The patch titled
Add IDE mode support for SB600 SATA
has been removed from the -mm tree. Its filename was
add-ide-mode-support-for-sb600-sata.patch
This patch was dropped because it is obsolete
------------------------------------------------------
Subject: Add IDE mode support for SB600 SATA
From: "Conke Hu" <conke.hu@xxxxxxx>
ATI SB600 SATA controller supports 4 modes: Legacy IDE, Native IDE, AHCI
and RAID. Legacy/Native IDE mode is designed for compatibility with some
old OS without AHCI driver but looses SATAII/AHCI features such as NCQ.
This patch provides users with two options when the SB600 SATA is set as
IDE mode by BIOS:
1. Setting the controller back to AHCI mode and using ahci as its driver.
2. Using the controller as a normal IDE.
What's more, without this patch, ahci driver always tries to claim all 4
modes of SB600 SATA, but fails in legacy IDE mode.
Signed-off-by: "Conke Hu" <conke.hu@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/ata/Kconfig | 12 ++++++++++++
drivers/ide/pci/atiixp.c | 17 ++++++++++++-----
drivers/pci/quirks.c | 19 +++++++++++++++++++
3 files changed, 43 insertions(+), 5 deletions(-)
diff -puN drivers/ata/ahci.c~add-ide-mode-support-for-sb600-sata drivers/ata/ahci.c
diff -puN drivers/ata/Kconfig~add-ide-mode-support-for-sb600-sata drivers/ata/Kconfig
--- a/drivers/ata/Kconfig~add-ide-mode-support-for-sb600-sata
+++ a/drivers/ata/Kconfig
@@ -27,6 +27,18 @@ config SATA_AHCI
If unsure, say N.
+config SB600_AHCI_IDE
+ bool "ATI SB600 IDE mode of SATA controller support"
+ depends on SATA_AHCI
+ default y
+ help
+ ATI SB600 SATA controller supports 4 modes: Legacy IDE, Native
+ IDE, AHCI and RAID. If this option is enabled, the contoller
+ will run in AHCI mode and use ahci.ko as it's driver, otherwise
+ it will work as an IDE controller using atiixp.ko as it's driver.
+
+ If unsure, say y.
+
config SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
depends on PCI
diff -puN drivers/ide/pci/atiixp.c~add-ide-mode-support-for-sb600-sata drivers/ide/pci/atiixp.c
--- a/drivers/ide/pci/atiixp.c~add-ide-mode-support-for-sb600-sata
+++ a/drivers/ide/pci/atiixp.c
@@ -318,7 +318,8 @@ static void __devinit init_hwif_atiixp(i
hwif->drives[0].autodma = hwif->autodma;
}
-static void __devinit init_hwif_sb600_legacy(ide_hwif_t *hwif)
+#ifndef CONFIG_SB600_AHCI_IDE
+static void __devinit init_hwif_sb600_sata(ide_hwif_t *hwif)
{
hwif->atapi_dma = 1;
@@ -331,6 +332,7 @@ static void __devinit init_hwif_sb600_le
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
}
+#endif
static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
{ /* 0 */
@@ -340,13 +342,16 @@ static ide_pci_device_t atiixp_pci_info[
.autodma = AUTODMA,
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
.bootable = ON_BOARD,
- },{ /* 1 */
- .name = "ATI SB600 SATA Legacy IDE",
- .init_hwif = init_hwif_sb600_legacy,
+ },
+#ifndef CONFIG_SB600_AHCI_IDE
+ { /* 1 */
+ .name = "ATI SB600 SATA (IDE mode)",
+ .init_hwif = init_hwif_sb600_sata,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
}
+#endif
};
/**
@@ -368,7 +373,9 @@ static struct pci_device_id atiixp_pci_t
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID, PCI_ANY_ID, (PCI_CLASS_STORAGE_IDE<<8)|0x8a, 0xffff05, 1},
+#ifndef CONFIG_SB600_AHCI_IDE
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, 1},
+#endif
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff -puN drivers/pci/quirks.c~add-ide-mode-support-for-sb600-sata drivers/pci/quirks.c
--- a/drivers/pci/quirks.c~add-ide-mode-support-for-sb600-sata
+++ a/drivers/pci/quirks.c
@@ -796,6 +796,25 @@ static void __init quirk_mediagx_master(
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
+#ifdef CONFIG_SB600_AHCI_IDE
+static void __devinit quirk_sb600_sata(struct pci_dev *pdev)
+{
+ if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+ u8 tmp;
+
+ pci_read_config_byte(pdev, 0x40, &tmp);
+ pci_write_config_byte(pdev, 0x40, tmp|1);
+ pci_write_config_byte(pdev, 0x9, 1);
+ pci_write_config_byte(pdev, 0xa, 6);
+ pci_write_config_byte(pdev, 0x40, tmp);
+
+ pdev->class = 0x010601;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_sb600_sata);
+#endif
+
+
/*
* As per PCI spec, ignore base address registers 0-3 of the IDE controllers
* running in Compatible mode (bits 0 and 2 in the ProgIf for primary and
_
Patches currently in -mm which might be from conke.hu@xxxxxxx are
add-ide-mode-support-for-sb600-sata.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
