The patch titled
Subject: lib/zlib: implement switching between DFLTCC and software
has been added to the -mm mm-nonmm-unstable branch. Its filename is
lib-zlib-implement-switching-between-dfltcc-and-software.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/lib-zlib-implement-switching-between-dfltcc-and-software.patch
This patch will later appear in the mm-nonmm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Mikhail Zaslonko <zaslonko@xxxxxxxxxxxxx>
Subject: lib/zlib: implement switching between DFLTCC and software
Date: Thu, 26 Jan 2023 14:14:22 +0100
This commit is based on:
https://github.com/zlib-ng/zlib-ng/commit/fc04275
Link: https://lkml.kernel.org/r/20230126131428.1222214-3-zaslonko@xxxxxxxxxxxxx
Signed-off-by: Mikhail Zaslonko <zaslonko@xxxxxxxxxxxxx>
Acked-by: Ilya Leoshkevich <iii@xxxxxxxxxxxxx>
Cc: Heiko Carstens <hca@xxxxxxxxxxxxx>
Cc: Vasily Gorbik <gor@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
lib/zlib_dfltcc/dfltcc_deflate.c | 38 ++++++++++++++++-------------
1 file changed, 22 insertions(+), 16 deletions(-)
--- a/lib/zlib_dfltcc/dfltcc_deflate.c~lib-zlib-implement-switching-between-dfltcc-and-software
+++ a/lib/zlib_dfltcc/dfltcc_deflate.c
@@ -112,30 +112,36 @@ int dfltcc_deflate(
int soft_bcc;
int no_flush;
- if (!dfltcc_can_deflate(strm))
+ if (!dfltcc_can_deflate(strm)) {
+ /* Clear history. */
+ if (flush == Z_FULL_FLUSH)
+ param->hl = 0;
return 0;
+ }
again:
masked_avail_in = 0;
soft_bcc = 0;
no_flush = flush == Z_NO_FLUSH;
- /* Trailing empty block. Switch to software, except when Continuation Flag
- * is set, which means that DFLTCC has buffered some output in the
- * parameter block and needs to be called again in order to flush it.
+ /* No input data. Return, except when Continuation Flag is set, which means
+ * that DFLTCC has buffered some output in the parameter block and needs to
+ * be called again in order to flush it.
*/
- if (flush == Z_FINISH && strm->avail_in == 0 && !param->cf) {
- if (param->bcf) {
- /* A block is still open, and the hardware does not support closing
- * blocks without adding data. Thus, close it manually.
- */
+ if (strm->avail_in == 0 && !param->cf) {
+ /* A block is still open, and the hardware does not support closing
+ * blocks without adding data. Thus, close it manually.
+ */
+ if (!no_flush && param->bcf) {
send_eobs(strm, param);
param->bcf = 0;
}
- return 0;
- }
-
- if (strm->avail_in == 0 && !param->cf) {
+ /* Let one of deflate_* functions write a trailing empty block. */
+ if (flush == Z_FINISH)
+ return 0;
+ /* Clear history. */
+ if (flush == Z_FULL_FLUSH)
+ param->hl = 0;
*result = need_more;
return 1;
}
@@ -189,7 +195,7 @@ again:
param->cvt = CVT_ADLER32;
if (!no_flush)
/* We need to close a block. Always do this in software - when there is
- * no input data, the hardware will not nohor BCC. */
+ * no input data, the hardware will not hohor BCC. */
soft_bcc = 1;
if (flush == Z_FINISH && !param->bcf)
/* We are about to open a BFINAL block, set Block Header Final bit
@@ -204,8 +210,8 @@ again:
param->sbb = (unsigned int)state->bi_valid;
if (param->sbb > 0)
*strm->next_out = (Byte)state->bi_buf;
- if (param->hl)
- param->nt = 0; /* Honor history */
+ /* Honor history and check value */
+ param->nt = 0;
param->cv = strm->adler;
/* When opening a block, choose a Huffman-Table Type */
_
Patches currently in -mm which might be from zaslonko@xxxxxxxxxxxxx are
lib-zlib-adjust-offset-calculation-for-dfltcc_state.patch
lib-zlib-implement-switching-between-dfltcc-and-software.patch
lib-zlib-fix-dfltcc-not-flushing-eobs-when-creating-raw-streams.patch
lib-zlib-fix-dfltcc-ignoring-flush-modes-when-avail_in-==-0.patch
lib-zlib-dfltcc-not-writing-header-bits-when-avail_out-==-0.patch
lib-zlib-split-deflate-and-inflate-states-for-dfltcc.patch
lib-zlib-dfltcc-support-inflate-with-small-window.patch
lib-zlib-dfltcc-always-switch-to-software-inflate-for-z_packet_flush-option.patch
