The patch titled
genapic: default to physical mode on hotplug CPU kernels
has been added to the -mm tree. Its filename is
genapic-default-to-physical-mode-on-hotplug-cpu-kernels.patch
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: genapic: default to physical mode on hotplug CPU kernels
From: Ingo Molnar <mingo@xxxxxxx>
Default to physical mode on hotplug CPU kernels. Furher simplify and clean up
the APIC initialization code.
Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
Cc: Suresh Siddha <suresh.b.siddha@xxxxxxxxx>
Cc: Andi Kleen <ak@xxxxxxx>
Cc: "Li, Shaohua" <shaohua.li@xxxxxxxxx>
Cc: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
arch/i386/kernel/acpi/boot.c | 2 +-
arch/i386/kernel/mpparse.c | 2 +-
arch/x86_64/kernel/genapic.c | 20 +++-----------------
arch/x86_64/kernel/mpparse.c | 2 +-
include/asm-i386/genapic.h | 4 ++--
include/asm-i386/mach-bigsmp/mach_apic.h | 2 +-
include/asm-i386/mach-default/mach_apic.h | 2 +-
include/asm-i386/mach-es7000/mach_apic.h | 2 +-
include/asm-i386/mach-generic/mach_apic.h | 2 +-
include/asm-i386/mach-numaq/mach_apic.h | 2 +-
include/asm-i386/mach-summit/mach_apic.h | 2 +-
include/asm-i386/mach-visws/mach_apic.h | 2 +-
include/asm-x86_64/apic.h | 2 +-
13 files changed, 16 insertions(+), 30 deletions(-)
diff -puN arch/i386/kernel/acpi/boot.c~genapic-default-to-physical-mode-on-hotplug-cpu-kernels arch/i386/kernel/acpi/boot.c
--- a/arch/i386/kernel/acpi/boot.c~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/arch/i386/kernel/acpi/boot.c
@@ -931,7 +931,7 @@ static void __init acpi_process_madt(voi
acpi_ioapic = 1;
smp_found_config = 1;
- clustered_apic_check();
+ setup_apic_routing();
}
}
if (error == -EINVAL) {
diff -puN arch/i386/kernel/mpparse.c~genapic-default-to-physical-mode-on-hotplug-cpu-kernels arch/i386/kernel/mpparse.c
--- a/arch/i386/kernel/mpparse.c~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/arch/i386/kernel/mpparse.c
@@ -477,7 +477,7 @@ static int __init smp_read_mpc(struct mp
}
++mpc_record;
}
- clustered_apic_check();
+ setup_apic_routing();
if (!num_processors)
printk(KERN_ERR "SMP mptable: no processors registered!\n");
return num_processors;
diff -puN arch/x86_64/kernel/genapic.c~genapic-default-to-physical-mode-on-hotplug-cpu-kernels arch/x86_64/kernel/genapic.c
--- a/arch/x86_64/kernel/genapic.c~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/arch/x86_64/kernel/genapic.c
@@ -33,25 +33,11 @@ u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0
struct genapic __read_mostly *genapic = &apic_flat;
/*
- * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
+ * Choose the APIC routing mode:
*/
-void __init clustered_apic_check(void)
+void __init setup_apic_routing(void)
{
- unsigned int i, max_apic = 0;
- u8 id;
-
- /*
- * Determine the maximum APIC ID in use:
- */
- for (i = 0; i < NR_CPUS; i++) {
- id = bios_cpu_apicid[i];
- if (id == BAD_APICID)
- continue;
- if (id > max_apic)
- max_apic = id;
- }
-
- if (max_apic < 8)
+ if (cpus_weight(cpu_possible_map) <= 8)
genapic = &apic_flat;
else
genapic = &apic_physflat;
diff -puN arch/x86_64/kernel/mpparse.c~genapic-default-to-physical-mode-on-hotplug-cpu-kernels arch/x86_64/kernel/mpparse.c
--- a/arch/x86_64/kernel/mpparse.c~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/arch/x86_64/kernel/mpparse.c
@@ -300,7 +300,7 @@ static int __init smp_read_mpc(struct mp
}
}
}
- clustered_apic_check();
+ setup_apic_routing();
if (!num_processors)
printk(KERN_ERR "MPTABLE: no processors registered!\n");
return num_processors;
diff -puN include/asm-i386/genapic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels include/asm-i386/genapic.h
