYSCLKSRC_PLL_2, SYSCLKSRC);
- udelay(1000);
- writel(PIXCLKSRC_PLL_1, PIXCLKSRC);
- udelay(1000);
- writel(0x00000000, CLKSLEEP);
- udelay(1000);
- writel((Core_Pll_M(0x17) | Core_Pll_N(0x3) | Core_Pll_P(0x0) |
+ write_reg_dly(SYSCLKSRC_PLL_2, SYSCLKSRC);
+ write_reg_dly(PIXCLKSRC_PLL_1, PIXCLKSRC);
+ write_reg_dly(0x00000000, CLKSLEEP);
+
+ /* PLL output = (Frefclk * M) / (N * 2^P )
+ *
+ * M: 0x17, N: 0x3, P: 0x0 == 100 Mhz!
+ * M: 0xb, N: 0x1, P: 0x1 == 71 Mhz
+ * */
+ write_reg_dly((Core_Pll_M(0xb) | Core_Pll_N(0x1) | Core_Pll_P(0x1) |
CORE_PLL_EN),
COREPLL);
- udelay(1000);
- writel((Disp_Pll_M(0x1b) | Disp_Pll_N(0x7) | Disp_Pll_P(0x1) |
+
+ write_reg_dly((Disp_Pll_M(0x1b) | Disp_Pll_N(0x7) | Disp_Pll_P(0x1) |
DISP_PLL_EN),
DISPPLL);
- writel(0x00000000, VOVRCLK);
- udelay(1000);
- writel(PIXCLK_EN, PIXCLK);
- udelay(1000);
- writel(MEMCLK_EN, MEMCLK);
- udelay(1000);
- writel(0x00000006, M24CLK);
- udelay(1000);
- writel(0x00000006, MBXCLK);
- udelay(1000);
- writel(SDCLK_EN, SDCLK);
- udelay(1000);
- writel(0x00000001, PIXCLKDIV);
- udelay(1000);
+ write_reg_dly(0x00000000, VOVRCLK);
+ write_reg_dly(PIXCLK_EN, PIXCLK);
+ write_reg_dly(MEMCLK_EN, MEMCLK);
+ write_reg_dly(0x00000006, M24CLK);
+ write_reg_dly(0x00000006, MBXCLK);
+ write_reg_dly(SDCLK_EN, SDCLK);
+ write_reg_dly(0x00000001, PIXCLKDIV);
}
static void __devinit setup_graphics(struct fb_info *fbi)
@@ -430,16 +615,11 @@ static void __devinit setup_graphics(str
break;
}
- writel(gsctrl, GSCTRL);
- udelay(1000);
- writel(0x00000000, GBBASE);
- udelay(1000);
- writel(0x00ffffff, GDRCTRL);
- udelay(1000);
- writel((GSCADR_STR_EN | Gscadr_Gbase_Adr(0x6000)), GSCADR);
- udelay(1000);
- writel(0x00000000, GPLUT);
- udelay(1000);
+ write_reg_dly(gsctrl, GSCTRL);
+ write_reg_dly(0x00000000, GBBASE);
+ write_reg_dly(0x00ffffff, GDRCTRL);
+ write_reg_dly((GSCADR_STR_EN | Gscadr_Gbase_Adr(0x6000)), GSCADR);
+ write_reg_dly(0x00000000, GPLUT);
}
static void __devinit setup_display(struct fb_info *fbi)
@@ -451,17 +631,14 @@ static void __devinit setup_display(stru
dsctrl |= DSCTRL_HS_POL;
if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
dsctrl |= DSCTRL_VS_POL;
- writel(dsctrl, DSCTRL);
- udelay(1000);
- writel(0xd0303010, DMCTRL);
- udelay(1000);
- writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly(dsctrl, DSCTRL);
+ write_reg_dly(0xd0303010, DMCTRL);
+ write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
}
static void __devinit enable_controller(struct fb_info *fbi)
{
- writel(SYSRST_RST, SYSRST);
- udelay(1000);
+ write_reg_dly(SYSRST_RST, SYSRST);
enable_clocks(fbi);
@@ -478,12 +655,12 @@ static void __devinit enable_controller(
static int mbxfb_suspend(struct platform_device *dev, pm_message_t state)
{
/* make frame buffer memory enter self-refresh mode */
- writel(LMPWR_MC_PWR_SRM, LMPWR);
+ write_reg_dly(LMPWR_MC_PWR_SRM, LMPWR);
while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM)
; /* empty statement */
