The patch titled
Subject: phy/drivers/stm32: use HZ macros
has been removed from the -mm tree. Its filename was
phy-drivers-stm32-use-hz-macros.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Subject: phy/drivers/stm32: use HZ macros
HZ unit conversion macros are available in units.h, use them and remove
the duplicate definition.
Link: https://lkml.kernel.org/r/20210816114732.1834145-11-daniel.lezcano@xxxxxxxxxx
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Cc: Christian Eggers <ceggers@xxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Lukasz Luba <lukasz.luba@xxxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Cc: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
Cc: Peter Meerwald <pmeerw@xxxxxxxxxx>
Cc: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/phy/st/phy-stm32-usbphyc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/phy/st/phy-stm32-usbphyc.c~phy-drivers-stm32-use-hz-macros
+++ a/drivers/phy/st/phy-stm32-usbphyc.c
@@ -15,6 +15,7 @@
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/reset.h>
+#include <linux/units.h>
#define STM32_USBPHYC_PLL 0x0
#define STM32_USBPHYC_MISC 0x8
@@ -47,7 +48,6 @@
#define PLL_FVCO_MHZ 2880
#define PLL_INFF_MIN_RATE_HZ 19200000
#define PLL_INFF_MAX_RATE_HZ 38400000
-#define HZ_PER_MHZ 1000000L
struct pll_params {
u8 ndiv;
_
Patches currently in -mm which might be from daniel.lezcano@xxxxxxxxxx are