--- a/include/asm-i386/genapic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/include/asm-i386/genapic.h
@@ -36,7 +36,7 @@ struct genapic {
void (*init_apic_ldr)(void);
physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
- void (*clustered_apic_check)(void);
+ void (*setup_apic_routing)(void);
int (*multi_timer_check)(int apic, int irq);
int (*apicid_to_node)(int logical_apicid);
int (*cpu_to_logical_apicid)(int cpu);
@@ -99,7 +99,7 @@ struct genapic {
APICFUNC(check_apicid_present) \
APICFUNC(init_apic_ldr) \
APICFUNC(ioapic_phys_id_map) \
- APICFUNC(clustered_apic_check) \
+ APICFUNC(setup_apic_routing) \
APICFUNC(multi_timer_check) \
APICFUNC(apicid_to_node) \
APICFUNC(cpu_to_logical_apicid) \
diff -puN include/asm-i386/mach-bigsmp/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels include/asm-i386/mach-bigsmp/mach_apic.h
--- a/include/asm-i386/mach-bigsmp/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/include/asm-i386/mach-bigsmp/mach_apic.h
@@ -71,7 +71,7 @@ static inline void init_apic_ldr(void)
apic_write_around(APIC_LDR, val);
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"Physflat", nr_ioapics);
diff -puN include/asm-i386/mach-default/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels include/asm-i386/mach-default/mach_apic.h
--- a/include/asm-i386/mach-default/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/include/asm-i386/mach-default/mach_apic.h
@@ -54,7 +54,7 @@ static inline physid_mask_t ioapic_phys_
return phys_map;
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"Flat", nr_ioapics);
diff -puN include/asm-i386/mach-es7000/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels include/asm-i386/mach-es7000/mach_apic.h
--- a/include/asm-i386/mach-es7000/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/include/asm-i386/mach-es7000/mach_apic.h
@@ -81,7 +81,7 @@ static inline void enable_apic_mode(void
}
extern int apic_version [MAX_APICS];
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
int apic = bios_cpu_apicid[smp_processor_id()];
printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
diff -puN include/asm-i386/mach-generic/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels include/asm-i386/mach-generic/mach_apic.h
--- a/include/asm-i386/mach-generic/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/include/asm-i386/mach-generic/mach_apic.h
@@ -13,7 +13,7 @@
#define apic_id_registered (genapic->apic_id_registered)
#define init_apic_ldr (genapic->init_apic_ldr)
#define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
-#define clustered_apic_check (genapic->clustered_apic_check)
+#define setup_apic_routing (genapic->setup_apic_routing)
#define multi_timer_check (genapic->multi_timer_check)
#define apicid_to_node (genapic->apicid_to_node)
#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid)
diff -puN include/asm-i386/mach-numaq/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels include/asm-i386/mach-numaq/mach_apic.h
--- a/include/asm-i386/mach-numaq/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/include/asm-i386/mach-numaq/mach_apic.h
@@ -34,7 +34,7 @@ static inline void init_apic_ldr(void)
/* Already done in NUMA-Q firmware */
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"NUMA-Q", nr_ioapics);
diff -puN include/asm-i386/mach-summit/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels include/asm-i386/mach-summit/mach_apic.h
--- a/include/asm-i386/mach-summit/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/include/asm-i386/mach-summit/mach_apic.h
@@ -80,7 +80,7 @@ static inline int apic_id_registered(voi
return 1;
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
nr_ioapics);
diff -puN include/asm-i386/mach-visws/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels include/asm-i386/mach-visws/mach_apic.h
--- a/include/asm-i386/mach-visws/mach_apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/include/asm-i386/mach-visws/mach_apic.h
@@ -47,7 +47,7 @@ static inline void summit_check(char *oe
{
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
}
diff -puN include/asm-x86_64/apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels include/asm-x86_64/apic.h
--- a/include/asm-x86_64/apic.h~genapic-default-to-physical-mode-on-hotplug-cpu-kernels
+++ a/include/asm-x86_64/apic.h
@@ -83,7 +83,7 @@ extern void setup_secondary_APIC_clock (
extern int APIC_init_uniprocessor (void);
extern void disable_APIC_timer(void);
extern void enable_APIC_timer(void);
-extern void clustered_apic_check(void);
+extern void setup_apic_routing(void);
extern void setup_APIC_extened_lvt(unsigned char lvt_off, unsigned char vector,
unsigned char msg_type, unsigned char mask);
_
Patches currently in -mm which might be from mingo@xxxxxxx are
add-bottom_half.h.patch
git-scsi-misc.patch
revert-x86_64-mm-add-genapic_force.patch
fix-x86_64-mm-fix-the-irqbalance-quirk-for-e7320-e7520-e7525.patch
cleanup-arch-i386-kernel-smpbootcsmp_tune_scheduling.patch
convert-i386-pda-code-to-use-%fs.patch
x86_64-check-vector-in-setup_ioapic_dest-to-verify-if-need-setup_io_apic_irq.patch
i386-kernel-smpc-dont-use-set_irq_regs.patch
genapic-optimize-fix-apic-mode-setup-2.patch
genapic-always-use-physical-delivery-mode-on-8-cpus.patch
genapic-remove-es7000-workaround.patch
genapic-remove-clustered-apic-mode.patch
genapic-default-to-physical-mode-on-hotplug-cpu-kernels.patch
convert-pm_sem-to-a-mutex.patch
convert-pm_sem-to-a-mutex-fix.patch
lockdep-annotate-nfs-nfsd-in-kernel-sockets.patch
lockdep-annotate-nfs-nfsd-in-kernel-sockets-tidy.patch
sysrq-x-show-blocked-tasks.patch
lockdep-internal-locking-fixes.patch
lockdep-misc-fixes-in-lockdepc.patch
cpuset-remove-sched-domain-hooks-from-cpusets.patch
binfmt_elf-randomize-pie-binaries.patch
disable-clone_child_cleartid-for-abnormal-exit.patch
lockdep-annotate-bcsp-driver.patch
lockdep-print-current-locks-on-in_atomic-warnings.patch
lockdep-name-some-old-style-locks.patch
sleep-profiling.patch
sleep-profiling-fixes.patch
sleep-profiling-fix.patch
debug-workqueue-locking-sanity.patch
debug-workqueue-locking-sanity-fix.patch
retries-in-ext3_prepare_write-violate-ordering-requirements.patch
ktime-fix-signed--unsigned-mismatch-in-ktime_to_ns.patch
kprobes-enable-booster-on-the-preemptible-kernel.patch
declare-smp_call_function_single-in-generic-code.patch
up-smp_call_function_single-should-disable-interrupts.patch
up-smp_call_function_single-should-disable-interrupts-fix.patch
smp_call_function_single-check-that-local-interrupts-are-enabled.patch
hotplug-cpu-clean-up-hotcpu_notifier-use.patch
remove-kernel-lockdepclockdep_internal.patch
lockdep-more-chains.patch
lockdep-show-more-details-about-self-test-failures.patch
softirq-remove-bug_ons-which-can-incorrectly-trigger.patch
futex-remove-unneeded-barrier.patch
remove-the-old-bd_mutex-lockdep-annotation.patch
new-bd_mutex-lockdep-annotation.patch
remove-lock_key-approach-to-managing-nested-bd_mutex-locks.patch
simplify-some-aspects-of-bd_mutex-nesting.patch
use-mutex_lock_nested-for-bd_mutex-to-avoid-lockdep-warning.patch
avoid-lockdep-warning-in-md.patch
fix-generic-warn_on-message.patch
schedc-correct-comment-for-this_rq_lock-routine.patch
sched-fix-migration-cost-estimator.patch
sched-domain-move-sched-group-allocations-to-percpu-area.patch
move_task_off_dead_cpu-should-be-called-with-disabled-ints.patch
sched-domain-increase-the-smt-busy-rebalance-interval.patch
