[patch 143/192] procfs/dmabuf: add inode number to /proc/*/fdinfo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kalesh Singh <kaleshsingh@xxxxxxxxxx>
Subject: procfs/dmabuf: add inode number to /proc/*/fdinfo

And 'ino' field to /proc/<pid>/fdinfo/<FD> and
/proc/<pid>/task/<tid>/fdinfo/<FD>.

The inode numbers can be used to uniquely identify DMA buffers in user
space and avoids a dependency on /proc/<pid>/fd/* when accounting
per-process DMA buffer sizes.

Link: https://lkml.kernel.org/r/20210308170651.919148-2-kaleshsingh@xxxxxxxxxx
Signed-off-by: Kalesh Singh <kaleshsingh@xxxxxxxxxx>
Acked-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Acked-by: Christian König <christian.koenig@xxxxxxx>
Cc: Jann Horn <jannh@xxxxxxxxxx>
Cc: Jeff Vander Stoep <jeffv@xxxxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxxxx>
Cc: Suren Baghdasaryan <surenb@xxxxxxxxxx>
Cc: Minchan Kim <minchan@xxxxxxxxxx>
Cc: Hridya Valsaraju <hridya@xxxxxxxxxx>
Cc: Matthew Wilcox <willy@xxxxxxxxxxxxx>
Cc: Alexander Viro <viro@xxxxxxxxxxxxxxxxxx>
Cc: Kalesh Singh <kaleshsingh@xxxxxxxxxx>
Cc: Alexey Dobriyan <adobriyan@xxxxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
Cc: Michal Hocko <mhocko@xxxxxxxx>
Cc: Alexey Gladkov <gladkov.alexey@xxxxxxxxx>
Cc: Szabolcs Nagy <szabolcs.nagy@xxxxxxx>
Cc: Eric W. Biederman <ebiederm@xxxxxxxxxxxx>
Cc: Christian Brauner <christian.brauner@xxxxxxxxxx>
Cc: Michel Lespinasse <walken@xxxxxxxxxx>
Cc: Bernd Edlinger <bernd.edlinger@xxxxxxxxxx>
Cc: Andrei Vagin <avagin@xxxxxxxxx>
Cc: Helge Deller <deller@xxxxxx>
Cc: James Morris <jamorris@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---

 Documentation/filesystems/proc.rst |   37 ++++++++++++++++++++++-----
 fs/proc/fd.c                       |    5 ++-
 2 files changed, 34 insertions(+), 8 deletions(-)

--- a/Documentation/filesystems/proc.rst~procfs-dmabuf-add-inode-number-to-proc-fdinfo
+++ a/Documentation/filesystems/proc.rst
@@ -1920,18 +1920,20 @@ if precise results are needed.
 3.8	/proc/<pid>/fdinfo/<fd> - Information about opened file
 ---------------------------------------------------------------
 This file provides information associated with an opened file. The regular
-files have at least three fields -- 'pos', 'flags' and 'mnt_id'. The 'pos'
-represents the current offset of the opened file in decimal form [see lseek(2)
-for details], 'flags' denotes the octal O_xxx mask the file has been
-created with [see open(2) for details] and 'mnt_id' represents mount ID of
-the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo
-for details].
+files have at least four fields -- 'pos', 'flags', 'mnt_id' and 'ino'.
+The 'pos' represents the current offset of the opened file in decimal
+form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the
+file has been created with [see open(2) for details] and 'mnt_id' represents
+mount ID of the file system containing the opened file [see 3.5
+/proc/<pid>/mountinfo for details]. 'ino' represents the inode number of
+the file.
 
 A typical output is::
 
 	pos:	0
 	flags:	0100002
 	mnt_id:	19
+	ino:	63107
 
 All locks associated with a file descriptor are shown in its fdinfo too::
 
@@ -1948,6 +1950,7 @@ Eventfd files
 	pos:	0
 	flags:	04002
 	mnt_id:	9
+	ino:	63107
 	eventfd-count:	5a
 
 where 'eventfd-count' is hex value of a counter.
@@ -1960,6 +1963,7 @@ Signalfd files
 	pos:	0
 	flags:	04002
 	mnt_id:	9
+	ino:	63107
 	sigmask:	0000000000000200
 
 where 'sigmask' is hex value of the signal mask associated
@@ -1973,6 +1977,7 @@ Epoll files
 	pos:	0
 	flags:	02
 	mnt_id:	9
+	ino:	63107
 	tfd:        5 events:       1d data: ffffffffffffffff pos:0 ino:61af sdev:7
 
 where 'tfd' is a target file descriptor number in decimal form,
@@ -1989,6 +1994,8 @@ For inotify files the format is the foll
 
 	pos:	0
 	flags:	02000000
+	mnt_id:	9
+	ino:	63107
 	inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
 
 where 'wd' is a watch descriptor in decimal form, i.e. a target file
@@ -2011,6 +2018,7 @@ For fanotify files the format is::
 	pos:	0
 	flags:	02
 	mnt_id:	9
+	ino:	63107
 	fanotify flags:10 event-flags:0
 	fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
 	fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
@@ -2035,6 +2043,7 @@ Timerfd files
 	pos:	0
 	flags:	02
 	mnt_id:	9
+	ino:	63107
 	clockid: 0
 	ticks: 0
 	settime flags: 01
@@ -2049,6 +2058,22 @@ details]. 'it_value' is remaining time u
 with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value'
 still exhibits timer's remaining time.
 
+DMA Buffer files
+~~~~~~~~~~~~~~~~
+
+::
+
+	pos:	0
+	flags:	04002
+	mnt_id:	9
+	ino:	63107
+	size:   32768
+	count:  2
+	exp_name:  system-heap
+
+where 'size' is the size of the DMA buffer in bytes. 'count' is the file count of
+the DMA buffer file. 'exp_name' is the name of the DMA buffer exporter.
+
 3.9	/proc/<pid>/map_files - Information about memory mapped files
 ---------------------------------------------------------------------
 This directory contains symbolic links which represent memory mapped files
--- a/fs/proc/fd.c~procfs-dmabuf-add-inode-number-to-proc-fdinfo
+++ a/fs/proc/fd.c
@@ -54,9 +54,10 @@ static int seq_show(struct seq_file *m,
 	if (ret)
 		return ret;
 
-	seq_printf(m, "pos:\t%lli\nflags:\t0%o\nmnt_id:\t%i\n",
+	seq_printf(m, "pos:\t%lli\nflags:\t0%o\nmnt_id:\t%i\nino:\t%lu\n",
 		   (long long)file->f_pos, f_flags,
-		   real_mount(file->f_path.mnt)->mnt_id);
+		   real_mount(file->f_path.mnt)->mnt_id,
+		   file_inode(file)->i_ino);
 
 	/* show_fd_locks() never deferences files so a stale value is safe */
 	show_fd_locks(m, file, files);
_




[Index of Archives]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux