From: Alistair Popple <apopple@xxxxxxxxxx> Subject: mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is not enough room for ZONE_MOVABLE on that node. Unfortunately this condition is not checked for. This leads to zone_movable_pfn[] getting set to a pfn greater than the last pfn in a node. calculate_node_totalpages() then sets zone->present_pages to be greater than zone->spanned_pages which is invalid, as spanned_pages represents the maximum number of pages in a zone assuming no holes. Subsequently it is possible free_area_init_core() will observe a zone of size zero with present pages. In this case it will skip setting up the zone, including the initialisation of free_lists[]. However populated_zone() checks zone->present_pages to see if a zone has memory available. This is used by iterators such as walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the free_list of each zone in each node, which are assumed to be initialised due to the zone not being empty. As free_area_init_core() never initialised the free_lists[] this results in the following kernel crash when trying to read /proc/pagetypeinfo: [ 67.534914] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 67.535429] #PF: supervisor read access in kernel mode [ 67.535789] #PF: error_code(0x0000) - not-present page [ 67.536128] PGD 0 P4D 0 [ 67.536305] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI [ 67.536696] CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 #461 [ 67.537096] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 [ 67.537638] RIP: 0010:pagetypeinfo_show+0x163/0x460 [ 67.537992] Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82 [ 67.538259] RSP: 0018:ffffc90001c4bd10 EFLAGS: 00010003 [ 67.538259] RAX: 0000000000000000 RBX: ffff88801105f638 RCX: 0000000000000001 [ 67.538259] RDX: 0000000000000001 RSI: 000000000000068b RDI: ffff8880163dc68b [ 67.538259] RBP: ffffc90001c4bd90 R08: 0000000000000001 R09: ffff8880163dc67e [ 67.538259] R10: 656c6261766f6d6e R11: 6c6261766f6d6e55 R12: ffff88807ffb4a00 [ 67.538259] R13: ffff88807ffb49f8 R14: ffff88807ffb4580 R15: ffff88807ffb3000 [ 67.538259] FS: 00007f9c83eff5c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 67.538259] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 67.538259] CR2: 0000000000000000 CR3: 0000000013c8e000 CR4: 0000000000350ef0 [ 67.538259] Call Trace: [ 67.538259] <TASK> [ 67.538259] seq_read_iter+0x128/0x460 [ 67.538259] ? aa_file_perm+0x1af/0x5f0 [ 67.538259] proc_reg_read_iter+0x51/0x80 [ 67.538259] ? lock_is_held_type+0xea/0x140 [ 67.538259] new_sync_read+0x113/0x1a0 [ 67.538259] vfs_read+0x136/0x1d0 [ 67.538259] ksys_read+0x70/0xf0 [ 67.538259] __x64_sys_read+0x1a/0x20 [ 67.538259] do_syscall_64+0x3b/0xc0 [ 67.538259] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 67.538259] RIP: 0033:0x7f9c83e23cce [ 67.538259] Code: c0 e9 b6 fe ff ff 50 48 8d 3d 6e 13 0a 00 e8 c9 e3 01 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 [ 67.538259] RSP: 002b:00007fff116e1a08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 67.538259] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f9c83e23cce [ 67.538259] RDX: 0000000000020000 RSI: 00007f9c83a2c000 RDI: 0000000000000003 [ 67.538259] RBP: 00007f9c83a2c000 R08: 00007f9c83a2b010 R09: 0000000000000000 [ 67.538259] R10: 00007f9c83f2d7d0 R11: 0000000000000246 R12: 0000000000000000 [ 67.538259] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [ 67.538259] </TASK> Fix this by checking that the aligned zone_movable_pfn[] does not exceed the end of the node, and if it does skip creating a movable zone on this node. Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@xxxxxxxxxx Fixes: 2a1e274acf0b ("Create the ZONE_MOVABLE zone") Signed-off-by: Alistair Popple <apopple@xxxxxxxxxx> Acked-by: David Hildenbrand <david@xxxxxxxxxx> Acked-by: Mel Gorman <mgorman@xxxxxxxxxxxxxxxxxxx> Cc: John Hubbard <jhubbard@xxxxxxxxxx> Cc: Zi Yan <ziy@xxxxxxxxxx> Cc: Anshuman Khandual <anshuman.khandual@xxxxxxx> Cc: Oscar Salvador <osalvador@xxxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- mm/page_alloc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/mm/page_alloc.c~mm-pages_allocc-dont-create-zone_movable-beyond-the-end-of-a-node +++ a/mm/page_alloc.c @@ -7951,10 +7951,17 @@ restart: out2: /* Align start of ZONE_MOVABLE on all nids to MAX_ORDER_NR_PAGES */ - for (nid = 0; nid < MAX_NUMNODES; nid++) + for (nid = 0; nid < MAX_NUMNODES; nid++) { + unsigned long start_pfn, end_pfn; + zone_movable_pfn[nid] = roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES); + get_pfn_range_for_nid(nid, &start_pfn, &end_pfn); + if (zone_movable_pfn[nid] >= end_pfn) + zone_movable_pfn[nid] = 0; + } + out: /* restore the node_state */ node_states[N_MEMORY] = saved_node_state; _
