[to-be-updated] mm-zswap-delay-the-initializaton-of-zswap-until-the-first-enablement.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The quilt patch titled
     Subject: mm/zswap: delay the initializaton of zswap until the first enablement
has been removed from the -mm tree.  Its filename was
     mm-zswap-delay-the-initializaton-of-zswap-until-the-first-enablement.patch

This patch was dropped because an updated version will be merged

------------------------------------------------------
From: Liu Shixin <liushixin2@xxxxxxxxxx>
Subject: mm/zswap: delay the initializaton of zswap until the first enablement
Date: Sat, 27 Aug 2022 18:45:59 +0800

In the initialization of zswap, about 18MB memory will be allocated for
zswap_pool in my machine.  Since not all users use zswap, the memory may
be wasted.  Save the memory for these users by delaying the initialization
of zswap to first enablement.

Link: https://lkml.kernel.org/r/20220827104600.1813214-5-liushixin2@xxxxxxxxxx
Signed-off-by: Liu Shixin <liushixin2@xxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Dan Streetman <ddstreet@xxxxxxxx>
Cc: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
Cc: Nathan Chancellor <nathan@xxxxxxxxxx>
Cc: Seth Jennings <sjenning@xxxxxxxxxx>
Cc: Vitaly Wool <vitaly.wool@xxxxxxxxxxxx>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 mm/zswap.c |   50 ++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 40 insertions(+), 10 deletions(-)

--- a/mm/zswap.c~mm-zswap-delay-the-initializaton-of-zswap-until-the-first-enablement
+++ a/mm/zswap.c
@@ -81,6 +81,8 @@ static bool zswap_pool_reached_full;
 
 #define ZSWAP_PARAM_UNSET ""
 
+static int zswap_setup(void);
+
 /* Enable/disable zswap */
 static bool zswap_enabled = IS_ENABLED(CONFIG_ZSWAP_DEFAULT_ON);
 static int zswap_enabled_param_set(const char *,
@@ -220,6 +222,8 @@ static atomic_t zswap_pools_count = ATOM
 
 /* init state */
 static int zswap_init_state;
+/* used to ensure the integrity of initialization */
+static DEFINE_MUTEX(zswap_init_lock);
 
 /* init completed, but couldn't create the initial pool */
 static bool zswap_has_pool;
@@ -273,13 +277,13 @@ static void zswap_update_total_size(void
 **********************************/
 static struct kmem_cache *zswap_entry_cache;
 
-static int __init zswap_entry_cache_create(void)
+static int zswap_entry_cache_create(void)
 {
 	zswap_entry_cache = KMEM_CACHE(zswap_entry, 0);
 	return zswap_entry_cache == NULL;
 }
 
-static void __init zswap_entry_cache_destroy(void)
+static void zswap_entry_cache_destroy(void)
 {
 	kmem_cache_destroy(zswap_entry_cache);
 }
@@ -664,7 +668,7 @@ error:
 	return NULL;
 }
 
-static __init struct zswap_pool *__zswap_pool_create_fallback(void)
+static struct zswap_pool *__zswap_pool_create_fallback(void)
 {
 	bool has_comp, has_zpool;
 
@@ -782,11 +786,17 @@ static int __zswap_param_set(const char
 	if (!strcmp(s, *(char **)kp->arg) && zswap_has_pool)
 		return 0;
 
-	/* if this is load-time (pre-init) param setting,
+	/*
+	 * if zswap has not been initialized,
 	 * don't create a pool; that's done during init.
 	 */
-	if (zswap_init_state == ZSWAP_UNINIT)
-		return param_set_charp(s, kp);
+	mutex_lock(&zswap_init_lock);
+	if (zswap_init_state == ZSWAP_UNINIT) {
+		ret = param_set_charp(s, kp);
+		mutex_unlock(&zswap_init_lock);
+		return ret;
+	}
+	mutex_unlock(&zswap_init_lock);
 
 	if (!type) {
 		if (!zpool_has_pool(s)) {
@@ -876,6 +886,14 @@ static int zswap_zpool_param_set(const c
 static int zswap_enabled_param_set(const char *val,
 				   const struct kernel_param *kp)
 {
+	if (system_state == SYSTEM_RUNNING) {
+		mutex_lock(&zswap_init_lock);
+		if (zswap_setup()) {
+			mutex_unlock(&zswap_init_lock);
+			return -ENODEV;
+		}
+		mutex_unlock(&zswap_init_lock);
+	}
 	if (zswap_init_state == ZSWAP_INIT_FAILED) {
 		pr_err("can't enable, initialization failed\n");
 		return -ENODEV;
@@ -1432,7 +1450,7 @@ static const struct frontswap_ops zswap_
 
 static struct dentry *zswap_debugfs_root;
 
-static int __init zswap_debugfs_init(void)
+static int zswap_debugfs_init(void)
 {
 	if (!debugfs_initialized())
 		return -ENODEV;
@@ -1463,7 +1481,7 @@ static int __init zswap_debugfs_init(voi
 	return 0;
 }
 #else
-static int __init zswap_debugfs_init(void)
+static int zswap_debugfs_init(void)
 {
 	return 0;
 }
@@ -1472,11 +1490,14 @@ static int __init zswap_debugfs_init(voi
 /*********************************
 * module init and exit
 **********************************/
-static int __init init_zswap(void)
+static int zswap_setup(void)
 {
 	struct zswap_pool *pool;
 	int ret;
 
+	if (zswap_init_state != ZSWAP_UNINIT)
+		return 0;
+
 	if (zswap_entry_cache_create()) {
 		pr_err("entry cache creation failed\n");
 		goto cache_fail;
@@ -1534,8 +1555,17 @@ cache_fail:
 	zswap_enabled = false;
 	return -ENOMEM;
 }
+
+static int __init zswap_init(void)
+{
+	/* skip init if zswap is disabled when system startup */
+	if (!zswap_enabled)
+		return 0;
+	return zswap_setup();
+}
+
 /* must be late so crypto has time to come up */
-late_initcall(init_zswap);
+late_initcall(zswap_init);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Seth Jennings <sjennings@xxxxxxxxxxxxxx>");
_

Patches currently in -mm which might be from liushixin2@xxxxxxxxxx are

mm-zswap-skip-confusing-print-info.patch




[Index of Archives]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux