The patch titled
Subject: arch: mm: rename FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER
has been added to the -mm mm-unstable branch. Its filename is
arch-mm-rename-force_max_zoneorder-to-arch_force_max_order.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/arch-mm-rename-force_max_zoneorder-to-arch_force_max_order.patch
This patch will later appear in the mm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Zi Yan <ziy@xxxxxxxxxx>
Subject: arch: mm: rename FORCE_MAX_ZONEORDER to ARCH_FORCE_MAX_ORDER
Date: Mon, 15 Aug 2022 10:39:59 -0400
This Kconfig option is used by individual arch to set its desired
MAX_ORDER. Rename it to reflect its actual use.
Link: https://lkml.kernel.org/r/20220815143959.1511278-1-zi.yan@xxxxxxxx
Acked-by: Mike Rapoport <rppt@xxxxxxxxxxxxx>
Signed-off-by: Zi Yan <ziy@xxxxxxxxxx>
Acked-by: Guo Ren <guoren@xxxxxxxxxx> [csky]
Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
Acked-by: Catalin Marinas <catalin.marinas@xxxxxxx> [arm64]
Acked-by: Huacai Chen <chenhuacai@xxxxxxxxxx> [LoongArch]
Acked-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx> [powerpc]
Cc: Vineet Gupta <vgupta@xxxxxxxxxxxx>
Cc: Taichi Sugaya <sugaya.taichi@xxxxxxxxxxxxx>
Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Cc: Qin Jian <qinjian@xxxxxxxxxxx>
Cc: Guo Ren <guoren@xxxxxxxxxx>
Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Dinh Nguyen <dinguyen@xxxxxxxxxx>
Cc: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
Cc: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Chris Zankel <chris@xxxxxxxxxx>
Cc: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
arch/arc/Kconfig | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/configs/imx_v6_v7_defconfig | 2 +-
arch/arm/configs/milbeaut_m10v_defconfig | 2 +-
arch/arm/configs/oxnas_v6_defconfig | 2 +-
arch/arm/configs/pxa_defconfig | 2 +-
arch/arm/configs/sama7_defconfig | 2 +-
arch/arm/configs/sp7021_defconfig | 2 +-
arch/arm64/Kconfig | 2 +-
arch/csky/Kconfig | 2 +-
arch/ia64/Kconfig | 2 +-
arch/ia64/include/asm/sparsemem.h | 6 +++---
arch/loongarch/Kconfig | 2 +-
arch/m68k/Kconfig.cpu | 2 +-
arch/mips/Kconfig | 2 +-
arch/nios2/Kconfig | 2 +-
arch/powerpc/Kconfig | 2 +-
arch/powerpc/configs/85xx/ge_imp3a_defconfig | 2 +-
arch/powerpc/configs/fsl-emb-nonhw.config | 2 +-
arch/sh/configs/ecovec24_defconfig | 2 +-
arch/sh/mm/Kconfig | 2 +-
arch/sparc/Kconfig | 2 +-
arch/xtensa/Kconfig | 2 +-
include/linux/mmzone.h | 4 ++--
24 files changed, 27 insertions(+), 27 deletions(-)
--- a/arch/arc/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/arc/Kconfig
@@ -554,7 +554,7 @@ config ARC_BUILTIN_DTB_NAME
endmenu # "ARC Architecture Configuration"
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
default "12" if ARC_HUGEPAGE_16M
default "11"
--- a/arch/arm64/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/arm64/Kconfig
@@ -1401,7 +1401,7 @@ config XEN
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int
default "14" if ARM64_64K_PAGES
default "12" if ARM64_16K_PAGES
--- a/arch/arm/configs/imx_v6_v7_defconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/arm/configs/imx_v6_v7_defconfig
@@ -31,7 +31,7 @@ CONFIG_SOC_VF610=y
CONFIG_SMP=y
CONFIG_ARM_PSCI=y
CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_ARCH_FORCE_MAX_ORDER=14
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
--- a/arch/arm/configs/milbeaut_m10v_defconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/arm/configs/milbeaut_m10v_defconfig
@@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y
# CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
# CONFIG_ARM_PATCH_IDIV is not set
CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
CONFIG_SECCOMP=y
CONFIG_KEXEC=y
CONFIG_EFI=y
--- a/arch/arm/configs/oxnas_v6_defconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/arm/configs/oxnas_v6_defconfig
@@ -12,7 +12,7 @@ CONFIG_ARCH_OXNAS=y
CONFIG_MACH_OX820=y
CONFIG_SMP=y
CONFIG_NR_CPUS=16
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
CONFIG_SECCOMP=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
--- a/arch/arm/configs/pxa_defconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/arm/configs/pxa_defconfig
@@ -21,7 +21,7 @@ CONFIG_MACH_AKITA=y
CONFIG_MACH_BORZOI=y
CONFIG_PXA_SYSTEMS_CPLDS=y
CONFIG_AEABI=y
-CONFIG_FORCE_MAX_ZONEORDER=9
+CONFIG_ARCH_FORCE_MAX_ORDER=9
CONFIG_CMDLINE="root=/dev/ram0 ro"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
--- a/arch/arm/configs/sama7_defconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/arm/configs/sama7_defconfig
@@ -19,7 +19,7 @@ CONFIG_ATMEL_CLOCKSOURCE_TCB=y
# CONFIG_CACHE_L2X0 is not set
# CONFIG_ARM_PATCH_IDIV is not set
# CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_FORCE_MAX_ZONEORDER=15
+CONFIG_ARCH_FORCE_MAX_ORDER=15
CONFIG_UACCESS_WITH_MEMCPY=y
# CONFIG_ATAGS is not set
CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
--- a/arch/arm/configs/sp7021_defconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/arm/configs/sp7021_defconfig
@@ -18,7 +18,7 @@ CONFIG_ARCH_SUNPLUS=y
# CONFIG_VDSO is not set
CONFIG_SMP=y
CONFIG_THUMB2_KERNEL=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_MODULES=y
--- a/arch/arm/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/arm/Kconfig
@@ -1434,7 +1434,7 @@ config ARM_MODULE_PLTS
Disabling this is usually safe for small single-platform
configurations. If unsure, say y.
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
default "12" if SOC_AM33XX
default "9" if SA1111
--- a/arch/csky/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/csky/Kconfig
@@ -332,7 +332,7 @@ config HIGHMEM
select KMAP_LOCAL
default y
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
default "11"
--- a/arch/ia64/include/asm/sparsemem.h~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/ia64/include/asm/sparsemem.h
@@ -11,10 +11,10 @@
#define SECTION_SIZE_BITS (30)
#define MAX_PHYSMEM_BITS (50)
-#ifdef CONFIG_FORCE_MAX_ZONEORDER
-#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
+#ifdef CONFIG_ARCH_FORCE_MAX_ORDER
+#if ((CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
#undef SECTION_SIZE_BITS
-#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
+#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT)
#endif
#endif
--- a/arch/ia64/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/ia64/Kconfig
@@ -200,7 +200,7 @@ config IA64_CYCLONE
Say Y here to enable support for IBM EXA Cyclone time source.
If you're unsure, answer N.
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
range 11 17 if !HUGETLB_PAGE
default "17" if HUGETLB_PAGE
--- a/arch/loongarch/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/loongarch/Kconfig
@@ -369,7 +369,7 @@ config NODES_SHIFT
default "6"
depends on NUMA
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
range 14 64 if PAGE_SIZE_64KB
default "14" if PAGE_SIZE_64KB
--- a/arch/m68k/Kconfig.cpu~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/m68k/Kconfig.cpu
@@ -399,7 +399,7 @@ config SINGLE_MEMORY_CHUNK
order" to save memory that could be wasted for unused memory map.
Say N if not sure.
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order" if ADVANCED
depends on !SINGLE_MEMORY_CHUNK
default "11"
--- a/arch/mips/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/mips/Kconfig
@@ -2140,7 +2140,7 @@ config PAGE_SIZE_64KB
endchoice
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
--- a/arch/nios2/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/nios2/Kconfig
@@ -44,7 +44,7 @@ menu "Kernel features"
source "kernel/Kconfig.hz"
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
range 9 20
default "11"
--- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/powerpc/configs/85xx/ge_imp3a_defconfig
@@ -30,7 +30,7 @@ CONFIG_PREEMPT=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
-CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_ARCH_FORCE_MAX_ORDER=17
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
--- a/arch/powerpc/configs/fsl-emb-nonhw.config~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/powerpc/configs/fsl-emb-nonhw.config
@@ -41,7 +41,7 @@ CONFIG_FIXED_PHY=y
CONFIG_FONT_8x16=y
CONFIG_FONT_8x8=y
CONFIG_FONTS=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ARCH_FORCE_MAX_ORDER=13
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAME_WARN=1024
CONFIG_FTL=y
--- a/arch/powerpc/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/powerpc/Kconfig
@@ -845,7 +845,7 @@ config DATA_SHIFT
in that case. If PIN_TLB is selected, it must be aligned to 8M as
8M pages will be pinned.
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
range 8 9 if PPC64 && PPC_64K_PAGES
default "9" if PPC64 && PPC_64K_PAGES
--- a/arch/sh/configs/ecovec24_defconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/sh/configs/ecovec24_defconfig
@@ -8,7 +8,7 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_ECOVEC=y
--- a/arch/sh/mm/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/sh/mm/Kconfig
@@ -18,7 +18,7 @@ config PAGE_OFFSET
default "0x80000000" if MMU
default "0x00000000"
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
range 9 64 if PAGE_SIZE_16KB
default "9" if PAGE_SIZE_16KB
--- a/arch/sparc/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/sparc/Kconfig
@@ -269,7 +269,7 @@ config ARCH_SPARSEMEM_ENABLE
config ARCH_SPARSEMEM_DEFAULT
def_bool y if SPARC64
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
default "13"
help
--- a/arch/xtensa/Kconfig~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/arch/xtensa/Kconfig
@@ -771,7 +771,7 @@ config HIGHMEM
If unsure, say Y.
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
default "11"
help
--- a/include/linux/mmzone.h~arch-mm-rename-force_max_zoneorder-to-arch_force_max_order
+++ a/include/linux/mmzone.h
@@ -24,10 +24,10 @@
#include <asm/page.h>
/* Free memory management - zoned buddy allocator. */
-#ifndef CONFIG_FORCE_MAX_ZONEORDER
+#ifndef CONFIG_ARCH_FORCE_MAX_ORDER
#define MAX_ORDER 11
#else
-#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
+#define MAX_ORDER CONFIG_ARCH_FORCE_MAX_ORDER
#endif
#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
_
Patches currently in -mm which might be from ziy@xxxxxxxxxx are
arch-mm-rename-force_max_zoneorder-to-arch_force_max_order.patch