sched-avoid-taking-rq-lock-in-wake_priority_sleeper.patch
sched-remove-staggering-of-load-balancing.patch
sched-disable-interrupts-for-locking-in-load_balance.patch
sched-extract-load-calculation-from-rebalance_tick.patch
sched-move-idle-status-calculation-into-rebalance_tick.patch
sched-use-softirq-for-load-balancing.patch
sched-call-tasklet-less-frequently.patch
sched-add-option-to-serialize-load-balancing.patch
sched-add-option-to-serialize-load-balancing-fix.patch
sched-improve-migration-accuracy.patch
sched-improve-migration-accuracy-tidy.patch
sched-decrease-number-of-load-balances.patch
mm-only-sched-add-a-few-scheduler-event-counters.patch
sched-optimize-activate_task-for-rt-task.patch
kernel-schedc-whitespace-cleanups.patch
kernel-schedc-whitespace-cleanups-more.patch
sched-add-above-background-load-function.patch
mm-implement-swap-prefetching.patch
mm-implement-swap-prefetching-use-ctl_unnumbered.patch
sched-cleanup-remove-task_t-convert-to-struct-task_struct-prefetch.patch
gtod-exponential-update_wall_time.patch
gtod-persistent-clock-support-core.patch
gtod-persistent-clock-support-i386.patch
time-uninline-jiffiesh.patch
time-uninline-jiffiesh-fix.patch
time-fix-msecs_to_jiffies-bug.patch
time-fix-timeout-overflow.patch
cleanup-uninline-irq_enter-and-move-it-into-a-function.patch
dynticks-extend-next_timer_interrupt-to-use-a-reference-jiffie.patch
dynticks-extend-next_timer_interrupt-to-use-a-reference-jiffie-remove-incorrect-warning-in-kernel-timerc.patch
hrtimers-namespace-and-enum-cleanup.patch
hrtimers-clean-up-locking.patch
hrtimers-clean-up-locking-fix.patch
updated-hrtimers-state-tracking.patch
updated-hrtimers-clean-up-callback-tracking.patch
updated-hrtimers-move-and-add-documentation.patch
updated-add-a-framework-to-manage-clock-event-devices.patch
updated-acpi-include-apich.patch
updated-acpi-keep-track-of-timer-broadcast.patch
updated-acpi-add-state-propagation-for-dynamic-broadcasting.patch
updated-i386-cleanup-apic-code.patch
updated-i386-convert-to-clock-event-devices.patch
updated-pm_timer-allow-early-access-and-move-externs-to-a-header-file.patch
updated-i386-rework-local-apic-calibration.patch
updated-high-res-timers-core.patch
updated-high-res-timers-core-high-res-timers-do-itimer-rearming-in-process-context.patch
updated-gtod-mark-tsc-unusable-for-highres-timers.patch
high-res-timers-utilize-tsc-clocksource-again.patch
high-res-timers-utilize-tsc-clocksource-again-fix.patch
updated-dynticks-core-code.patch
updated-dynticks-core-code-fix-resume-bug.patch
updated-dyntick-add-nohz-stats-to-proc-stat.patch
updated-dynticks-i386-arch-code.patch
updated-dynticks-fix-nmi-watchdog.patch
updated-high-res-timers-dynticks-enable-i386-support.patch
updated-debugging-feature-timer-stats.patch
clockevents-core-check-for-clock-event-device-handler-being-non-null-before-calling-it.patch
round_jiffies-infrastructure.patch
round_jiffies-infrastructure-fix.patch
clocksource-add-usage-of-config_sysfs.patch
clocksource-small-cleanup-2.patch
clocksource-small-cleanup-2-fix.patch
clocksource-small-acpi_pm-cleanup.patch
kvm-amd-svm-implementation-more-i386-fixes.patch
detect-atomic-counter-underflows.patch
debug-shared-irqs.patch
make-frame_pointer-default=y.patch
mutex-subsystem-synchro-test-module.patch
vdso-print-fatal-signals.patch
vdso-improve-print_fatal_signals-support-by-adding-memory-maps.patch
vdso-print-fatal-signals-use-ctl_unnumbered.patch
lockdep-show-held-locks-when-showing-a-stackdump.patch
lockdep-show-held-locks-when-showing-a-stackdump-fix.patch
lockdep-show-held-locks-when-showing-a-stackdump-fix-2.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
