The patch titled
Subject: mm/page_alloc: use accumulated load when building node fallback list
has been removed from the -mm tree. Its filename was
mm-page_alloc-use-accumulated-load-when-building-node-fallback-list.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Krupa Ramakrishnan <krupa.ramakrishnan@xxxxxxx>
Subject: mm/page_alloc: use accumulated load when building node fallback list
In build_zonelists(), when the fallback list is built for the nodes, the
node load gets reinitialized during each iteration. This results in nodes
with same distances occupying the same slot in different node fallback
lists rather than appearing in the intended round- robin manner. This
results in one node getting picked for allocation more compared to other
nodes with the same distance.
As an example, consider a 4 node system with the following distance
matrix.
Node 0 1 2 3
----------------
0 10 12 32 32
1 12 10 32 32
2 32 32 10 12
3 32 32 12 10
For this case, the node fallback list gets built like this:
Node Fallback list
---------------------
0 0 1 2 3
1 1 0 3 2
2 2 3 0 1
3 3 2 0 1 <-- Unexpected fallback order
In the fallback list for nodes 2 and 3, the nodes 0 and 1 appear in the
same order which results in more allocations getting satisfied from node 0
compared to node 1.
The effect of this on remote memory bandwidth as seen by stream benchmark
is shown below:
Case 1: Bandwidth from cores on nodes 2 & 3 to memory on nodes 0 & 1
(numactl -m 0,1 ./stream_lowOverhead ... --cores <from 2, 3>)
Case 2: Bandwidth from cores on nodes 0 & 1 to memory on nodes 2 & 3
(numactl -m 2,3 ./stream_lowOverhead ... --cores <from 0, 1>)
----------------------------------------
BANDWIDTH (MB/s)
TEST Case 1 Case 2
----------------------------------------
COPY 57479.6 110791.8
SCALE 55372.9 105685.9
ADD 50460.6 96734.2
TRIADD 50397.6 97119.1
----------------------------------------
The bandwidth drop in Case 1 occurs because most of the allocations get
satisfied by node 0 as it appears first in the fallback order for both
nodes 2 and 3.
This can be fixed by accumulating the node load in build_zonelists()
rather than reinitializing it during each iteration. With this the nodes
with the same distance rightly get assigned in the round robin manner. In
fact this was how it was originally until the commit f0c0b2b808f2 ("change
zonelist order: zonelist order selection logic") dropped the load
accumulation and resorted to initializing the load during each iteration.
While zonelist ordering was removed by commit c9bff3eebc09 ("mm,
page_alloc: rip out ZONELIST_ORDER_ZONE"), the change to the node load
accumulation in build_zonelists() remained. So essentially this patch
reverts back to the accumulated node load logic.
After this fix, the fallback order gets built like this:
Node Fallback list
------------------
0 0 1 2 3
1 1 0 3 2
2 2 3 0 1
3 3 2 1 0 <-- Note the change here
The bandwidth in Case 1 improves and matches Case 2 as shown below.
----------------------------------------
BANDWIDTH (MB/s)
TEST Case 1 Case 2
----------------------------------------
COPY 110438.9 110107.2
SCALE 105930.5 105817.5
ADD 97005.1 96159.8
TRIADD 97441.5 96757.1
----------------------------------------
The correctness of the fallback list generation has been verified for the
above node configuration where the node 3 starts as memory-less node and
comes up online only during memory hotplug.
[bharata@xxxxxxx: Added changelog, review, test validation]
Link: https://lkml.kernel.org/r/20210830121603.1081-3-bharata@xxxxxxx
Fixes: f0c0b2b808f2 ("change zonelist order: zonelist order selection logic")
Signed-off-by: Krupa Ramakrishnan <krupa.ramakrishnan@xxxxxxx>
Co-developed-by: Sadagopan Srinivasan <Sadagopan.Srinivasan@xxxxxxx>
Signed-off-by: Sadagopan Srinivasan <Sadagopan.Srinivasan@xxxxxxx>
Signed-off-by: Bharata B Rao <bharata@xxxxxxx>
Acked-by: Mel Gorman <mgorman@xxxxxxx>
Reviewed-by: Anshuman Khandual <anshuman.khandual@xxxxxxx>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@xxxxxxxxxxxxxx>
Cc: Lee Schermerhorn <lee.schermerhorn@xxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
mm/page_alloc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/page_alloc.c~mm-page_alloc-use-accumulated-load-when-building-node-fallback-list
+++ a/mm/page_alloc.c
@@ -6253,7 +6253,7 @@ static void build_zonelists(pg_data_t *p
*/
if (node_distance(local_node, node) !=
node_distance(local_node, prev_node))
- node_load[node] = load;
+ node_load[node] += load;
node_order[nr_nodes++] = node;
prev_node = node;
_
Patches currently in -mm which might be from krupa.ramakrishnan@xxxxxxx are
