The patch titled
Subject: kfence: await for allocation using wait_event
has been removed from the -mm tree. Its filename was
kfence-await-for-allocation-using-wait_event.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Marco Elver <elver@xxxxxxxxxx>
Subject: kfence: await for allocation using wait_event
Patch series "kfence: optimize timer scheduling", v2.
We have observed that mostly-idle systems with KFENCE enabled wake up
otherwise idle CPUs, preventing such to enter a lower power state.
Debugging revealed that KFENCE spends too much active time in
toggle_allocation_gate().
While the first version of KFENCE was using all the right bits to be
scheduling optimal, and thus power efficient, by simply using wait_event()
+ wake_up(), that code was unfortunately removed.
As KFENCE was exposed to various different configs and tests, the
scheduling optimal code slowly disappeared. First because of hung task
warnings, and finally because of deadlocks when an allocation is made by
timer code with debug objects enabled. Clearly, the "fixes" were not too
friendly for devices that want to be power efficient.
Therefore, let's try a little harder to fix the hung task and deadlock
problems that we have with wait_event() + wake_up(), while remaining as
scheduling friendly and power efficient as possible.
Crucially, we need to defer the wake_up() to an irq_work, avoiding any
potential for deadlock.
The result with this series is that on the devices where we observed a
power regression, power usage returns back to baseline levels.
This patch (of 3):
On mostly-idle systems, we have observed that toggle_allocation_gate() is
a cause of frequent wake-ups, preventing an otherwise idle CPU to go into
a lower power state.
A late change in KFENCE's development, due to a potential deadlock [1],
required changing the scheduling-friendly wait_event_timeout() and
wake_up() to an open-coded wait-loop using schedule_timeout(). [1]
https://lkml.kernel.org/r/000000000000c0645805b7f982e4@xxxxxxxxxx
To avoid unnecessary wake-ups, switch to using wait_event_timeout().
Unfortunately, we still cannot use a version with direct wake_up() in
__kfence_alloc() due to the same potential for deadlock as in [1].
Instead, add a level of indirection via an irq_work that is scheduled if
we determine that the kfence_timer requires a wake_up().
Link: https://lkml.kernel.org/r/20210421105132.3965998-1-elver@xxxxxxxxxx
Link: https://lkml.kernel.org/r/20210421105132.3965998-2-elver@xxxxxxxxxx
Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Marco Elver <elver@xxxxxxxxxx>
Cc: Alexander Potapenko <glider@xxxxxxxxxx>
Cc: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
Cc: Jann Horn <jannh@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Hillf Danton <hdanton@xxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
lib/Kconfig.kfence | 1 +
mm/kfence/core.c | 43 ++++++++++++++++++++++++++++---------------
2 files changed, 29 insertions(+), 15 deletions(-)
--- a/lib/Kconfig.kfence~kfence-await-for-allocation-using-wait_event
+++ a/lib/Kconfig.kfence
@@ -7,6 +7,7 @@ menuconfig KFENCE
bool "KFENCE: low-overhead sampling-based memory safety error detector"
depends on HAVE_ARCH_KFENCE && (SLAB || SLUB)
select STACKTRACE
+ select IRQ_WORK
help
KFENCE is a low-overhead sampling-based detector of heap out-of-bounds
access, use-after-free, and invalid-free errors. KFENCE is designed
--- a/mm/kfence/core.c~kfence-await-for-allocation-using-wait_event
+++ a/mm/kfence/core.c
@@ -10,6 +10,7 @@
#include <linux/atomic.h>
#include <linux/bug.h>
#include <linux/debugfs.h>
+#include <linux/irq_work.h>
#include <linux/kcsan-checks.h>
#include <linux/kfence.h>
#include <linux/kmemleak.h>
@@ -587,6 +588,17 @@ late_initcall(kfence_debugfs_init);
/* === Allocation Gate Timer ================================================ */
+#ifdef CONFIG_KFENCE_STATIC_KEYS
+/* Wait queue to wake up allocation-gate timer task. */
+static DECLARE_WAIT_QUEUE_HEAD(allocation_wait);
+
+static void wake_up_kfence_timer(struct irq_work *work)
+{
+ wake_up(&allocation_wait);
+}
+static DEFINE_IRQ_WORK(wake_up_kfence_timer_work, wake_up_kfence_timer);
+#endif
+
/*
* Set up delayed work, which will enable and disable the static key. We need to
* use a work queue (rather than a simple timer), since enabling and disabling a
@@ -604,25 +616,13 @@ static void toggle_allocation_gate(struc
if (!READ_ONCE(kfence_enabled))
return;
- /* Enable static key, and await allocation to happen. */
atomic_set(&kfence_allocation_gate, 0);
#ifdef CONFIG_KFENCE_STATIC_KEYS
+ /* Enable static key, and await allocation to happen. */
static_branch_enable(&kfence_allocation_key);
- /*
- * Await an allocation. Timeout after 1 second, in case the kernel stops
- * doing allocations, to avoid stalling this worker task for too long.
- */
- {
- unsigned long end_wait = jiffies + HZ;
- do {
- set_current_state(TASK_UNINTERRUPTIBLE);
- if (atomic_read(&kfence_allocation_gate) != 0)
- break;
- schedule_timeout(1);
- } while (time_before(jiffies, end_wait));
- __set_current_state(TASK_RUNNING);
- }
+ wait_event_timeout(allocation_wait, atomic_read(&kfence_allocation_gate), HZ);
+
/* Disable static key and reset timer. */
static_branch_disable(&kfence_allocation_key);
#endif
@@ -729,6 +729,19 @@ void *__kfence_alloc(struct kmem_cache *
*/
if (atomic_read(&kfence_allocation_gate) || atomic_inc_return(&kfence_allocation_gate) > 1)
return NULL;
+#ifdef CONFIG_KFENCE_STATIC_KEYS
+ /*
+ * waitqueue_active() is fully ordered after the update of
+ * kfence_allocation_gate per atomic_inc_return().
+ */
+ if (waitqueue_active(&allocation_wait)) {
+ /*
+ * Calling wake_up() here may deadlock when allocations happen
+ * from within timer code. Use an irq_work to defer it.
+ */
+ irq_work_queue(&wake_up_kfence_timer_work);
+ }
+#endif
if (!READ_ONCE(kfence_enabled))
return NULL;
_
Patches currently in -mm which might be from elver@xxxxxxxxxx are