/* reset the device, since it's initial state is 'mostly sleeping' */
- writel(SYSRST_RST, SYSRST);
+ write_reg_dly(SYSRST_RST, SYSRST);
return 0;
}
@@ -495,7 +672,7 @@ static int mbxfb_resume(struct platform_
/* setup_graphics(fbi); */
/* setup_display(fbi); */
- writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
return 0;
}
#else
@@ -520,6 +697,12 @@ static int __devinit mbxfb_probe(struct
dev_dbg(dev, "mbxfb_probe\n");
+ pdata = dev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&dev->dev, "platform data is required\n");
+ return -EINVAL;
+ }
+
fbi = framebuffer_alloc(sizeof(struct mbxfb_info), &dev->dev);
if (fbi == NULL) {
dev_err(&dev->dev, "framebuffer_alloc failed\n");
@@ -528,7 +711,8 @@ static int __devinit mbxfb_probe(struct
mfbi = fbi->par;
fbi->pseudo_palette = mfbi->pseudo_palette;
- pdata = dev->dev.platform_data;
+
+
if (pdata->probe)
mfbi->platform_probe = pdata->probe;
if (pdata->remove)
@@ -578,16 +762,16 @@ static int __devinit mbxfb_probe(struct
goto err4;
}
- /* FIXME: get from platform */
fbi->screen_base = (char __iomem *)(mfbi->fb_virt_addr + 0x60000);
- fbi->screen_size = 8 * 1024 * 1024; /* 8 Megs */
+ fbi->screen_size = pdata->memsize;
fbi->fbops = &mbxfb_ops;
fbi->var = mbxfb_default;
fbi->fix = mbxfb_fix;
fbi->fix.smem_start = mfbi->fb_phys_addr + 0x60000;
- fbi->fix.smem_len = 8 * 1024 * 1024;
- fbi->fix.line_length = 640 * 2;
+ fbi->fix.smem_len = pdata->memsize;
+ fbi->fix.line_length = mbxfb_default.xres_virtual *
+ mbxfb_default.bits_per_pixel / 8;
ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
if (ret < 0) {
@@ -636,8 +820,7 @@ static int __devexit mbxfb_remove(struct
{
struct fb_info *fbi = platform_get_drvdata(dev);
- writel(SYSRST_RST, SYSRST);
- udelay(1000);
+ write_reg_dly(SYSRST_RST, SYSRST);
mbxfb_debugfs_remove(fbi);
diff -puN include/video/mbxfb.h~mbxfb-add-yuv-video-overlay-support include/video/mbxfb.h
--- a/include/video/mbxfb.h~mbxfb-add-yuv-video-overlay-support
+++ a/include/video/mbxfb.h
@@ -1,6 +1,9 @@
#ifndef __MBX_FB_H
#define __MBX_FB_H
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
struct mbxfb_val {
unsigned int defval;
unsigned int min;
@@ -25,4 +28,32 @@ struct mbxfb_platform_data {
int (*remove)(struct fb_info *fb);
};
+/* planar */
+#define MBXFB_FMT_YUV12 0
+
+/* packed */
+#define MBXFB_FMT_UY0VY1 1
+#define MBXFB_FMT_VY0UY1 2
+#define MBXFB_FMT_Y0UY1V 3
+#define MBXFB_FMT_Y0VY1U 4
+struct mbxfb_overlaySetup {
+ __u32 enable;
+ __u32 x, y;
+ __u32 width, height;
+ __u32 alpha;
+ __u32 fmt;
+ __u32 mem_offset;
+ __u32 scaled_width;
+ __u32 scaled_height;
+
+ /* Filled by the driver */
+ __u32 U_offset;
+ __u32 V_offset;
+
+ __u16 Y_stride;
+ __u16 UV_stride;
+};
+
+#define MBXFB_IOCX_OVERLAY _IOWR(0xF4, 0x00,struct mbxfb_overlaySetup)
+
#endif /* __MBX_FB_H */
_
Patches currently in -mm which might be from raph@xxxxxx are
mbxfb-add-yuv-video-overlay-support.patch
mbxfb-document-the-new-ioctl.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
